CD DVD WILL NOT READ OR WRITE. D: IS NOT ACCESSIBLE DUE TO THE I/O DEVICE ERROR

Similar Questions

• Save the 0x8078002A error code. The request could not be performed due to the i/o device error (0x8007045D).

  I tried to backup my C folder on a hard disk extrenal and received the following message:

  
  OT: Backup failed Windows7 0x8078002A error Code.
  Quote
  One of the files of backup could not be created (0x8078002A). The request could not be performed due to the i/o device error (0x8007045D).
  End of quote
  Can someone advise me?
  Nitin

  Hello

  Method 1
  Check the shadow copy Volume service in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. Locate the Volume Shadow Copy service

  Make sure that the startup type is automatic. Steps to set the auto services

  a. Locate the service

  b. right-click on the service

  c. If the service is stopped and then starts the service

  d. Select Properties

  e. and in startup type, select automatic

  Method 2
  Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error":http://support.microsoft.com/kb/952272 (for Windows 7)

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• End action will not run due to the action of late about final chapter

  I'm still doing my first project, and I get this error message: end action will not run because of the end about final chapter action.

  My calendar:

  I have a unique calendar consisting of a couple of reviews. There is a "chapter Starting Point" yet and 3 additional Points of chapter, I added.

  My goal:

  • A main Menu with
    • A 'Play' button that simply plays the entire timeline, beginning to end, and when finished go back to the main Menu.
    • A 'Scènes' button which brings up a submenu
  • A submenu with 4 buttons of chapter, which each would play a chapter in the timeline and return to the same/auto submenu when finished.

  My end Actions:

  It seems that the end Action is necessary for what is defined. Thus,.

  • The Action of 'end' of the timeline is to return to the main Menu.
  • The Action of 'end' for each chapter in the timeline must return to the submenu.

  My flowchart

  • First thing that works is the main Menu.
    • Links Play button of the timeline (which the end action is back to the main menu).
    • The scenes in the submenu button links
  • In the submenu, each chapter button links to the chapter Point suitable in the timeline (each chapter has an end action to return to the submenu).

  All of this makes perfect sense to me and it reflects exactly what I want to do. If clearly, it won't work!

  When I check my project, I get the error mentioned above. I do not understand how it is even possible to avoid this error: your timeline MUST have an end action, your timeline must have at least a chapter point and each chapter MUST have an end action.

  Thus, by definition, it seems that still

  • REQUIRES the timeline for action to end,
  • REQUIRES the last chapter on the timeline to have an end action, and
  • Gives you an error when you do what it takes.

  What the...?

  My solution

  I was finally able to work around the problem by creating a playlist of "chapter" for each chapter, that is, I created a "Chapter 1 Playlist" where the content has been a link to the chapter Point 1, a "Chapter 2 Playlist" where the content has been a link to Chapter 2 Point, etc.

  Then in my submenu, instead of linking to a Chapter Point, I've linked to a list of reading chapter instead and in each Chapter Playlist I put an end to "return to the submenu" action

  It worked - but it really seems kludgy and I can't help but shake the feeling that I do something wrong or I'm doing something good?

  Your "Workaround" is the current main method. Chapter Playlists are a "function". Yes, it seems kludgy, but it avoids the use of substitutions, which are necessary for your first method and cause many headaches without end users.

  Chapters DO NOT need action to end and your workaround solution, should not have their.

  Main timeline, end to the main menu action.

  Chapter playlists, end to the submenu action.

  No further action at the end of editing/chapter.

• When the DB is not accessible due to the error of the archiver

  DB version: 11.2.0.4

  OS: Red Hat Enterprise Linux 6.4

  We manage DBs in a banking environment. At least once a month, in one of our DBs, we have the failure due to

  ORA-00257: archiver error. Connect internal only, until this just released.

  This is sometimes caused by huge batch application without first informing the DBA.

  Once we reached the archiver error, our main goal is to bring the DB back to business as soon as POSSIBLE without affecting the valuation of DB.

  DB failure can be very stressful for the shift, s/n as he or she should join a bridge and explain the technical stuff to managers yelling at you and to solve the problem at the same time.

  Brief history of our backup strategy:

  -----------------------------------------------------

  Most of our DBs critics have full backups (Level0) Sunday and Wednesday night and incremental backups (level 1) the remaining days.

  We've been busy DBs archivelog backups clocked at 11:00, 15:00 and 19:00 without DELETING all THE ENTRIES.

  When we are faced with ORA-00257: archiver error, should we be running

  backup ARCHIVELOG all the remove all entries;

  or

  backup archivelog delete all input; # Not ALL shown in red above after the archivelog keyword

  If I understand correctly,

  backup archivelog all the remove all entries; backup all archivelogs independently to know if an archivelog or archivelogs have been saved in a previous backup task n + removes some archived logs that have been saved.

  backup archivelog delete all input; will be only backs up archivelogs that are not supported by previous backup jobs + removes some archived logs that have been saved.

  If my above assumption is correct, then backup archivelog delete all entries; will be faster because it will not unnecessarily backup archivelogs that already benefit from the top and, therefore, saving time. Am I wrong?

  The BACKUP ARCHIVELOG command requires a specifier archivelog - as for example 'ALL' or "NOT SAVED ON DISK 1 TIMES".

  You cannot issue simply DELETE a BACKUP of ARCHIVELOG...

  Hemant K Collette

• iDVD will not open due to the required debugging atos. Help please I need to produce DVDs with direct access to scenes and have only used iDVD for the years

  I use iDVD to produce videos of my marriage. Latest updates of operating system, the program requires an administrator password to enable atos to continue debugging, and upon entry, iDVD just stops. Is there a way to get around this?

  Hey there WAPhoto,

  I understand that you experience a problem when you try to open iDVD on your computer. I would suggest a troubleshooting step for you that can solve this problem. Please, go to your library folder by using the information in this link:

  In the Finder, click the menu go to the menu bar, and then choose one of the following:

  Library: Hold down the Option key, and then choose library.

  OS X El Capitan: go directly to a specific folder

  https://support.Apple.com/kb/PH22187

  From there, navigate to your Preferences folder. In this folder, find the plist labeled "com.apple.iDVD.plist" and move it to this folder on the desktop.

  Out of this folder and go to the Caches folder. In this folder, find the folder named com.apple.iDVD and move the file named 'Cache.db' in this folder on the desktop as well.

  At this point, you can close the Finder window and relaunch iDVD. If iDVD opens without a problem, you can move the files that you moved to the desktop to the trash and continue to use iDVD as you wish.

  Thank you for coming to Apple Support communities!

• Vista Home Basic Edition will not start due to the update

  Hi im trying to fix a friends laptop for him it has vista home basic and his laptop is a system of e (ei3103) when the laptop to start trys it loads and then it says configuring updates when it gets 51% then does not far the hardrive light is still flashing away and the busy symbol is still running but everything is never more than this evn iv rest the laptop computer on at night thinking that he just need to time and what SHE WAS A BIG DOWN LOAD IM LOST what to do now

  Hi davelyness26,

  Take a look at this thread similar here, especially the post SpiritX MS MVP with some other troubleshooting.

  I hope this helps!

• BlackBerry Z10 Z10 will not accomplish configuration after the update of device software, help please.

  Help please, cannot complete phone ater installation performing a software update by using the link to Blackberry.

  Sequence of events;

  Recognized by link to Blackberry phone.

  Reload the selected device - available 10.0.10.90 updated version software.

  Get - software update seems to load correctly then unplugged Z10.

  Phone restarts, welcome to Blackberry, English (UK) checked, swupe left.

  No available SIM card, slide to WI - Fi.

  Password entered for home network and confirmation screen displays connected.

  Agree screen - countries changed to United Kingdom (English),

  the bottom slot, I agree to the Blackberry ALS...
  "I agree" and "I do not accept" buttons cannot be selected and
  After a short delay could not connect appears.

  By pressing "Settings" goes back to the page of the networks Wi - Fi with
  confirmation that the connection is good and round, there it is again.

  Completing the update software several times as indicated above and also of

  www.BlackBerry.com/updates by forum next display to

  http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-

  to-Reload-your-Blackberry10-OS/td-p/2187545

  and get the same result every time I would appreciate help to solve this problem.

  Result, I thank you, using a WiFi hotspot from another phone installation completed perfectly. Now curiously etc.on Z10 browser works perfectly uning home WiFi. Again, thank you for your advice. Best regards, Bob

• DVD drive - no read or write DVD + R discs, works with CD - R discs

  XPS 410, XP SP3 Media Ctr
  DVD + R/RW C - RW Combo Drive 'HL-DT-ST DVD +-RW GSA-H13N ".
  Drive DVD-ROM "Philips DROM6316 DVD - ROM".

  My DVD player has been working flawlessly for over 2 years and all of a sudden, without apparent reason, is no longer read or burn DVD - video or data discs. After inserting a disk (blank or recorded) I get a message 'no disc' about a minute later.

  This DVD Player PEUT read and write any CD - R disc, without difficulty, the problem occurs only with DVD + R discs.

  My second drive, only a DVD-ROM works fine. And nothing out of the ordinary, as far as I know, on the properties of disk in the control panel.

  Any help would be appreciated.

  Message edited by zonie776 on 01/08/2008 17:32
  
  

• winndow will not start due to hardware changes.

  I recently had a fearsome crush at home. Had to replace the card motherboard and CPU. Now, windows will not boot due to the change of material even after running windows repair. What can I do?

  Once you change a motherboard, you should be able to reinstall Vista.

  Vista would have the old drivers of the motherboard installed.

  See you soon.

  Mick Murphy - Microsoft partner

• CD/DVD will not read however I can burn discs

  OK computer gurus can you help me please understand this... I can burn a cd, however, any cd I put in not read or install new software.  Any help?

  Hi gurucarcar,

  1 when was the last time it was working fine?

  2. you receive an error message?

  Method 1

  Check out the link and run the below the fixit tool available in the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Method 2

  If the previous step fails, then check out the Microsoft article and try the steps mentioned below.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD and DVd won't read and write

  My Cd and Dvd players will not read or write anything...

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
  3. what happens when you try to play a CD or DVD? You receive an error message?

  Step 1: Run the fix it tool in the following article and check.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2: Update driver CD player or DVD and check.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• My CD/DVD drive cannot read or write media.

  I get a message to insert a disc, but it is already in it.   When I reinsert the disc, I get the same message.

  Hello

  Looks like the drive has a problem, possibly a cleaning disc might help if he and the
  below are questionable solutions to what sounds like a hardware problem.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• TSST corp DVD won't read or write

  I have a desktop Dell VISTA computer.  He's got a TSST corp DVD +-RW ts-H653B ATA Device.   When I got the computer from Dell (April 2008), the DVD worked fine.   Now it is not recognized by Device Manager - it is for me a "Code 10" - that it does not start.   I tried everything.  My machine is a Dell VISTA home Premeium

  Any ideas? send me an email to * address email is removed from the privacy *

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• MY DVD WILL NOT PLAY DVD

  WHEN I PUT IN A DVD IT SAY INSERT A READABLE CD

  Hello

  Please do not type in capital letters as it is difficult to read and considered to be shouting.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite Pro L100 - DVD will not turn even upward

  My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.

  When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
  Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?

  I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
  If this is the case why Windows XP does not recognize a DVD - RW?

  If someone sees something I missed please?

  Hey,.

  Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.

  The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.

  Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)