CD/DVD unit has stopped working.

Similar Questions

• Equium A210 - after that set BIOS to update the DVD player has stopped working

  Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

  I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
  Someone at - it solutions for getting the DVD drive working again?

  Thank you

  Hello!

  The CD/DVD drive is listed in Device Manager? You see an error code?
  If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

  Try to load the default settings in the BIOS.

  Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• What can I do this message-"Toshiba DVD Player has stopped working"

  Hello

  My DVD drive used for good work... and then I installed iTunes.
  He then worked for a while, but only by using "Run as Administrator".

  After a few weeks I started getting the message "Toshiba DVD Player has stopped working".

  I uninstalled iTunes - and uninstalled and then re-installed DVD player - but it still doesn't work!
  Any solution please?

  Thanks in advance for your help.

  Ms. Q_reeus

  My solution is to remove a Toshiba DVD drive and install VLC player. You can get it for free.
  It can play all video formats, and you don't need additional codecs.

• DVD player has stopped working

  I am running Vista Home Premium. My ATAPI DVD drive has stopped working. Device Manager shows it, drivers are updated, I tried Microsoft Fixit, nothing seems to work. I read about this problem, seems a lot of people have the same problem with no fix, what do I do?

  I am betting its windows. So what is my options, buy windows 7. Maybe a different o/s. How many problems like mine have had to deal with?

  Absolutely not... If the question is the disc or other material so you are stuck with a system
  You can not install it on. And there may be serious flaws that are too expensive to repair.

  Previously published several ways to use a variety of boot floppies to see if the driver will be
  actually boot outside of Windows. If this isn't the case, then you have a more serious problem. If it isn't
  startup then you should re - install Vista to be sure there is no other problems with the
  disc before any thought of the upgrade.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• create dvd Windows has stopped working suddenly.

  in add items from the DVD window, the system suddenly crashes and I get the message... quote Microsoft Windows... next line... Windows DVD maker has stopped working... next para... A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. Unquoteemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi toofanmail,

  1. you remember to make changes to the computer before this problem?

  2. you have any third-party DVD burning software installed on the computer?

  If you have any third-party CD/DVD burning software, uninstall them temporarily & check if Windows DVD Maker works correctly.

  You can also check the event log to find out what is causing the problem.
  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Also check out the link:

  Solve problems with creating a DVD-Video DVD Maker usingWindows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• create dvd Windows has stopped working

  Just curious to know if anyone has the answer on how to fix the Windows Dvd maker when it comes up with a message "stopped working" and then it stops... ! How the hell can this be corrected, it seems like whenever there's an update this message comes on and usually I can go into system restore and it works afterwards... But this time his works ANY little matter what I do...

  If anyone can help I would appreciate it certainly...

  Just curious to know if anyone has the answer on how to fix the Windows Dvd maker when it comes up with a message "stopped working" and then it stops... ! How the hell can this be corrected, it seems like whenever there's an update this message comes on and usually I can go into system restore and it works afterwards... But this time his works ANY little matter what I do...

  If anyone can help I would appreciate it certainly...

  ===========================================
  No guarantee but maybe the following link would be worth a visit:

  DVD Maker has stopped working
  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/edcb015f-9431-4d89-95e8-531db1f26c77

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite A300 - DVD player has stopped working

  Hello

  The DVD in my A300 drive has stopped working. I don't find the driver in the control panel. The drive does not appear in my computer...

  Does anyone have an indices which me 100km of a service centre!

  Michael

  Hello

  If you didn t do a backup before deleting upper and lower filters that you can t restore it. This could be a bit difficult so, normally, you should always make a backup before you change or delete something in the Windows registry.

  As Akuma writes, you can try the system restore. Maybe it will work

• Windows DVD Maker has stopped working

  I'm running Windows 7 Home Premium and burn DVD with Windows DVD creation without problem. All of a sudden it has stopped working, I returned the video required (always in format avi.) and press next... Ready to burn the screen appears and then the message "(Windows DVD Maker a cessé de travailler, en recherchant les solutions) shows." He can find no solution, and then tells me to close the program. Is anyone out there can help, because it's more frustrating.

  I'm running Windows 7 Home Premium and burn DVD with Windows DVD creation without problem. All of a sudden it has stopped working, I returned the video required (always in format avi.) and press next... Ready to burn the screen appears and then the message "(Windows DVD Maker a cessé de travailler, en recherchant les solutions) shows." He can find no solution, and then tells me to close the program. Is anyone out there can help, because it's more frustrating.

  ==========================================
  There are many types of. AVI files, and some can
  have compatibility problems. . WMV is the most reliable
  format to import into Movie Maker and DVD Maker.

  It is possible that one or more of your. Source AVI
  files is damaged or incompatible, but disable all
  filters in DVD Maker before burning the DVD
  may be worth a try...

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

• CD/DVD drive has stopped working and now not recognized in 'My Computer'

  I have a HP Pavilion computer to office model a6109n, product number GG038AA, S/N CNH7250K0M. I've been running Windows 7 for 2 years. My CD player recently stopped working. I can't attribute this failure to any specific event that would have led to it.  When a CD is inserted, the green light comes on for about 6 seconds then turns off. The CD player is not long represented on the 'My Computer' to readers list. The CD drive appears in Device Manager. I tried to roload the driver for CD drive, Windows gave a message stating that the best driver is already installed. I have no error message and ran three programs different viruses with no problems. I've also updated Windows available current configuration that has not solved the problem. Thinking it was a hardware problem, I checked the CD drive cable connections and that did not help.  I replaced the CD drive with a new drive for HP and had the same symptoms. I returned the new CD player and he traded for an external CD drive and had the same symptoms in all USB ports. I tried every USB port with a flash player and the flash player saved on my computer in all USB ports. If my CD drive is being recognized by the Device Manager but not in my computer. It's okay if it's an internal or external drive. Everything else on the computer works fine. More troubleshooting ideas?  Thank you.

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Check if the drive works now.

  If it still does not work, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• Satellite P300-156: CD/DVD player has stopped working

  Hi people,

  I have a P300-156 and since I bought it, I had a problem with the DVD recorder... ok I know I should take that back!

  Sometimes when I press the eject button, that nothing is happening outside the orange light flashes and continues to blink. When this happens that I lose the drive in my computer and the only way to make it work again is to restart the laptop.

  Usually, it works when I reboot then stops working, but it doesn't also sometimes from the restart.

  Someone at - it ideas.

  Thank you

  Dan

  Hello!

  Have you looked on the Toshiba site for an update of the firmware? Search on the Toshiba site for an update, maybe this will solve your problem.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  However, I think it could also be a hardware problem that your drive is defective. Then I'd go to a local ASP. A technician can check your laptop.

  Good bye

• DVD player has stopped working on my HP laptop

  Application of HP laptop.

  I have a laptop model dv6850ei.

  DVD player stopped working and does not read the data.

  DVD drive is Lightscribe Super Multi DVD Writer with support Double layer.

  Please advise how to initiate.

  Kind regards

  Vijay Doke.

  I have a laptop model dv6850ei.

  DVD player stopped working and does not read the data.

  DVD drive is Lightscribe Super Multi DVD Writer with support Double layer.

  Please advise how to initiate.

  Kind regards

  Vijay Doke.

  Download the repaired hardware.

• Acer aspire V5_471PG cd/dvd Player has stopped working

  Hello

  My portable DVD (Aspire-V5-471PG) acer drive is stopped working, can't load/detect the drive. When I pressed the button, the DVD player will not come out. My warranty until December 2015, how can solve this problem, please help me, thank you very much. ^_^

  There is a high probability that it is a hardware problem. As your laptop is still under warranty, we recommend to contact the nearest Acer service center by using the following link for further assistance:
  http://us.Acer.com/AC/en/us/content/service

  Hope this will help you.

• my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

  drive is Matshita DVD-RAM UJ-850 s a SATA drive

  I use windows Vista

  Driver provider Microsoft

  Day 21/06/2006

  Version 6.0.6002.18005

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CREATE DVD WINDOWS HAS STOPPED WORKING. IT CRASHES RIGHT AFTER THAT I CHOSE THE CLIP AND CLICK NEXT.

  WHENEVER I USE DVD MAKER, IT CRASHES. THIS IS THE ERROR

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DVDMaker.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02385
  Fault Module name: ASAudio.ax
  Fault Module Version: 1.3.1.98
  Timestamp of Module error: 48119577
  Exception code: c0000005
  Exception offset: 00010416
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  DON'T KNOW HOW TO FIX IT? CAN SOMEONE HELP ME?

  Hello jael_silva10,

  Thanks for posting on the Microsoft answers Forum.

  Click the KB article number below to view the CD/DVD issues KB article.

  KB Article ID: 929461 -CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  There is a DIFFICULTY HIM that will run automatically if you want to try or you can try the manual resolution.
  This should help with your problem of DVD.
  If please reply back and let us know the results.
  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• E1505 cd/dvd drive has stopped working

  suddenly, my cd/dvd drive doesn't work! It will not read any dvd or cd.  It is a TSSTcorp DVD +-RW TS - L532B.