CD-ROM does not work not wanting too much to read my collection of fief of disk for nothing appears

I have now set and this thing kept poping up of media in the CD/DVD drive is not readable (HL-DT-ST CD-ROM GCR - 8481B)

and I don't know how too get it trouble will someone help me?

Hello

I suggest you try to execute this fixit and see if it helps:

http://support.Microsoft.com/mats/cd_dvd_drive_problems

It will be useful.

Tags: Windows

Similar Questions

  • My CD-ROM/DVD-ROM does not work

    My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
    1 device state poster (this device cannot start. (code 10)).
    2 update driver... shows that the best device driver software is already installed.
    3. it is the driver of manufacturing.
    4. I tried the microsoft fix it downloads and it has not solved the problem.

    Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

    Grateful for any advice...

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I want to cancel everything useful and does not want me working

    I want to cancel everything useful and does not want me working

    Hello

    You want to cancel your Adobe licenses or identification code Adobe completely?

    Kind regards

    Sheena

  • Satellite 2410-303 CD ROM does not

    Help, please.

    Have this old laptop with XP and the official restoration of cds.
    Need to format, but the cd rom does not work.

    Obtained in the Bios and there is no option to boot from USB (flash or external CD-ROM)
    How can I initialize and format choices Bios gives me are HDD, floppy, CDROM (notworking), LAN.

    Please help me.

    Thank you
    John

    Hello

    The start of the external USB CD/DVD drive is not possible because the BIOS does not support this. The BIOS supports booting from USB FDD (diskette).

    If you want to install Windows XP on this unit without the use of the CD/DVD drive, then you should copy the i386 to the HARD disk folder (folder i386 disk Win P is).
    Then you could start by using a boot disk and run the winnt.exe which is placed in the i386 folder.
    This would start the Windows XP installation and installation of the OS.

  • Satellite A200 - 23P - mechanic of DVD - rom does not

    I'm sorry for my English in advance this topic! -Thank you

    I have a very big problem with my engraver of DVD (RM).
    I bought SAT A200 - 23P three weeks ago.
    The Win VISTA operating system has been installed. DVD - rom worked well.

    If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.

    Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
    It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.

    However, if I have installed XP on the second partition, Win Vista does not load :(
    I don't have a second chance for second selection (Vista and XP).
    I now have XP only, even if Vista is on the first partition - I didn't delete it.

    Do you think that the DVD-rom is HW or SW problem?
    I think that, given that the DVD-rom does not in the BIOS - HW error.

    But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)

    If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).

    PLS help me someone-

    Thank you!

    Hi Michal

    Your question is very strange, I mean the number of CD/DVD drive

    The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.

    So I wonder why the eject button works with Vista and not XP preinstalled OS?  :|

    My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too

    As you see it s not easy to say what's wrong exactly, we can only speculate.

    Now some details about your installation of OS double.

    You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
    This happened to me also. I installed Win XP on my Satellite and could not start Vista.

    The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.

    Then I downloaded the tool called Easy BCD.
    This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.

    That s it!

  • Qosmio G20-108: RAID-> new HARD drive replacement - he does not want to mirror

    I have a laptop G20-108. The raid was quite happilly mirroring then Hdd2 failed. I removed the disk dirve and replaced by a new one [seagate 100 GB sata 150], but he does not want to mirror?

    The stuff of aide said she should recognize a new hard drive with a context menu? I do not have it, but when you click on the console's hard drive icons both say that they are what they should be, but they are both "affected"? Nine should be disconnected not online? should we not say reconstruction?
    I tried pressing the raid button turn off but it wouldn't let me!

    Help how to leave the raid console know it is a new drive and should rebuild Hdd1?

    Hello
    For the use of toshiba (stripping or Mirroring) RAID, you must have two identical drives. Your G20-108 model comes with 120 GB (60 + 60), two hard drives. If you bought a 100 GB hard drive, certainly it will not work.

    Try this, and you will have no problems:
    Make sure that the disks are identical; You can use two different brands, if they are the same size and speed, but it's a BAD IDEA, just get two new hard drives, same brand and size and you make life simple.

    Francisco

  • CD rom does not appear in the start menu in lenovo G500 windows 8

    Hello
    I want to format my lenovo G500 windows 8 and install windows 7 but I can't because the CD rom does not appear in the start menu

    Hi obaid, welcome to the forums.

    you will need to change some parameters in the BIOS, these changes are explained below related to the thread.

    http://forums.Lenovo.com/T5/Lenovo-3000-and-essential/downgrading-from-Windows-8-to-Windows-7-on-Len...

  • Pavilion p6744y: HP Pavilion p6744y DVD-ROM does not not after installing Windows 10.

    I have recently installed Windows 10 on my Pavilion p6744y. Since installation, the DVD-ROM does not work correctly. This worked perfectly before the upgrade of the OS and is the original drive installed by the manufacturer.

    Spin discs and the light flashes, but there is no response from the computer. DVD - ROM does not appear in Device Manager and has been confirmed as "ENABLED" in the BIOS Setup screen. All wires and cables are attached and tight.

    The HP Support Assistant is installed and confirms that all the drivers and software are up-to-date, like Windows Update.

    Microsoft contacted for support and remote access to the PC. They have attempted to install an updated driver, but have been unable to find newer and easier to apply than the drivers already installed drivers. They were unable to solve the problem and advised me to contact HP. Contact HP is not useful because the PC is out of warranty and they expect me to pay for the support.

    Help, please. I suspect all that I need is a updated driver to make the DVD - ROM communicable with 10 visible Windows.

    I know a little about this stuff, but I'm certainly not a computer "guru". Please keep the simple resposnes with easy to understand by a layman terms.

    Thanks for your help!

    I FOUND A SOLUTION!

    Research in the blogs of support paid off in a big way. A minor registry editing is all it took, and my player works like new!

    Here is the solution. My system is Windows 64-bit 10.

    Resolution 5: Create a registry subkey
    Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go tohttp://support.microsoft.com/gp/admin
    Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
    To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
    Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to new, and then click key.
    Type Controller0 and press ENTER.
    Right-click Controller0, point to new, and then click DWORD(32-bit) value.
    Type EnumDevice1 and press ENTER.
    Right-click EnumDevice1, click on change...
    Type 1 in the value data box, and then click OK.
    Exit Registry Editor.

  • My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers.

    My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time.  Every now and then it will be visible and I can use it but 90% of the time it does not exist.  I tried the regedit fix, nothing.  I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM.  I removed, cleaned and reinserted my DVD/ROM drive, but no difference.  I tried everything, except the upgrade to Windows 7... who will be my last resort.

    Hello gargoyle28m,

    If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • CD-ROM/DVD-ROM does not error, is not read/write

    CD-ROM/DVD-ROM does not work. When I insert a disc, that nothing is happening, not auto start and without errors. When I double click on the drive via my computer dvd it says no disc inserted, tried the fix, found whatever it is, said peripheral works properly, the drivers were updated.

    Try to replace the optical drive itself.  They do not last forever.

  • DVD ROM does not

    Hello! my cd/dvd-rom does not work, it does not play any disc. When I load a disc says please insert disk, what can I do

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

    After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

    Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

  • Laptop Inspiron E1405 media Cntr, CD/DVD-ROM does not recognize DVD

    My CD/DVD-ROM does not recognize when there is a DVD in the drive. I had this problem before, but persistence always overcame the problem, that is, I still put the DVD in over and over again, and then it worked. A week ago, I was able to watch all of a DVD movie, reinserting after about 10 times. But now, it does not recognize a DVD. I tried to roll back the Media Player from v.11 to v.9, but it made no difference. I would appreciate help, like Dell and the India seems unable to help.


  • Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

    I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

    Any help would be appreciated!

    Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

    http://www.pendrivelinux.com

    If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

    MS - MVP - Elephant Boy computers - don't panic!

  • CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

    I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

    http://support.Microsoft.com/kb/982116/en-AU

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    See if the information above solves the problem.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for