CD/DVGW TSSTcorp TS-L632M ATA Device is not reading DVD

Original title: TSSTcorp TS-L632M ATA Device CD/DVGW

I have a HP laptop and have a problem with the DVD device. It doesn't read the DVD - RW. It shows me that the DVD is empty. I tried with DVD which worked without any week issue two or three, but now they are unable to read. I tried to use a Microsoft Fix it on the site, but it could not solve the problem.

Hello

You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.

Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.

Several good info here:
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

===========================================

This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • CD/DVGW TSSTcorp TS-L632M ATA device does not not (code 10)

    I use Vista on my HP laptop.  Try to read a cd and it does not start.  When we look into it, I discovered the adapters don't is not loading and cd/DVGW says it is working properly.  The drivers are up to date just does not load.  Isn't it so please help!

    First do the following:

    http://support.Microsoft.com/default.aspx/KB/929461

    If no joy then this:http://support.microsoft.com/default.aspx/kb/310123

    I would like to start in SafeMode - Device Manager - remove all instances of the drive and restart. It will be re - install itself. Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

  • Re: Toshiba DVGW/hd ts-l802a ata device issues

    Well, I'm not sure what happened, but between last week and this week, when I insert a CD or DVD in my laptop, it does not read them. In my device manager, there's a little warning! symbol "Toshiba DVGW/hd ts-l802a ata device" under CD-ROM/DVD-ROM drives. It shows this message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    I don't know if I uninstalled something by accident, or if it is another problem entirely. Can someone please tell me what to do? I want to be able to play movies on my computer again!

    Thanks in advance!

    Hello

    What operating system do you use?

    If you are using Vista, please check http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  • error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

    error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

    Hello

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack.

    Normally the above will solve this problem otherwise working your way down through them, even if you did
    them before.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

    MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

    Hello

    You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
    Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Several good info here:
    http://Club.myce.com/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    ----------------------------------------------------------------------

    Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
    solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
    that the troubleshooter does not, and those who "could" be the cause.

    Check with your system manufacturer Maker and device for possible firmware updates and the good
    Your player registry entries.

    Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
    other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
    a person with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Optiarc DVD RW AD - 7560A ATA DEVICE do not work

    My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
    1 device state poster (this device cannot start. (code 10)).
    2 update driver... shows that the best device driver software is already installed.
    3. it is the driver of manufacturing.
    4 driver provider Microsoft Driver version - 6.0.601. 18000, manufacturer-(Standard CD-ROM drives)

    Hope that enough information... Oh, my computer is computer laptop Windows Vista Service Pack 1, Sony VAIO - VGN-NR22OE.

    Grateful for any advice...

    Hi Nikki 801,

    Can you please try these steps?  Be very careful when you edit the registry.  If you would please do not delete anything immediately.  If you must please the following steps... If upper and lower filters is not in this registry key, simply leave the registry.

    To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

    1. Click Start

      Collapse this includes this image

      type regedit in the Search box, and then click regedit in the programs list.

      Collapse this includes this image

      If you are prompted for an administrator password or a confirmation, type your password, or click continue.

    2. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

      Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

    3. In the pane, click UpperFilters, and then click Remove.
    4. Click Yes to confirm the deletion of the UpperFilters registry entry.
    5. In the pane, click LowerFilters, and then click Remove.
    6. Click Yes to confirm the deletion of the LowerFilters registry entry.
    7. Exit the registry editor and restart the computer.

    If you please you would follow with me as best as possible, I'd be very happy.

    Thank you

    Aaron Griffin
    Support engineer
    Microsoft technical support

  • PHILIPS DVDR1660P1 ATA Device can't read the CD.

    Try to read a CD but does not start. A running Fix It Center & result was - no problem with the drive.
    Any suggestions?

    Original title: CD/Dvd Player not working not not but ran difficulty It Center and no problem found with PHILIPS DVDR1660P1 ATA Device)

    Hello

    (1) who solve this are you referring to?

    (2) you get any error message?

    (3) have there been recent changes to the computer before the show?

    I suggest you try the steps mentioned below and check if it helps.

    Method 1: Try to run fix it from the link below.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

    Hope this information is useful.

  • Optiarc cd - rw crx880a ata device will not recognize any cd

    I have an acer laptop. It is an Optiarc cd - rw crx880a ata device. It will not recognize any cd / dvd... He appears with insert the cd. I open and close the cd drawer and always the same pop-up.

    My operating system is windows vista.

    Then you know that the drive is bad. You will need to buy a compatible optical drive, Acer or an after-market reputable dealer. Since it is a laptop, you can buy the disc just for her. Yes, it's probably easy to replace. Refer to the manual of your computer or search for a manual on the Acer tech support site. MS - MVP - Elephant Boy computers - don't panic!

  • Driver TSST Corp CDDVDW TS - L633L ATA Device will not load. The problem code is 19 / how to fix?

    HP Pavilion dv4
    TSST Corp CDDVDW TS-L633L ATA Device

    Control Panel / problem report and solutions
    Problem: Could not load software driver status: sent report

    Description
    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 64
    Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
    Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
    The PnP problem code: 00000013
    Driver name: cdrom.sys
    Driver version: 6.0.6002.18005
    Driver date: 11/04/2009
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    Additional information about the problem
    Bucket ID: 619663520

    Control Panel / Device Manager
    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I tried:
    Update driver software
    Uninstall / find the hardware changes
    Uninstall / reboot / new hardware found
    Properties / verification solutions

    How can I fix it?

    Hello

    Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

    http://support.Microsoft.com/kb/982116

    You have to restart the laptop after that.

    Kind regards

    DP - K

  • TSSTcorp TS - H6538 ATA Device / blank DVD + RW media-player rejects disc - what am I am I missing here?

    I am a complete newbie so much in this regard. I finally learn / remember that Virgin Media must be formatted first. It is done once in the "default" format - did not work. Restarted A to 2.5 any thing-or-other-do not work either.

    (BTW I use the Roxio Creator Basic, which is preinstalled software and new Maxell DVD + RW discs if it matters.)

    My needs are quite simple-make a music CD copy, maybe do a DVD copy, backup important files, etc. Nothing of what would be considered as heavy or "power - user" or whatever it is. Sheesh.

    And if I can unload for a minute, it seems strange to me that something as simple as what blank media works with your drive or must be more frank/accessible. Then I wouldn't have to worry about the friendly people with a question that "Well, DUH!" wrote you everywhere. Sorry, but I am perplexed - and I've been to all the obvious web site already. My eyes are starting to cross, and my head hurts.

    Thanks in advance!


  • TSST DVD +-RW TS H653B ATA Device does not work

    I get the following error message

    Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I tried to reinstall the driver for the TSST DVD +-RW TS H653B with no luck.  I've also removed the device and close for the computer to recognize the device and he did, but impossible to install the driver.  I downloaded the lateest for the device driver with no luck either.  I also did a full stop, with drain power and pulled the plugs of the device and put them back in and have pulled up, still with no luck.  IM of ammunition at this stage.

    Hi Jmanjordan,

    You can try this step but, if that doesn't work then you may need to contact the manufacturer of the drive for further assistance. Open the link below and click the Fixit .

    http://support.Microsoft.com/kb/929461

    Bindu S -Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • can't get the drivers for the cd/dvr device does not read or write

    original title: can not get the drivers for the cd/dvr device read do not or writeing

    How do car keys DVD for read or write on vista premium.  the drive has failed. ?

    Try to run planned it from this link:
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/mats/cd_dvd_drive_problems

  • TOSHIBA DVGW/HD TS-L802A-ATA do not work after the update to Vista SP2

    Hello

    My devices Toshiba P200 DVD/CDROM has stopped working (code 39) since I've updated with Vista SP2.

    TOSHIBA DVGW/HD TS-L802A-ATA
    RSFOBUJ XEBG5QVCPQ7C SCSI

    I run Microsoft Fix It (http://support.microsoft.com/gp/mats/?ln=en) + "your CD or DVD drive cannot read or write media.
    But it has not solved the problem.

    I download and run the Microsoft devcon command-line utility.

    > devcon stack gencdrom

    IDE\CDROMTOSHIBA_DVDW/HD_TS-L802A___TO35___\5&31E4E654&0&0.0.0
    Name: TOSHIBA DVGW/HD TS-L802A ATA Device
    Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
    Controlling service:
    CDROM
    Lower filters:
    tdcmdpst
    5 SCSI\CDROM&VEN_RSFOBUJ&PROD_XEBG5QVCPQ7C&REV_1.03\ & 36E5972 & 0 & 000000
    Name: RSFOBUJ XEBG5QVCPQ7C SCSI CdRom Device
    Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
    Controlling service:
    CDROM
    Lower filters:
    tdcmdpst

    I guess that this lower filter of "tdcmdpst" (the writing of TOSHIBA motor filter driver) is the issue.
    But I can't remove the filter 'tdcmdpst' even with admin rights.

    > devcon classfilter lower tdcmdpst

    DevCon has failed.

    How can I remove this filter to upgrade Vista SP2?

    Kind regards

    Nicolas

    Can roll you back OS to an earlier time before installation of SP2?
    Drive works properly again?

  • Satellite A300 - search driver for Pioneer DVD - RW DVRKD08A ATA Device

    Hello

    I have a Satellite A300.
    My problem is that the driver for the Pioneer DVD - RW DVRKD08A ATA Device does not work. I have research the Toshiba site for a new driver, but I can't find.

    Can someone help me?

    I put t understand why you need this driver?
    What do you mean by player don t work?

    The Windows operating system contains such driver! It s an own drivers from Microsoft and the ODD should be recognized automatically.
    In your case, you should first check if the CD/DVD drive is recognized in the BIOS.
    If it s not the case then your new ODD is not compatible or there is a hardware failure.

    If the BIOS recognizes the drive CD/DVD correctly, but if the ODD is not correctly in the Windows Device Manager (yellow exclamation point) then this could be the problem of registry.
    In this case, you should remove the reader of CD/DVD from the list of devices and must restart the new laptop

  • device driver was not installed optiarc DVD RW AD 7581 ATA device

    Graduated fron windows vista home premiun, Ultimate and optiarc dvd rw ad-7581 ata device will not work. How can I fix it?

    Hello

    Check with the Maker system and/or the manufacturer support and Forums real player
    (if any). There is no reason for the reader who has worked on Vista HP does not play
    on Vista Ultimate.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Maybe you are looking for

  • Toolbars disappear when you access a site by a link

    In some cases specific, when I visit a page by clicking a link on another page or in an e-mail, all my toolbars and menus disappear on the page visited in the newly opened window. I have attached a screenshot. Normally, my pages include the menu, mod

  • New battery does not work on Satellite C855-29N

    I bought a battery. I put it in to the laptop and the battery light flashes just orange.I tried to delete the adapter sector and battery and immobilizes the butter of power for 30-40 seconds before you put the new battery back in once, connect the ca

  • Can I split a file into two files wma?

    On Windows XP using Windows Media Player 11.  Is it possible to split my file wma into two smaller files?  Thank you.

  • Windows 2012 on PowerEdge T710

    Windows 2012 will be installed on a PowerEdge T710?  Is there a version of systems management tools and Documentation that will have drivers for a PERC 6 / i and Windows 2012?

  • crashes and close

    FK790AA HP PAVILION ELITE MODALE 9400f Yes for vista 64-bit window (disk space), accidents and shut down and restart the car No upgrade has been done for her