CD/DVD-ROM not recognized since the installation of Vista, without errors

Similar Questions

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

  ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

  Is not fully compatible with win7, some patches are available from ATI

  http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• Does anyone have suggestions on what to do when the Windows 7 Installation DVD is not recognized by the DVD player.

  I'm trying to do a custom installation of Windows 7 Professional 32 - bit on my Dell Inspiron 530, which is running Windows Vista Home 32 bit.  I ran the Windows 7 Upgrade Advisor, which was positive.

  The DVD player does not recognize the installation of the new (purchased at microsoft) DVD, although he acknowledges other CD and DVD.
  I tried to restart the computer and also the start of the player directly in the BIOS.
  In the BIOS I have the following message:
  "No available boot device.
  Press the ENTER key to try again
  SATA-0: installed
  SATA-1: installed
  SATA-4: no
  SATA-5: no

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

  If this does not work, try to check the manufacturer of the optical drive to the firmware updates available.

• Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

  Hi all

  I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

  I installed the latest BIOS v2.50 as well as the latest Windows patches.

  To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

  I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

  Mounting frame is also OK (tested with the original Toshiba DVD ROM)

  Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
  What is generally a problem

  Thanks for reading my ad and you answers or advice

  Klaus

  Hello

  It won't be very easy get your new work of drive on your S1, I will explain why:

  Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
  their place according to the requirements of the laptop.
  Three settings are available: master/slave/CableSelect

  Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
  a disc factory settings in bulk comes as a disk Primary Master or CS.

  There are two options how to get to missing jumpers to make it work.
  (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
  (2) by a bridge of material on some pins to the back of the drive.

  As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

  As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
  According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

  start of quote:
  Dear Sir.

  The drive is detected beeing as a master drive.
  This setting cannot be changed. Are there no rider to do so.
  How mount you the device to your laptop, it's up to you.
  It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

  Kind regards
  end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

  As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

  Concerning

  chain

• HP Pavilion DV6 DVD disc not recognized and the media player does not work

  My HP DV6 is having... issues.  Windows 7.  A little history:

  Recently (2 months ago) he quit the installation of the updates of Windows and would download 3 whenever I stop.  HP support could not help or Fix - It programs work.  Had to restore it to factory default and that solved THIS problem.

  Reading card camera (which I have done before) attempted recently, but he did not read / was not recognized.  Today, tried to launch a DVD, and when it does not start automatically, I discovered that it is not recognized.

  Tried HP Support Assistant, who told me that the model # of the DVD drive that I was using, then proceeded to say there was something wrong with the driver... and he couldn't fix it.

  More?  (Windows Explorer, not Internet) will be often expire or crash...

  I have Norton Internet Security with live update and have yet to have virus problems.

  Any help or questions greatly appreciated!

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit in the programs list.
     
     If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

• DVD rom not detected in the Bios & windows

  Mr President, in my computer the dvd rom is not detected in the Bios & windows. Send me a PSE with solution please.

  Hello

  1. which version of the windows operating system is installed in the computer?

  2. What is the brand and model of the computer?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I also suggest you to connect with the computer manufacturing and update drivers for BIOS.

• CD/dvd-rom not recognized Vista

  I uninstalled and do reinstall the driver for my dvd player. I see that I have the disc but it will not read anything. I can hear it trying but nothing appears. I can not burn on raw either. I need help and Mr. fix, that it does not download for some reason any.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD/DVD drive not recognized inside the virtual machine

  No matter what I do, I can't get my VM (XP) to recognize the CD/DVD drive. I am running version 2.0.6 of merger and under Mac OS X (10.5.8) on a MacBook Pro. I did a right click on the CD icon in the lower right corner of the computer virtual window, then select 'connect' CD/DVD - I see while the disc turns black (which indicates it's supposed to be connected). I launch Windows Explorer in my virtual machine, but I do not see the CD/DVD drive listed anywhere! Help, please. I have the VM settings to connect to the physical CD/DVD (DVD-R MATSHITA UJ-875) drive. Thanks in advance.

  Take a look at: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs

• DVD - ROM not recognized with setting of M/S

  Hello, I just bought a DVD SD-R2412 drive to replace my dead drive (same model). However, my old drive was CSEL type and this news is M/S. I didn't know there were differences in the same model. This new drive is not recognized by Windows XP (SP2) and disappear the second IDE controller. In addition, it is not possible to boot from the CD, so I guess that the BIOS is also not recognize the drive.

  I saw an exchange of views on the reverse (CSEL M/S, new old) and some solutions for this case, but I have not seen all the comments on my problem.

  My guess is that the drive is configured as a slave and the BIOS is not able to recognize in this position. If so, the question would be if there is a way to configure the drive M/S to act as a master.

  Any ideas?

  Thank you.

  Hello

  It will be very interesting to know what unit of Toshiba you have. As far as I know, the drive is already set to slave, but I put now on exactly the position of the rider. However, take a look on the label which is located on the drive. You can find a picture how to affect the small rider master or slave.

  Best regards

• cd/DVD drives not recognized by the computer.

  Some full scans there is our operating system to xp does not recognize our 2 dvd/cd players after a full scan, by security essentials.

  We went into the control panel to check the cd/dvd drivers... and they were gone.  Then we went in the 'my computer' window, and neither one of them were there either.  It's like they were never there.  We can somehow reset something to collect, to use?

  Hello

  I see that the CD is missing on the computer.

  1. You did changes to the computer before the show?
  2. The computer is connected to a network?
  3. Is detected in Device Manager?

  Device Manager provides a graphical display of the hardware installed on the computer, as well as the device drivers and resources associated with this material. Using the Device Manager provides a central point to change the way the hardware is configured and interacts with the microprocessor of the computer.

  To access Device Manager, try the following steps:

  Click Start, click run, and then type devmgmt.msc.

  Note:

  Let us know the result.

  Now, you can read the following article and try the steps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following articlehttp://support.microsoft.com/kb/322756

  If the problem persists, or you need help with Windows let us know.

• DVD Player reads discs since the installation of explore 9 on vista operating system

  My laptop dvd player will not play discs from installation to explore 9 on the vista operating system.  The light showing a disc in the drive, the disc drive is in the Control Panel, but the disc cannot be read. He asks me to insert a readable disc.   I've restored my system, still does not.

  Someone knows how to fix this?

  Hello

  Give this link a glance and follow the steps listed by SpiritX MS MVP. http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-cddvd-drive-doesn

  I hope this helps!