CD-ROM drive does not open by cmd, trombone, "right click" eject and eject button

as the title suggests, I have tried everything and can't get my HDD to open. all ideas are useful.

Hello

Sounds like it could be a stuck in drive, there are problems of power or lead, or
It just can be used.

If they don't help then check with the system manufacturer and/or drive
Manufacturer support, their documentation online and drivers and ask in their forums
(as appropriate) about the known issues.

The drive is just stuck?

For the readers of the status bar:

Sometimes they get stuck. There is a small hole in the front of the CD drive which
You can stick a paper clip in which will free the reader and allow it to open.

Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

Open a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip

=================================

For the readers of the slot:

Check with the manufacturer of system on how do to eject the disc.

Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

Be careful as you may damage the player using the method below:

You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

The method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrk

How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

Also have heard double tape on a credit card or play can work.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • CD-ROM drive does not open

    Separated from this thread.

    How can I open a disc in my drive, but does not open on my screen?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://Club.myce.com/F61/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • DVD Rom drive does not open when I try to eject a disc

    Original title: dvd rom

    HI.i can open rom.i push to eject dvd but dvd rom not the open.can help me.

    Hello

    1 is this blink when you press the button to eject the CD/DVD drive?

    2. is there the CD/DVD in the CD/DVD drive?

    3 did you changes to the computer before the show?

    4. don't be the CD/DVD drive not detected in the Explorer(My computer) Windows?

    If the led does not illuminate, the reader is disconnected or broken. In this case, you may need to contact the manufacturer of the mounting of the CD/DVD drive system.

    If the led does not blink, you can try the following:

    (a) open my computer

    (b) right click on the CD/DVD drive

    (c) click on Eject and check if the CD/DVD drive eject

  • My dvd/cd rom drive does not open

    I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off.

    Hello

    Try using a tip of a paper clip to open the tray.

    "How to create a trombone in car opener.

    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    "CD-ROM, DVD or other drawer not open."

    http://www.computerhope.com/issues/ch000214.htm

    See you soon.

  • Tempting desperately to open the Dimension E521 CD-Rom drive does not open. Anyone know the solution?

    I tried all the solutions given by the computer itself nothing doesn't.  It seems that it will open up and then stops.  I have the green light as I usually do, but it flashes not stable.  I really need to use this player.  There is nothing in the drive to get stuck.  Is that someone out there has had this problem and how they solve this problem?

    First of all, try to open Windows Explorer, click right on the optical drive icon and select eject.

    Another option is to hold the eject button in (gently) in electric biking your system.  Take your finger on the button the moment where he begins to open.  In addition, you are allowed to try and hold the drawer open if she tries to close the bottle.  There are generally micro-switches that detect it and put an end to the attempt to close the plateau or the door.

    You can also get the emergency eject hole somewere around the door (sometimes under a bezel).  It should work with the power on or off, but I do it with the power turned off.  (Paste a conductor in a piece of electronic equipment of power on seems a recipe for disaster to me.)  The hole is the diameter of a large paper clip (the favorite :) tool.  Succession the wire out and push to the right .  There should be some slight as resistance it UN-engages the latch and starts sliding drawer open.  At this point, you should be able to get out the drawer/tray by hand.

  • CD drive does not open on the hard drive of the computer.

    Original title: on my hard drive DimensionE521 the CD-Rom drive does not open.  He starts to and then stops. The computer says it's OK? Help?

    I had this problem and another time after playing with him for days, all of a sudden it just opened.  There is nothing in the drive - I'm sure of.  Everyone has to experience this problem.

    Hello Nannytosix,

    If you look very close to the door of the CD player, you will probably see a small hole somewhere around him.

    What you need to do is unfold a paper clip and push it in the hole and it should open the CD drive manually.

    I encourage you to consult the manual to check this.

    Best regards

    Matthew_Ha

  • My Cd drive does not open

    Original title: BD - rom drive

    My Cd drive does not open. I even sent it back to the factory to get the engine replaced and it used to always open. And if it opens, it read any disk. What should I do? Can I open the player through my laptop instead of hitting the button on the outside?

    Hello Jayde,

    You can look for a tiny hole on the draw draw in which insert a paper clip to manually eject the CD player draw. Follow these steps and check if that helps.

    Step 1: Open Windows Explorer, right-click on the drive icon and choose the option to eject it. If it is ejected from your CD-ROM drive tray, button on the hard drive is faulty and it is recommended to replace the disk.

    Step 2: Also boot in the BIOS and check if you can eject the CD by pressing eject CD player if the problem persists then drive is defective.

    Warning of the BIOS:

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Step 3: I suggest to start in safe mode and check if you are facing a similar question:

    Start settings for Windows (including safe mode)

    http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

    Let us know the status of the issue after following the steps above. So that we can help you further.

  • P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

    Version of Windows 10 Home 1607 (Build 14393.187)

    Hello

    After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
    The D: drive does not appear in Windows Explorer,
    CD-Audios and videos / DVDs do not work.

    In the Device Manager, the following legacy status error message appear:
    "Windows cannot start this hardware device because its configuration information.
    (in the registry) is incomplete or damaged. (Code 19). »

    Could you tell me how to solve this problem?
    Thank you.

    The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
    I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

    More information here:
    http://www.borncity.com/blog/2007/08...-verschwunden/

  • Satellite L500-126-CD/DVD drive does not open very well unrolled

    Hello

    I just got my second Satellite L500-126.
    I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

    Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
    Is this normal?

    Also, when I close the dvd player, I hear a little noise "ping!"
    Like a spring, or something. Is that also normal?

    Thanks in advance.

    Hello

    I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
    This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
    Still, you will hear a short click Open and close the drive.

    So I guess it's ok.

  • CD/DVD-Rom drive does not not on Equium A100

    I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

    I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

    .. .Please help me... I think it is the driver, but I don't know how to fix it.

    Hi mate

    > I installed a webcam, and it made my DVD - rom drive does not not with all drives
    To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
    I see really no connection between the webcam and ODD... very strange
    Do you get any error messages?

    Anyway, in my opinion, you should try these solution ideas;

    (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

    2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    .. then restart the laptop.

    (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

    If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

    Best regards

  • DVD drive does not open.

    DVD drive does not open.  Won't open with the emergency eject button.  Once opened, it will close with the eject / close button.  How can I fix it?  This can cause the drive open suddenly do not?

    Thanks for any help you can provide.

    Hello

    · What is the number and the model of the computer?

    · Do you remember all the recent changes on the computer before the show?

    It seems to be the problem with the computer's hardware. You can check with the manufacturer for assistance on the same.

  • DVD drive does not open. What can I do?

    Yesterday, the DVD drive in my Dell laptop, Inspiron, Windows Vista has worked very well. This morning, the drive does not open when I pressed the eject button, although the indicator flashed several times. Dell support site mentions try "eject feature in Windows", but I can't find information about this.

    It is important to get the DVD drive works because I'm ready to upgrade to Windows 7.

    How can I fix the drive?

    GordonP

    http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html

    http://www.fonerbooks.com/laptop12.htm

    But first of all, you can go in my computer, find your dvd drive, right-click on it and click on eject.

    If this post answers your question, click mark as answer .

  • Nothing does not open my tab when I click on it, what can I do?

    Nothing does not open my tab when I click on it, what can I do? Otherwise everything works fine. But I have to open many new sites of browser in order to work in different areas. I've updated my site so it's not the problem.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • Outlook Express does not open because "he has encountered a problem and needs to close."

    Outlook Express does not open because "He has encountered a problem and needs to close" error report sent many times without success. Any ideas? Thanks, Keith J B.

    original title: Outlook express

    If Bruce's response does not help, then move all the dbx files in the message a directory of storage for OE will create a new message store.  Then see if that solves the problem.  If this is the case you can use the file | Import | Messages to get from the directory to which you move them.

    Also check interference antivirus.  See www.oehelp.com/OETips.aspx#3

    Steve

  • I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

    I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

    Hi phillipt84805120,

    Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services of export to PDF as the older version of Reader support any more.

    Alternatively, you can use services online at https://cloud.acrobat.com/exportpdf

    Let me know if you are still having a problem.

    Kind regards

    Nicos

Maybe you are looking for

  • simulateneous of analog and digital triggering

    Hello I have an experience that is very similar to this announcement: http://forums.NI.com/T5/LabVIEW/how-do-I-reset-the-arm-trigger-with-DAQmx/m-p/2006639/highlight/FALs... As in the display, I need trigger out of logic AND low frequency (3 Hz) and

  • not available in installer creating distribution

    Hello I work now in version 8.6.1 and when I want to create an installer, there is always a message about some products or their depencencies are distributions that are not available. So, what should I do? just insert the CD into the drive and run ag

  • How can I fimd toner is low?

    My dose of the printer does not print and I do not know or the other toner is low. How could I say that the toner is low

  • where can I download the ADVENT awp10 printer driver

    where can I download the ADVENT awp10 printer driver

  • Docking station ruin the battery?

    HelloMy old laptop was a something Lenovo that has been duplicated for me 1 and the same version for my parents...I use to keep my AC when 100% or my battery out when I'm at home. |While they were trendy - overload 24/7...After 2 years mine was still