CD ROM does not recognize any CD, all get ejected in Vista

Similar Questions

• Satellite M40X-116 - drive does not recognize any CD or DVD

  Hi all!

  I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
  Please I need your help as soon as POSSIBLE.
  If you know what could be the problem, please, just send an e-mail to [email protected]
  Thank you all for the cooperation
  Best regards
  Marian - Romania

  Hello

  to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

  Good bye

• Lightroom does not recognize any of my file types [DNG / JPEG etc] and is unable to import? any ideas for a fix?

  Lightroom does not recognize any of my file types [DNG / JPEG etc] and is unable to import? any ideas for a fix?

  It's impossible. LR is a non-destructive editor and photo management. For her to not see images of the files would make it one of the worst of these programs tyupes.

  So there is a parameter that you have screwed up in the import dialog window that prevents your DNG, TIFF, JPG, PSD, PNG, CMYK and film formats appear in the import window.

  So show us a screenshot of your import window.

  More than likely you have chosen a destination that has all the permissions read/write to your username.

• Laptop Inspiron E1405 media Cntr, CD/DVD-ROM does not recognize DVD

  My CD/DVD-ROM does not recognize when there is a DVD in the drive. I had this problem before, but persistence always overcame the problem, that is, I still put the DVD in over and over again, and then it worked. A week ago, I was able to watch all of a DVD movie, reinserting after about 10 times. But now, it does not recognize a DVD. I tried to roll back the Media Player from v.11 to v.9, but it made no difference. I would appreciate help, like Dell and the India seems unable to help.

  
  

• DVD Rom does not recognize DVD

  CD/DVD-Rom is not recognize my DVD

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 does not recognize any keyboard, except the v1.0 of MS natural ergonomic Keyboard 4000 defective

  I have a very strange problem.

  I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.

  So, I bought a new generic keyboard.

  The problem

  1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.

  2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.

  However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.

  It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.

  I tried many things

  1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.

  2. I tried using different USB ports on the desktop. He has not made a difference.

  3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).

  4. I tried to start Windows in safe mode. That did not help at all.

  Any help would be greatly appreciated.

  Hello Pauliw,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.

  You can try the steps in the following Microsoft article and see if it works for you.

  Troubleshoot keyboard

  Note: There is place for Windows 7 also.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.

  1. Click Start

  2. In the Search box, type command prompt .

  3. In the list right click on command prompt and select run as administrator.

  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1

  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.

  6. When the Device Manager opens, click on view

  7. Now, click Show hidden devices.

  8. Remove all the entries that exist for the keyboard and the USB category.

  9. Close Device Manager , and then restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• iTunes does not recognize any of my iPhones (Windows 10)

  I've recently updated iTunes 12.4 and now my iPhone 5s, and my iPhone 4 are not recognized by iTunes. They appear as 'Apple iPhone' in my file Explorer, but are not accessible via iTunes or iFunBox. I tried all the options in the management of the link here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  I removed the lockdown folder.

  I tried several cables.

  When I go into Device Manager, there is no "Apple Mobile Device USB Driver" under "In Bus USB controllers", but there is 'Apple iPhone' under 'portable '. If you're looking for an update to this pilot says 'Windows has determined the driver software for your device is up-to-date' "MTP USB device".

  More interesting still, I went down to iTunes 12.1.3, thinking that would take me back to a working version, but in fact it STILL does not recognize my phone(s)!

  What the hell is happening?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• HP Envy 15 - q47002 i7: laptop overheating, does not recognize any USB. Even in the Bios.

  Hello

  I bought this product last year, so my warranty wore off.

  My laptop is overheating and it is very slow at this point (even videos are not working well). I tried to clean it up but it was without result.  I want the game and computationally intensive applications, but I'm afraid of the motherboard or hard drive failure.

  Now to the point. I can't install the new OS, any OS because this laptop doesn't have a DVD player and it doesn't recognize any usb 2.0 or 3.0.  I tried to change the options in the Bios and I tried to uninstall and install the drivers (they are up to date).

  What should I do? I can't install a new system because of this problem, and I can't use anything more demanding than youtube which is really annoying since this laptop has good specifications.

  I am currently running Windows 8.1 which I got when I made a purchase.

  I hope someone answers!

  Thank you.

  EDIT: In the Device Manager it says device not installed with yellow exclamation point. By Usb or ext hdd. And it will not find the device-specific drivers. As I never need them on another PC or laptop.

  Hi @HarunC,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP ENVY 15 t-4710HQ i7 Quad Core Notebook and questions with serveral fuctions works do not. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  With the USB not recognized by Windows.  Here is a link to solve the USB connections.

  I would like to uninstall everything cited first in the list of universal serial bus controllers.

  Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

  Restart your computer, and then insert the USB device.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link if you need to download drivers USB Intel for Windows. This is a utility to update.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Windows Media Player does not recognize ANY portable device

  Windows Media 12 does not recognize my mp3 player or ANY other portable device... I tried to restart my computer, I tried to clear the cache of the library..., but Windows Media player refuses to acknowledge portable devices...

  go to control panel > administrative tools > Services > Portable Device Enumerator Service

  Click on it and press the Start button and in the startup type: select "auto".
  Your problem should be solved

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• Dynadock - USB Port Replicator does not recognize any USB keyboard

  Hi can any body help?

  I have a Satalite pro L300-154 with a Dynadock - Replicator to USB Port, but it will not recognize any usb keyboard.

  Have you checked if the laptop would recognize the external USB keyboard connected directly to the computer laptop s USB port?

  Please check this!

• BD B DH8E2L CD/DVD-ROM does not recognize the drive

  Pavillion H8 - 1117C with a burner BD B DH8E2L.  Using the CD plays his trak - 5 minutes later returned to the for use and it will not beat, not recognize CDs or DVDs.  I uninstalled / reinstalled the device and the software - nothing.  I can hear a little grunting noise, but does not turn upward at the time what it is.  I used a cleaning disc - still nothing.  Any idea?  And, if so, the best place to buy a new one.

  Bobby5

  At all times, Bob:

  Here is the link to the list of the parts for your model.

  http://PartSurfer.HP.com/search.aspx?SearchText=QU043AA

  The blue ray player has part number

  504941 200

  You can search by part number, I guess HP store parts shows, it is no longer available at HP.

  The problem is that none of us are 100% positive, the drive is bad.

  I could take a look at the front of the car and see if there is no generic who would take too long the buttons to open to try it are similar in size and location, this should work.

• Vista does not recognize any disk in the disk drive

  Vista crashed when I was loading photos on a cd.  Since then every disc I put in - music, software, data are not recognized, it turns but no program starts automatically.  If I go in via Explore and click the drive the disc turns, then I get the message "Please put in a disc.  Any help gratefully received

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Why google does not recognize any of the keywords that I put in my page properties?

  In my site built in Muse, I put all the relevant keywords in properties on each page and when I checked the keywords in Google Webmaster tools none of them words are supported. What I am doing wrong?

  Hello

  Some keywords are very competitive. Make sure you check the competition for the search term that you want to classify. In addition, you must check the sites Web which are located upstairs for that keyword. Analyze, observe their optimization tips and try to use these techniques in your optimization process.

  Also, do not rely on keywords or not to optimize your website for keywords, optimizing for users and it will automatically be a higher rank in the search engine results Page (SERP). Also take a look at the official Google blog, which says, is no longer the key words are

  Official Google Webmaster Central blog: Google does not use the keywords meta tag in web ranking

  Please let me know if you have any other question.

• DVD Sony player appears installed but does not recognize any CD or DVD

  I just bought a Sony Optiarc AD7260 DVD RW drive and installed in my system. I am running Win XP Pro sp3. My Bios says the drive is recognized by the latter and in the Device Manager in Windows, the drive shows up and says that "this device works properly." However, any disk I put in the drive (self burned cd / self burned dvd / retail music cd / dvd retail game / virgins DVD) never presents itself as being accessible. When the drawer goes in, I get the icon of the cd spinning for about 15-30 seconds, but then it goes back to the usual pointer. If I try to access the drive in Windows Explorer or any other program, it does not appear. I tried to use ImgBurn to get media info I had placed in the drive (blanks & with data) but it still says "incompatible medium installed" in the drive. The Optiarc is my 4th Sata device, 3 others are hard drives. The system is a dc7100 HP Compaq with 3 GB of ram. Any suggestions?

  Hello.

  Do you have the old disk, or access to another drive, try in the computer?  If these work then you will have a faulty drive.  It is possible to have a defective out of the box.  Also try a different SATA cable.  These can sometimes be problematic.