CD-ROM/DVD-ROM device driver does not support SQL Server 2014

Similar Questions

• My CD-ROM device driver does not (code 39). This happened after I restarted while trying to load Norton Antivirus on CD.

  I have a HL-DT-ST DVDRAM GH10 ATA Device of DVD and also a HL-DT-ST DVDRAM GE20LU10 USB device on my Windows Vista desktop - system.

  After the restart during installation of Norton Antivirus on CD, the ATA device failed to recognize the CD and Device Manager showed that the device driver for the two devices CD-ROM (System32\Drivers\cdrom.sys) was now not to load. (code 39). Device Manager indicates that it may be damaged or missing, but the driver is in place and date from 04/11/2009. Restart and try to upgrade the driver makes no difference, and he does not always load. All other device drivers work well.

  Kind regards

  Ian

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• DVD/CD-RW drive does not-Tecra A4

  Hi, I have a problem with my Tecra A4.
  My DVD CD - RW drive does not work properly (power is there, but it does not appear on the system), I have temporary installed a drive of DVD - RW from my HP laptop which works very well.
  I tried to run my restore disk (never used), but nothing happens (press and hold C to start). This will only work with the good drive installed or I do something wrong?

  p.s. I bought this second hand, but it's new. He had a damaged screen I have replaced

  Julian

  If the old drive will not read media if it s damage.
  You know that not every disc is compatible with the device because of the csel/slave/master settings.

  You said that the button C doesn't allow you to boot from the disc.
  In this case, I would recommend to get into the BIOS, and there you can change the boot order.
  However, this trick is everything works only if the new drive is compatible and supported

• Satellite Pro A120: DVD/CD-RW drive does not work

  Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

  Have you tried the Device Manager and it says it works normally!

  Any ideas please?

  Thanks :)

  > apparently it has been disabled somehow
  I put t think that the disc has been disabled!

  How someone or something should turn off the drive? You have disabled the drive? I don't think so!

  You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
  You are getting error messages or what's wrong?

  Perhaps the reader can read or burn CDs or DVDs.
  This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

  Maybe the replacement drive is required!

• T420 W7 Base system device driver does not

  Hello

  After reinstalling W7 the lenovo Solution Center complained by saying that the system device driver does not work.

  I saw that the SD card reader was not working and so I covered the missing pilot was that one.

  The Lenovo page I downloaded the driver for the card Multi for W7 and T420 port. After installing the message disappeared and SD cards have been recognized correctly.

  However, after restarting the system, after some time, the message appeared again and the card reader no longer works.

  I have install again and the same happened. He worked and after restarting two has stopped working.

  If find this mysterious altogether. I wonder if anyone knows how to solve this problem.

  I managed to solve the problem. Just in case anyone has the same problem I explain here how I did, although I'm not sure that this solution is universal.

  1 install the drivers from the Lenovo site.

  2. once the system starts to complain from the Device Manager where it says "Base system device" with a question mark. Then disable this device but do not uninstall the driver.

  3 reboot and it will be fixed.

• Its satellite A210-131 driver does not support DirectSound entry

  From Premiere Pro CS3, an error message is displayed:

  -"Der zurzeit installierte Soundkartentreiber unterstuetzt keine DirectSound-Eingaenge"Es ist keine Audioaufnahme possible".
  -"The its installed card driver does not support the entry of DirectSound. The sound recording is not possible.

  Please help me find a working driver. Operating system is Windows Visat Ulimate.

  Thank you
  Siegwin

  Hello

  To my knowledge the DirectSound is an addition to the system of Microsoft DirectX. It should be included in DirectX.
  Please check if you have installed the latest version of DirectX 9 C.

  In addition, I would recommend updating the audio driver. On the Toshiba page, you can find the latest two versions of Realtek sound dirver;
  -6.0.1.5374
  -6.0.1.5406

  If the two will not support the DirectSound input try another on the homepage of Realtek.
  The chip is called Realtek ALC268

• Card error"video or the driver does not support alpha separate mixture, glow will be disabled" when running COD4

  Original title: VGA

  When I run COD4 it says ' error during initialization: video card or the driver does not support alpha separate mixture, glow will be disabled.
  No idea why this is happening?

  There are maybe a few settings in the options/preferences menu of COD.  Your best way is to ask in a support forum for COD.

  In the future (or), before you buy a new game, visit Can You Run It to see if your hardware supports the minimum requirements of the game.

• Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

  I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

  We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
  Kind regards
  Sam Towle

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1: make sure the game is compatible with your computer.

  Method 2: update the video card driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  If both methods fail, you will then need to get a new video card.

  I hope that helps!

• W520 - Base system device driver does not

  Greetings.

  This morning at the start of my ThinkPad W520, the player no longer works. A glance in the (Windows 7, 64-bit) Device Manager shows the 'Base system device' and points out that "the drivers for this device are not installed." Trying to get Windows Installer natively drivers does not work. Some googling shows others with similar problems in the past; recommendations include installing a card reader driver Ricoh for Windows XP or Vista; It did not work. Other drivers available include 8ass82ww.exe and 8axv51ww.exe - these don't work. Installation of the own Support Center Lenovo software shows that the Base system device driver is not installed. I can't find a way to install it. I tried installing driver exe files and searching the same files using the browse-for-the window Windows files during the installation of the drivers for the Base system device.

  Seriously, * beep *? I lost more than two hours on Sunday morning trying to solve this problem. It worked yesterday. I did install new software crazy, or any software besides. Why this happens and more importantly, how can I FIX it?

  This morning, ran Windows automatic update; I don't know if the updates were designed to the card reader, but the driver is now installed and the operation of the device. Too many updates to list them all, but thank you all for your help. Between the time I opened this thread and now probably I rebooted my machine 30 times and tried all combinations of drivers + restart. Then, poof, this morning, it is fixed.

• DVD/CD RW drive does not open

  Drive DVD/CD-RW door does not open.  Tried to open it by going to my computer, media player and selecting "EJECT", but I get a message "error with the player."  Any suggestions?  I have not had any problems in the past with the drive and burned many CDs.  It is not a CD in the drive now.  My computer is only 6 months old.  What can I try to get to open my car door?

  Hello

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• have laptop HP Pavilion dv 1000, formatted, HP site graphics driver does not support Ms 28484, help

  I have HP Pavilion dv 1000 notebook, recently formatted, site graphics driver HP sp 28484 does not support. The message being shown whilemaking Setup attempt is the file does contain no information about the material, put in place closes.

  P/N is EV882PA #ACJ

  Help, please

  Drivers for your laptop by the PN are here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=1842107&query=%20EV882PA&

• Adding a new dvd/CD-RW drive does not work on my PC 4600

  Hi, my laptop comes with a standard cd-rom drive and I bought a dvd/CD-RW drive to replace. When I enter it it appears power because I can open the drawer and the light comes on when I turn on the computer. However it is not coming in my computer.
  I tried several disks so that the player I use is not defective.

  can someone please help me with what I need the dvd function on my laptop for my work.

  Thank you very much

  Tommy

  Hello

  New device is recognized by the OS? Can you use it at all? Is there an error message or is defrost just marked in Device Manager?

• Satellite M40-185: DVD super multi drive does not read the CD

  I own a Toshiba Satellite M40-185. It is mounted with a carpet * a DVD-RAM UJ - 831S.
  When I put the CD - R, which are supposed to work on this drive however it read as a CD - R [i.e. the icon changes from DVD - RAM drive in my computer to a CD - R]

  However, when you double-click the drive it says D:\ accicble not. But it works fine with DVD.
  Recently, I found that it stops between buring DVD as well. I got the replaced disk from Toshiba, but it was not to last long either.
  I wonder if his software level problem.

  I tried to update the firmware but it does not work because it's another drive for this what is mentioned on the website for drivers...

  Maybe it s only a registry error?
  I read different statements here in the forum and especially the deletion of in the upper and lower registry filters helps to address these issues.

  For more information, see this page of Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and then restart the laptop

  Good luck

• CDDVD TSST CORP TS-L633M ATA DEVICE DRIVER DOES NOT

  OK so I went on the website of windows (http://support.microsoft.com/gp/cd_dvd_drive_problems) and downloaded and ran the program that makes it surprisingly found the problem and tried to fix it but in doing so, I got a message from PILOT of FACILITIES of SOFTWARE developed in the taskbar that says that it not to repair the failing TSST CORP CDDVD TS - L633M ATA DEVICE driver. So now that it is said "Please consult the manufacturer of your device for help to get this installed device." who should I contact?

  -J' have a HP PAVILION DV6 121 6SA

  Hi Woody94,

  TSST CORP stands for Toshiba Samsung Storage Technology Corporation. This pagehttp://www.tsst.co.kr/korea/en/techinfo/svccenter.php gives a map of service centers around the world. You will probably find an email from support by placing the center of service to you.

  If not, have you contacted HP support to see if they can help? http://WWW8.HP.com/UK/en/contact-HP/contact.html This link is to HP support to the United Kingdom. If you are in another country, just visithttp://www.hp.com and check the support pages or contact pages. You can also consult the user's guide for your PC to see if support details are included here.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

• DVD/CD RW drive does not work after update from Vista Premium for Vista Ultimate

  I have a gateway notbook, series P-7805u - 8400.  DVD/CD RW drive was working fine until I upgraded to Vista Ultimate.  Now, I can't even restore to a point before the update, nor that I can run my recovery disks.  I have to correct this problem.  I hate not having a phone number where I can at least speak to a technician or a place where I can scream my lungs.  I need help, real help.

  Something is terribly wrong when you spend too much for a product that doesn't work not as advertised and then you can't get the help you need when you need it.  No wonder they want to keep things civil here...

  Oh my God, bless you... it works!  After removing the filters (try manually this hotfix if the Fixit 314060 does not
  ( http://www.pchell.com/hardware/cd_drive_error_code_39.shtml) after reboot, everything is back.  THANK YOU, THANK YOU, THANK YOU.