CD-ROM does not open

I have a cd-rom that does not open. It is downloaded in pdf format. also can not get attachments to open.

Please try to explain your problem (s) again.

"A cd-rom that does not open" has little meaning.  Do you mean that your CD drive tray will not open?

"It uploaded in pdf format."  What downloaded in pdf format?  The antecedent 'it' in this sentence refers to "a file of the cd-rom" do you mean that you have a cd-rom that contains a PDF on this subject?  What happens when you put the CD in the drive?

You 'open' pdf files using Adobe Reader or Foxit Reader, which are free (but must be installed on your computer).  Are one of these programs installed on your computer?

If you choose to download and install Adobe Reader, do yourself a favor and don't include NOT of McAfee Security Scan Plus.

Regarding email attachments:

  • What documents you are having problems with
  • What error messages you get (Please provide the full message, not paraphrase)
  • application of e-mail, you are using

Tags: Windows

Similar Questions

  • The CD/DVD-rom does not open. I rebooted several times and nothing. I push the button and it makes the sound like it wants to open, but won't.

    No error message

    Hello

    There is a small hole on the drive where you can put a paperclip to get the door open.

    Create a trombone in car Opener
    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm
    Open a Driveon stuck your PC - video
    http://video.about.com/pcsupport/open-a-stuck-drive-on-your-PC.htm

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • CD-ROM drive does not open

    Separated from this thread.

    How can I open a disc in my drive, but does not open on my screen?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://Club.myce.com/F61/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Satellite A200 - 23P - mechanic of DVD - rom does not

    I'm sorry for my English in advance this topic! -Thank you

    I have a very big problem with my engraver of DVD (RM).
    I bought SAT A200 - 23P three weeks ago.
    The Win VISTA operating system has been installed. DVD - rom worked well.

    If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.

    Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
    It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.

    However, if I have installed XP on the second partition, Win Vista does not load :(
    I don't have a second chance for second selection (Vista and XP).
    I now have XP only, even if Vista is on the first partition - I didn't delete it.

    Do you think that the DVD-rom is HW or SW problem?
    I think that, given that the DVD-rom does not in the BIOS - HW error.

    But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)

    If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).

    PLS help me someone-

    Thank you!

    Hi Michal

    Your question is very strange, I mean the number of CD/DVD drive

    The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.

    So I wonder why the eject button works with Vista and not XP preinstalled OS?  :|

    My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too

    As you see it s not easy to say what's wrong exactly, we can only speculate.

    Now some details about your installation of OS double.

    You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
    This happened to me also. I installed Win XP on my Satellite and could not start Vista.

    The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.

    Then I downloaded the tool called Easy BCD.
    This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.

    That s it!

  • CD ROM will not open

    I have a 64-bit system, but my CD ROM is a 32-bit, so does not open? What can l

    64-bit and 32-bit are the types of operating system, based on the capabilities of the processor. Programs that are designed for a 32-bit version of Windows will also usually work on a 64-bit version, but not the reverse. A 32-bit (x 86) processor cannot run a 64-bit version of Windows. The physical CD ROM drive is agnostic to the 32/64-bit system architecture. The file system on a CD-ROM is also not dependent on 32/64 bit.

    I have moved your question to the forum of feedback responses on Windows Hardware forum, but maybe it's not in the right place.

    How to ask a question in the forums:

    http://support.Microsoft.com/kb/555375

    -steve

  • My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

    Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

    Hi John,.

    Please let me know exactly what happened when you tried my suggestions of first and second.

    Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

    When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

    With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

    Tricky

  • Pavilion p6744y: HP Pavilion p6744y DVD-ROM does not not after installing Windows 10.

    I have recently installed Windows 10 on my Pavilion p6744y. Since installation, the DVD-ROM does not work correctly. This worked perfectly before the upgrade of the OS and is the original drive installed by the manufacturer.

    Spin discs and the light flashes, but there is no response from the computer. DVD - ROM does not appear in Device Manager and has been confirmed as "ENABLED" in the BIOS Setup screen. All wires and cables are attached and tight.

    The HP Support Assistant is installed and confirms that all the drivers and software are up-to-date, like Windows Update.

    Microsoft contacted for support and remote access to the PC. They have attempted to install an updated driver, but have been unable to find newer and easier to apply than the drivers already installed drivers. They were unable to solve the problem and advised me to contact HP. Contact HP is not useful because the PC is out of warranty and they expect me to pay for the support.

    Help, please. I suspect all that I need is a updated driver to make the DVD - ROM communicable with 10 visible Windows.

    I know a little about this stuff, but I'm certainly not a computer "guru". Please keep the simple resposnes with easy to understand by a layman terms.

    Thanks for your help!

    I FOUND A SOLUTION!

    Research in the blogs of support paid off in a big way. A minor registry editing is all it took, and my player works like new!

    Here is the solution. My system is Windows 64-bit 10.

    Resolution 5: Create a registry subkey
    Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go tohttp://support.microsoft.com/gp/admin
    Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
    To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
    Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to new, and then click key.
    Type Controller0 and press ENTER.
    Right-click Controller0, point to new, and then click DWORD(32-bit) value.
    Type EnumDevice1 and press ENTER.
    Right-click EnumDevice1, click on change...
    Type 1 in the value data box, and then click OK.
    Exit Registry Editor.

  • CD drive does not open on the hard drive of the computer.

    Original title: on my hard drive DimensionE521 the CD-Rom drive does not open.  He starts to and then stops. The computer says it's OK? Help?

    I had this problem and another time after playing with him for days, all of a sudden it just opened.  There is nothing in the drive - I'm sure of.  Everyone has to experience this problem.

    Hello Nannytosix,

    If you look very close to the door of the CD player, you will probably see a small hole somewhere around him.

    What you need to do is unfold a paper clip and push it in the hole and it should open the CD drive manually.

    I encourage you to consult the manual to check this.

    Best regards

    Matthew_Ha

  • Vista does not open a cd/dvd using MATSHITA DVD-RAM UJ-850 s ATA Device

    my laptop has a MATSHITA DVD-RAM UJ-850 s ATA Device. but it does not open a cd/dvd. Why?

    Hello

    1 recently, you did changes to the computer?

    Method 1. Uninstall and reinstall the cd - dvd drive.

    If the drive is not listed, remove and reinstall the existing drivers.
    To do this, follow these steps:
    a. Click Start and then click Control Panel.
    b. click System and Maintenance, click System and then click on Device Manager.
    Note that if control panel is in Classic view, double-click System and then click on Device Manager.
    c. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
    e. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.
    After the computer restarts, the drivers will be installed automatically.

    Method 2. The firmware was updated.
    I would also recommend updating the firmware of the CD - DVD drive.
    You may need to contact the manufacturer for it.

    I hope this helps.

  • CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

    I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

    http://support.Microsoft.com/kb/982116/en-AU

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    See if the information above solves the problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • My Cd drive does not open

    Original title: BD - rom drive

    My Cd drive does not open. I even sent it back to the factory to get the engine replaced and it used to always open. And if it opens, it read any disk. What should I do? Can I open the player through my laptop instead of hitting the button on the outside?

    Hello Jayde,

    You can look for a tiny hole on the draw draw in which insert a paper clip to manually eject the CD player draw. Follow these steps and check if that helps.

    Step 1: Open Windows Explorer, right-click on the drive icon and choose the option to eject it. If it is ejected from your CD-ROM drive tray, button on the hard drive is faulty and it is recommended to replace the disk.

    Step 2: Also boot in the BIOS and check if you can eject the CD by pressing eject CD player if the problem persists then drive is defective.

    Warning of the BIOS:

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Step 3: I suggest to start in safe mode and check if you are facing a similar question:

    Start settings for Windows (including safe mode)

    http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

    Let us know the status of the issue after following the steps above. So that we can help you further.

  • Apps does not open in the creative clouds

    Creative cloud apps does not open, I downloaded everything but still nothing will launch. I use a Mac and nothing appears in my application no more... Help, please!

    Hi K.Byrd,

    What is the Mac version you are using. If you use 10.7 or higher then please go to Applications/Utilities/Adobe Installers and uninstall CC applications. Run the CC cleaning tool to remove the remains of ruminants: http://www.adobe.com/support/contact/cscleanertool.html .

    Enable the root account and try to reinstall: http://support.apple.com/kb/PH11331.

    Kind regards

    Romit Sinha

  • Final Cut Pro 10.2.3 does not open a library more!

    Hey! I could really use to understand this, a total mystery for help:

    This morning, I tried to open a library of Final Cut is saved on my hard drive. Last night, I worked with the library, but now it just opens up.

    It gives an error: Final Cut close unexpectedly

    It's just one that does not open it opens other libraries.

    Also, I tried to open it on another computer, but here it opens either.

    I tried Trashing FCP to the preferences Manager, made a first aid attendant, but it seems that the problem is in THE LIBRARY not in the program.

    In addition, NONE of the backups open.

    Any ideas? ;)

    Thank you!!

    Try to open the library of most recent backup.

    By default, they are stored in Final Cut backups in the folder sequences.

    Russ

  • IPhone does not open messages, phone or contacts

    Does not open my iPhone 6 contacts, messages or phone, the phone crashes and returns to the home screen.

    Tincho94 wrote:

    Does not open my iPhone 6 contacts, messages or phone, the phone crashes and returns to the home screen.

    Press and hold home/sleep set button until you see the apple logo and then release, then wait for the boot device upward.

  • Preview does not open

    Preview does not open suddenly.

    May be a corrupt .plist.

    Make a backup, preferably 2 backups on 2 separate drives.

    Quit the application.

    Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to preferences.

    com.apple.Preview.LSSharedFileList.plist. bring the .plist on your desktop.

    Restart your computer, open the application and test. If it works fine, delete the plist for the office.

    If the application is the same, return the .plist where you got it, crushing the latest.

    Thanks to leonie for certain information contained in this.

    If this does not work, perform a backup.

    Leave the preview.

    Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder. Delete the following text. You won't find all. Restart and test.

    Containers/com.apple.Preview

    Containers/com. Apple.QuickLook.UI.Helper

    Preferences/com.apple.Preview.LSSharedFileList.plist

    Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist

    State/com.apple.Preview.savedState request registered

    Linc Davis credit for this solution.

    Overview of reset of the automatic download solution - part 3

Maybe you are looking for