CD rom drive won't open, please help

Hello

I read the other posts, tried the paperclip had thing open, but when I re-powered, the reader is closed, and now he's stuck again. It will not eject through 'my computer '. Trying to eject the results in the player made a noise like it wants to open, but is not, then a green light flashes 3 times. I checked the Device Manager, who says "this device is functioning."  It's a Sony CD-RW/DVD CRX330E. Can anyone help? Thanks in advance!

Hello

Try again the trombone - remove the disk in the drive (if it exists) and see if the drive will be
open correctly.

Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.

Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

Open a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip

=================================

Check with Sony for other possible solutions. Also check with the Mycelial forums for help
with your model DVD.

-----------------------------------------------------------

If you have problems with the drive after getting to open:

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • My CD DVD drive doesn't open - Please HELP!

    Hello!

    My CD DVD drive does not open.  There is no disc inside and the last time we used it was to watch a DVD.  The greenish yellow light is on, but when you press the button on the driver, it will not be open.  Help, please!

    Thank you!


  • Catalyst Control Center won't open, please help

    Hello everyone I have a laptop HP DV7 - 6 c 00 with a card ATI Radeon HD 7470 M running on 64-bit Windows 7 SP1.

    Now a few days ago, I could open Catalyst Control Center (CCC) or "configure switchable graphics" but now, for some reason that I'm not able to open what makes me really upset because I've had nothing but bad luck with this laptop.

    When I was able to open CCC when I tried to configure switchable graphics, it only helped me select programs to use with switchable graphics, this is not what I wanted.

    I wanted to like my other HP laptop where if I plug my charger it asks me to change graphics card and if I unplug it, same thing.

    I could get my other laptop works correctly with the switchable graphics option in getting the last graphic card ATI radeon for this laptop, but for some reason that I can't do with this laptop. It seems that the pilot of 7470 m radeon hd can only come from HP.

    Even when I downloaded the correct driver or automatic detection utlity Radeon site, it gives me an error of incompatible hardware, and the installation is aborted.

    So very well since I wanted to correct my switchable grahics problem where it is more general (not ask me to change when I plug / unplug the charger) told me that I had to update my bios. Then I updated my bios from HP website. Here is the link I used

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5214391&...

    Okay, so after I updated my bios I've gone into bios and entered the 'switchable graphics option' and changed momentum for "fixed".

    After the reboot, I can not open the CCC (I could not open it before that the bios update or the other, I was hoping that the bios update would fix it)

    Then I tried to go to the "HP Recovery Manager" and reinstall the AMD graphics card driver, which didn't work.

    I tried to go to 'Add Remove Programs' and I tried the 'fix' of 'Catalyst Install Manager' option and it does not work...

    As I said... I am very satisfied with this laptop, it seems that it is almost a daily chore to keep this laptop work properly. Every day, it seems that I'm fixing something...

    Personally, I don't know if switchable graphics has been a great idea/option, I mean, he seems to have the best intentions in the world, but all google searches I've done, it seems hardly all work correctly.

    Now, I am a dedicated HP customer, I bought 10 + laptops and desktops Desktop 5 + years, but I am very disappointed with this laptop... or maybe I'm just upset =)

    Is someone can please tell me what I should do to get CCC works so I can set up my advanced graphics card and fix my switchable graphics.

    Now, none of the drivers were working from the AMD website, but I could try to download their Catalyst Control Center app, do you think it would work?

    I really need some advice on this one there...

    Thank you all for your time and help

    OK well first off I want to thank everyone for all their support and answers! Hahah =-)

    Well, since I've had these great suggestions, it was extremely simple to fix this problem...

    Okay well I was able to find a solution to this problem on mine and here is how I did incase anyone runs into this problem and is in need of a solution as well...

    As I said above "switchable graphics" has never worked on my HP Pavilion DV7 laptop since the first day. So in order to get switchable graphics work where he asked me "can I watch change graphics card" anytime I plug or unplug my charger for my laptop, I had to update the bios.

    After I updated the bios and rebooted the computer I had to go into the bios settings and change switchable graphics of 'dynamic'-> 'fixed '. This would allow graphics cards to move whenever the charger is plugged or unplugged, only graphic rather than spend proccessors on some applications (which is a nightmare!)

    Good then after that I updated the bios I tried to open it "catalyst control center" which does not open. After trying to reinstall the graphics driver to "hp Recovery Center" CCC would not always open.

    So here's what I did...

    First of all, I went 'Add Remove Programs' and remove the Cataylist Installation Manager

    Then, I ran CCleaner and did an analyization of my registry and delete everything that relates to the ATI graphics card, which had lots of locations in the registry.

    Then I went to the official driver from HP site for my laptop computer and downloaded the driver for my graphics driver for Radeon HD 7470 M.

    After installing the driver and restarting my computer, I could finally open Catalyst Control Center and switchable graphics finally working the way I wanted it!

    Well now, this problem is resolved...

    Right, now I always have problems with BSOD (blue screen of death) which I think that I have under control, but now I'm having a problem with my laptop which no matter when he goes into "sleep mode" and I try to take over the laptop, just of freezes and stays on the black screen, even with the light on the button (f10) wifi on and the light button mouse on...

    When it goes into sleep mode, I can't get the laptop to resume, I have to turn off it and then restart it back...

    I swear that this HP Pavilion DV7 was nothing else than to the problems of... but me, I learned a lot by setting all his questions and I hope to have this resolved as well...

    Well I hope that my experience with Catalyst Control Center and switchable graphics will help someone else's problem, and thank you all who participate on this forum (but not on my thread!)  =)

    Well, I just want to say one thing... HP makes great computer/laptop and I love them. All computers will have problems, it's just normal. I know that my next HP computer will not switchable graphics!

    gh0st-HP

  • I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

    I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

    Download and install the last set of drivers (starting with the chipset / driver motherboard) to the ASUS support site: http://support.asus.com/download/options.aspx?SLanguage=en&type=1

    J W Stuart: http://www.pagestart.com

  • Help, please. My CD/DVD drive won't open unless I use a needle and even when he's not reading anything.

    As I have said on the subject my CD/DVD drive does not open and it will not read. My computer sees the problem but has no solutions. That I am, I expected to do?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • DVD-ROM drive won't read DVD

    I have this CD/DVD which will play normal CD but will not play any DVD (DVD + R, DVD-R). I noticed that the DVD would not work when I was a BONE

    RESETTLEMENT. I put in my Windows XP restore disc, and installed successfully. Then I put in my drivers disk that was on a DVD-ROM drive and it wouldn't work!

    I could hear the spinning, but it sounded abnormal, and nothing appeared in my computer. Not open same AutoPlay. Frustrated, I decided to get the drivers of

    sites of different manufacturers, including the driver of CD-ROM to see if I could start the DVD. Even after that I installed the drivers for the hard disk, DVD will not play again.

    Any ideas?

    Hello
    I suggest you run the fixit and see if it helps:
    http://support.Microsoft.com/mats/cd_dvd_drive_problems

    It will be useful.

  • DVD Rom drive does not open when I try to eject a disc

    Original title: dvd rom

    HI.i can open rom.i push to eject dvd but dvd rom not the open.can help me.

    Hello

    1 is this blink when you press the button to eject the CD/DVD drive?

    2. is there the CD/DVD in the CD/DVD drive?

    3 did you changes to the computer before the show?

    4. don't be the CD/DVD drive not detected in the Explorer(My computer) Windows?

    If the led does not illuminate, the reader is disconnected or broken. In this case, you may need to contact the manufacturer of the mounting of the CD/DVD drive system.

    If the led does not blink, you can try the following:

    (a) open my computer

    (b) right click on the CD/DVD drive

    (c) click on Eject and check if the CD/DVD drive eject

  • Equium A100 PSAA43: CD rom drive won't boot from any CD

    Hello.

    I have a problem with the start on equium a100-psaa43 procedure.
    The problem is the cdrom won't boot any cd
    I mean recowery system or any other cd boot as a Live CD.

    My BIOS version 1.5
    I put in place a correct sequence in the bios Setup. I mean 1. Secondly, CD-ROM, is my hard drive.

    What can I do to fix this?

    Thank you.

    Hello

    First of all we should know if the CD rom drive can read any CD.
    Have you tried to read from the Windows OS CD? The operating system recognizes the CD inserted?

    If not, then possibly the ODD drive malfunctions and, therefore, it s not possible to start from the middle.

    Anyway, you can boo from the CD in different ways. First, you can press F12 and you will get a boot menu. There, you can choose bootable devices.
    In the second way, you can try to press the C key immediately after starting the laptop. This button starts the CD player.

  • Card problems or video driver with a N200, please help!

    I have a lenovo 3000 N200, that's really cool, works even at games very well, including the most recent.

    But, is it normal that the pilot program display for freeze-out in Warcraft 3? He always does that when you access the list of cards in the game and after 3-5 minutes during a real game. It defines the resolution up to 640 X 480 (from 1280 X 800) and in 16 colors. I have to reset it to get it to work. Also, it does the same thing in Spore - if after seeing the pilot written for Spore installed, (that I downloaded from the lenovo site) I have not encountered this problem far. In addition, Second Life stops - Fortunately it does not freeze the drivers. I understand that the model I have is not designed for the game, but if it can run Warhammer 40 k: Soulstorm with graphics settings meduim (on the widescreen) without a lagg I do not understand why it would not be able to manage warcraft 3 - even a m200 express ATi can manage. I mean that a X 3100 to Intel must be much more powerful. (ATi said card lagg with older games like Unreal Tournament)

    I have the latest version of the - official - driver and a Win Xp pro Sp2. I always keep my system updated - register for Essilor, but until this driver has not need sp3 - and cleaned viruses.

    Please help me?

    Ooh, it seems that I was right, my problems stems from the incompatibility of the software.

    Namely the based opengl driver (this igfx something of the file that is in the rror reports I receive).

    I solved the problem with Warcraft 3, you have to click with the right button on the icon of warcraft 3 and type the destination line (just after the second "")-opengl or - swtnl. (or - d3d, nota bene, who has not worked for me)

    Although even now it's not as pretty as on my table top pc, it works fine and farily good graphics.

    I think your problem is similar to mine and is amplified - sort of - by Vista somehow, it seems to cause a more severe software incompatibility.

  • Computer screen appear not when the cover is open, please help!

    I use my 19-inch LCD TV as a monitor for my computer laptop windows 7, because the built-in screen broke some time it y a. yesterday, I changed the settings so that whenever I close the lid of the laptop, the screen is always displayed on the TV, but now, everytime I open the cover, broken laptop screen lights up and the connection to the TV is lost , but when I close the cover image appears upward on the TV again. I tried changing the settings I changed back. Anyway I can fix this without a keyboard? Because the only one I have is on my laptop and inaccessible without the lid open. Help, please!

    Hello Hipster,

    Being this recent, try a system restore to the most recent point when everything worked very well.  See http://www.sevenforums.com/tutorials/700-system-restore.html for more information.

    Good luck!

    Kosh

  • Big flash file does not open please help

    Hi all

    Can someone help me please. I have a flash file that is 74 193 KB, it opens quickly on my pc but when I place the load on my site it takes forever to open. What can I do to make it open fast iss he os on one of my important links.


    Please please help

    generally, when creating for the web, you don't want more than 1 MB or more... people don't like waiting for things to load a T1 connection... it would take 6 minutes, Dial-up would take 3 hours... you certainly need that flaked into small sections and make it more dynamic.

  • CD-ROM drive does not open

    Separated from this thread.

    How can I open a disc in my drive, but does not open on my screen?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://Club.myce.com/F61/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • PDF files stored on my hard disk drive won't open

    I can't open any PDF files that are stored on my hard drive.  I can open any PDF files stored online.  I uninstalled Adobe Reader and reinstalled the latest version.  Always without success. When I try to open a PDF file that is stored on my hard drive, it tries to open it in Word 2010 (this used to work), but now I get an error message that says: select the encoding that makes your document readable.  The 3 choices are: Windows (default), MS-DOS, another encoding.  I tried them all without success.  Help please!

    Right-click on the PDF file.
    Select: Open with on the shortcut menu.
    Click: Choose [default] program.
    Letter: Adobe Reader.
    Check: Always use the selected program to open this type of file.
    Click OK.
  • HP Scanjet 6200 / 6250/HP6270A: HP Scanjet 6200 / 6250 / 6270a Driver - cannot be found - please help

    Hi people,

    First post on this forum - so please, be gentle.

    I have a scanner HP Scanjet 6250 (the label on the back actually says "HP6270A"), and I used to use Windows XP.  The software didn't like Vista and HP does not publish a driver for Vista - so it sat on my desk for n years, simply too much room.

    I suddenly had the idea of using program compatibility Windows 7 to install the old software XP - I can't find the drivers/software disc.

    Went to the HP Web site but the only thing he could get to was an office a6270 or telling me that the material was is longer supported by HP.

    I'm surprised that seems to mean same legacy hardware use drivers removed servers!

    Any help with the drivers for this scanner and/or greatly appreciated precision Scan Pro software.

    Bendjombe

    The guys behind VueScan came through, and I can now use my Scanjet 6200.

    HP - useless!

    Bendjombe

  • My dvd/cd rom drive does not open

    I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off.

    Hello

    Try using a tip of a paper clip to open the tray.

    "How to create a trombone in car opener.

    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    "CD-ROM, DVD or other drawer not open."

    http://www.computerhope.com/issues/ch000214.htm

    See you soon.

Maybe you are looking for