CD/dvd-rom

I use sony vaio, I upgraded from vista to windows 7 proff, I can't access the cd/dvd-rom, everything shows fine, driver works correctly, but it's not detected...

can someone give me pls a solution...

Hello

It's Vista forums and it should really be in the Windows 7 forums.

Answers - Windows 7 Forums (and others)
http://answers.Microsoft.com/en-us/default.aspx

================================================

As the system originally had a different version of Windows do you run Upgrade Advisor and
see the compatibility for CD/DVD compatibility Center (and other devices according to the needs).

Windows 7 Upgrade Advisor - Please run this now. http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

Also check the Compatibility Center (for the main devices)
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

Check with the system manufacturer and the manufacturer of the device for more information about the drivers for Windows 7.
(BIOS, chipset of low-level drivers and other main device drivers).

-------------------------------------------

Check these:

The DVD player does not work after I installed Windows 7 - here are the different readers from Sony
However the same issue could have an impact on your drive.

http://support.Microsoft.com/kb/975270/

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116

-------------------------------------------------------

If the system can run Windows 7 AND there are drivers for the devices that these might help:

References to Vista also apply to Windows 7.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951


Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

    Version of Windows 10 Home 1607 (Build 14393.187)

    Hello

    After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
    The D: drive does not appear in Windows Explorer,
    CD-Audios and videos / DVDs do not work.

    In the Device Manager, the following legacy status error message appear:
    "Windows cannot start this hardware device because its configuration information.
    (in the registry) is incomplete or damaged. (Code 19). »

    Could you tell me how to solve this problem?
    Thank you.

    The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
    I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

    More information here:
    http://www.borncity.com/blog/2007/08...-verschwunden/

  • Satellite 1800-400: need DVD - Rom

    I'm looking for a dvd - rom for a Satellite 1800-400. Where can I get one?

    Hello

    If you check the manuals for Satellite 1800, you will see that this camera comes with different drives. One of them is SD-R2002. Google all over the place. You will find a lot of online shops where you can order one. Another solution is the Toshiba service partner.

    By the way: check the ebay also.

    Good bye

  • CD / dvd rom compatibility to Pro 4600

    Hi, anyone know what cd/dvd rom combo drive is compatible with the satellite Pro 4600? I know that a combo drive is installed as standard in a variant of my machine. When I think about buying is the Toshiba SD-R2102 or SD-R2412.

    Hello

    My opinion is you should contact Toshiba authorized Service partner. Here, you can get the best information about new hardware parts and witch one is sufficient for your type of laptop.

  • Re: Which CD-ROM/DVD-ROM drive will fit in my Toshiba protégé M700 Tablet

    My Toshiba protégé M700 Tablet came without a CD/DVD-Rom drive. What brand/model will fit in this machine and where is the best (and cheapest) place to the source of this element.

    Best regards

    Don

    Hello

    I found some info that Portege M700 comes with drive of DVD Super-Multi Panasonic UJ-852STJ-Z.
    I wonder your one comes without optical drive.
    Another device is placed instead of ODD?

  • Tecra 8100 - CPU max, DVD - ROM and BIOS update issues

    1. I have a 500 MHz processor on my 8100. I would like to upgrade to maximum capacity. I think it's 800 MHz since it is the highest, the series went to.
    But if it's 800 MHz, any Mobile PIII on this frequency do? Or should I check for special settings of the processor?

    2. I don't have a floppy, or ways to get drive one. And I'm not going to ebay one just for an update of the BIOS. Any ideas? A bootable CD with the files will do?

    3. What is the location of the DVD-ROM and what alternative models can I use? The 8200 went up to 8 x DVD - RW. Could I go further?

    Thank you. I hope that my post is OK like this instead of three different positions.

    1 take a look at the other Tecra 8100 models to determine which processors are compatible.

    2. I don't think that would work a bootable CD, you must follow a special procedure to update the BIOS and requires a floppy drive. If there is a version of Windows, you must use that instead.

    3 upgrade the DVD player can be difficult because you must use the correct master/slave settings, and it must have the same design of the façade of the original.

    Personally, I'm selling the laptop and buy a second hand faster one. It can work out to be cheaper.

  • Slim SelectBay DVD - ROM drive

    I recently bought a second hand Satellite Pro, but it seems to be without a DVD player and has only a weight saving plastic 'trick' in the Slim Selectbay.
    I know that my laptop is now discontinued, but it is anyway to acquire a Slim SelectBay DVD - ROM drive, because they are not for sale in the "Accessories" section.

    Hi Mikey

    In my opinion, you should contact partner in your country. They can order each hardware component or any part of the accessories for each model of laptop computer independent of how old the model has.

  • Toshiba DVD - ROM SD-R6112

    Hello

    I have a Toshiba Satellite SA60-352, and I have a little problem with my Toshiba DVD - ROM SD-R6112.

    Sometimes when I insert a cd or a DVD-Rom dvd starts to spin but dusn, t find the cd or the dvd.

    Then I open the DVD-rom and close it, then the DVD-rom works very well.

    I have a Toshiba DVD - ROM SD-R6112 with firmware 1515

    It is not a big problem, but if it can be solved, that would be great!

    I use windows XP PRO I also tried a system restore but I stil have the same problem with the DVD - ROM Toshiba SD - R6112

    Greetings
    Robert Huijser

    Hello

    In my opinion, the only thing you can try is to clean the lens. This has happened with any DVD or CD?

  • DVD + RW disc in the DVD - Rom drive

    I have a Toshiba SD-M1222 DVD - ROM drive. I recently bought a new machine DVD + RW internal separate.
    Discs recorded on DVD + RW not reading no problem in my other internal DVD players, but when I try to play them on my DVD-Rom on the PC, I get a message "disc not recognized", even though I have set up the record to be compatible with other players.
    Is there a way I can get the DVD + RW discs to play on this DVD - Rom drive?

    Hello

    Sorry but there is no way to change this. These are two different formats. I have the same situation with my Satellite.

    If you want to have more information about DVD formats google everywhere.

    Good bye

  • Driver for DVD ROM SD-R1312 need help

    After moving to another apartment, I lost my driver CD Toshiba DVD. Without it, I can't use my DVD more. Please help me. I looked across the Net and in the Toshiba Download Center, but I'm not.

    DVD ROM SD-R1312

    Driver can send to:
    [email protected]

    Thank you very much

    Hello

    What laptop you have and which system is used?

    Normally you don't need an extra DVD driver except DVD RAM is used!

    Is there rather than any failure with the DVD? Why can't I use it more?

    Please write some more information!

    Goodbye, TOK

  • DVD - rom only reads CD

    My DVD-rom will not read the DVD. Please help me

    I put t know how to help except with tip: try to clean the lens.
    We know this will help you.

  • Satellite A200 - HD DVD ROM is not working

    Hello

    Can someone give me advice what to do with my HD DVD ROM It's playback discs after departure upward but then if I don't play anything for a while (30 minutes or 1 hour) and then try to play HD DVD ROM stopped reading anything and the laptop became frozen. Sometimes it even stops with the error message.

    If I restart my computer then HD DVD ROM still works but for a short time.

    What should I do?

    Kind regards
    Olga

    You have cd/dvd utilities in the system tray? Maybe they are causing a problem.

    Try to remove the CD/DVD filters in the registry.
    When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

    (1) run Regedit (start-> Run-> Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

    This utility can remove the filters for you:
    http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

  • Satellite A205-S6808 corrupt driver CD-ROM/DVD-ROM - Code 39

    My driver is corrupted for my CD-ROM/DVD-ROM drive.

    There is absolutely no support for my model on the Toshiba homepage.
    I tried to download the drivers for the L L505 series since my tech friend said that he must have worked. He did not.

    The parade of device upward, but I get a message from missing or corrupt windows driver.
    I am running win 7 32 bit and the DVD drive is the same one that came installed when I bought the laptop.

    This is the message I get "Windows cannot load the driver for this hardware device.
    The driver may be corrupted or missing. (Code 39) »

    CAN ANYONE HELP?

    Hello

    I m a bit confused how you managed to download the CD/DVD driver for the STRANGE internal (optical disc).
    The point is that all Windows operating systems contain own driver Microsoft ODD that controls the CD/DVD drive.
    That is why it s not necessary to load/install the drivers for the CD/DVD drive.

    I think it s a registry problem.
    You should first go to Device Manager and should remove the CD/DVD of the system drive.

    Next step is cleaning the registry.
    Start regedit and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    After this restart of the unit
    Should work

    Welcome & good luck

    PS; It is a model of cell phone US and all the drivers are located on the Toshiba U.S. page.

  • Satellite P10-304-DVD-ROM/CD-RW questions!

    Hello world

    I own one of the original computers Satellite P10-304, which has a DVD-ROM/CD-RW combo drive. For these last months, we have one or two problems with that. It was a little skittish in which CD it reads, but in the last days he almost completely stopped read correctly (audio/data) CD / DVDs. He doesn't seem to know they are there. However, the Player opens and runs well, as if it were playing the CD, but nothing happens on the PC.

    Curiously, I then looked on the list of the system, and the DVD-ROM/CD-RW driver had an excalamation mark. Even more curiously, the pilot was called TOSIICA! DWD something or other, when I'm sure it should have been DVD TOSHIBA etc.etc. Following the instructions, I uninstalled and then tried to reinstall, but it does not appear now when I try to add hardware.

    Confusing.

    I would be very grateful if anyone has any suggestions?

    See you soon,.

    Ian.

    Hello

    It looks like a car damage registry entry.
    But that is only my suggestion. The other possibility is broken (lens calibration problem) by car.
    You say that you have already removed the drive from the Device Manager, but the peut t OS recognizes the drive again. Well, in this case one of the possibilities is to use the System Restore tool or retrieve the device with the recovery CD.
    But if the drive is broken recovery procedure doesn t help. In this case, only the replacement of the drive can solve this problem.

  • Satellite P10 problems with Mat * a DVD ROM

    Hello

    I have a problem with my P10,
    I bought it for 2 months and 4 months ago my
    Carpet * a DVD ROM does strange things.
    When I try to copy a CD for example, it reads the cd source, after I put in those recordable, it starts to burn and suddenly it stops, says ERROR (Event Viewer: error on Controller\Dev01\CD-ROM) and my Combo drive is presented as a 'simple' DVD - RAM on Solution Explorer drive.

    Sometimes it won't read movies on DVD or CD so I have
    to restart the P10 and generally it can read the disks after that.
    So is my faulty drive, the card mother or just me?
    Have been looking for a new driver, but there is just a
    DVD-RAM, no driver for the drive itself.

    Hello

    Maybe the contact of the cable to the controller and CD player is loose. The error message said you it should be good!

    Your P10 is under warranty so bring a call Toshiba and it need to be repaired or a Service partner!

    Hans Bye

  • Satellite P20 DVD ROM drive may not be recognized

    Hello

    I just replaced my DVD ROM drive, but I had a problem.
    It is a new DVD rom drive I ordered at TOSHIBA also.
    It could not be detected by Windows:
    -Tried to check on Device Manager, not detected
    -Tried to reload the driver, the same problem
    Note:
    Whenever I tried to re - insert the disc, the blue light in the control panel of my P20 beds (I understand, which means that the P20 detects the drive) but I don't understand, is that why Windows XP does not detect it or it does not alarm or error messages.

    Any help?

    Thank you

    Hello

    Try to use the Add Hardware option.
    This question is very strange, but I read on some sites, sometimes a whole new OS install CD player, brings back to life.

Maybe you are looking for

  • Print data LabVIEW using the MATRIX printer?

    How to program in LabVIEW such as some data may be printed matrix printer? p/s: the matrix printer (EPSON TM - U220) is connected to the computer via a serial port. I thank very you much for the replies... =)

  • Error code 08 x 80070715, can't uninstall it or reinstall MSE

    When I turn my computer on, I get a error code 0 x 80070715 and someone helped me, but it did not work. I came across the safety.live for 2 hours and no corrupt files.  I can't uninstall ms security essentials reninstall it nor can I install another

  • How to install it?

    Hi, I just bought a used router WRT54G ver2, but with no sense and not a clue on how to install it.  I have phone/cable internet connection.  Please help ASAP!  Had been using a connection of neighbours for my Ipod touch and lost the connection yeste

  • Implementation of collapsible list, cannot set field

    Hello I implement foldable list by using managers and field: -When the cell is developed, a data provider returns a list of the fields to add as the child cells, and they are inserted into the vertical field Manager. -When the cell is reduced, the ch

  • Keyboard does not work with hotmail since rebranding

    Hotmail and keyboard Hotmail still has a slow/delayed response when you type this year but now since the rebranding of hotmail, my keyboard does not work in hotmail.  I need to hit each button several times until the key is recognized.  The delay was