CD-ROM:Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

I tried update driver, disabling, uninstalling and reinstalling, but the same error comes back.

Hello
Consult this site.

If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

If your issue is resolved, please indicate then your wire is with solution.

Tags: Windows

Similar Questions

  • Equium L20: Lost CD/DVD drive - driver may be corrupted or missing (Code 39)

    I just lost the driver POINEER DVD - RW DVR-K16S. For some reason, it's a troublesome TI since im doing a computer course, I've been online and can not find the driver at all, I tried also to update via Windows and nothing. "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    This is the message I receive via the Device Manager. Any help or pointers as to get this driver greatly desired. I can load the driver myself i just have to find it. The driver disappeared after apron anything malicious on a CD.

    Thank you very much

    Check this box:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

    It should work! ;)

  • Satellite A210: ODD does not work - driver may be corrupted or missing - Code 39

    The STRANGE ('TSSTcorp CDDVDW TS - L632H ATA Device") does not work on my laptop more.

    In Device Manager, the Properties dialog box says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    laptop: A210
    OS: Vista 32 bit

    I think the material is OK, as I install dual-boot linux, the STRANGE works very well under linux.

    I found updates of firmware STRANGE on the Toshiba site, but these cannot be installed with the drivers dysfunctional.

    Is it possible to find the drivers somewhere? (I can use google, but I don't know if driver download sites are trustworthy).

    Any other ideas?

    Hello

    This has been discussed a lot of time here;
    The workaround is;
    -remove the ODD of Device Manager
    -access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    -restart the laptop

    Good bye

  • I can't read a disk in my computor what can happen in the properties of windows cannot load the driver for this hardware device, the driver may be corrupted or missing (code 39) can anyone help

    I went to put in a cd to look and he wanted to get on-screen computor Ive seen it before, but for some reason any it stoped working. I went on a local drive Q and click with the right button to open it, but then it reads that q:\ is not accessible. access denied

    Hello

    1. on what application you are trying to read the disc?
    2. don't you make changes to your computer because of which the question began?
    3. is the relevant question to a specific application or a disk?
    4. what operating system is installed on your computer?

    There are many causes of Code 39 errors:
     
    * A required device driver is missing.
    * A required binary file is corrupted.
    * There is a problem with the file I/O process.
    * A pilot that refers to an entry point in another binary file cannot load.

    If you use Windows 7, we will first open the convenience store hardware and devices to perform automatic troubleshooting services.

    You can also click "Run now" to this article and check if this is useful.

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  • Device Manager show that this driver may be corrupted or missing (error code: 39) on CD/DVD devices

    Device Manager has a yellow ball with an asterisk on the CD & DVD devices.  My computer does not display a device.  The Device Manager has a message that the driver may be corrupted or missing (Code 39).  It happened after uninstalling Norton and McAfee installation.  I uninstalled McAfee and tried to install the drivers.  I uninstalled and reinstalled the device.  Still no CD or DVD displayed in my count.  Everybody recognizes the problem?

    Original title: CD & DVD devices do not work

    Try following the steps under "Windows XP" in the article following the MS KB:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • HP Pavilion a6109n Vista 32 - bit, windows cannot load the driver for ATAPI DVD A DH16A1L CD-ROM

    HP Pavilion a6109n Vista 32 bit
    Windows cannot load the driver for ATAPI DVD A DH16A1LCdRom

    Hello

    Try the Microsoft fix it Center.   You receive this error code?

  • SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

    Original title: CD/DVD drives do not work after upgrade from XP to Vista

    I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

    Hi krt2,

    In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

    You can try to uninstall and reinstall the driver for the device to solve this problem.

    Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

    a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

    c. on the device properties dialog box, click the driver tab, and then click on uninstall.

    d. restart your computer.

    Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

    See the links below for more details on the update of drivers:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also, read the following article and check if that helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Equium - Windows cannot load the device driver for USB dongle

    I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    -what it means and how can I solve this problem?

    Hi Ozcat,

    What USB dongle is that exactly?
    What cell phone do you have?
    What operating system is installed?
    Have you already tried to reinstall the driver for USB dongle?

  • COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    Running Server 2003, Web Edition SP2 Build 3790.

    The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

    Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

    Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

    http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

     

    Diana

    Microsoft Answers Support Engineer

  • My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

    http://support.Microsoft.com/kb/314060

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • Re: Card C-media - Windows cannot load the driver for this hardware device. (Code 39)

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    Reference Dell 3000 win xp family, sp 2 card its replacement will not install right.

    I just reinstalled windows on my Dell computer and have struggled to reinstall the different divers, applications and programs that I used to have.  The long, everything went well, except for the audio part.

    Windows Device Manager shows the icon replacement C-media with a yellow top warning label. Under "Properties", it shows this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)  Click Troubleshoot to start the troubleshooter for this device.

    I uninstalled and completely removed all traces of the drivers C-media, etc. of my computer, rebooted, reinstalled the driver C-media since the original CD (several times!), but the yellow warning label is always there!   When I ask to reinstall drivers C-media a notice tells me I have the best drivers now.

    BTW, the audio worked perfectly in this machine until the windows reinstall so I am sure that the problem is not with the sound card, drivers or the installation CD.  Thanks for any help on this, jim

    Hello

    Please follow the steps from the link below.

    http://support.Microsoft.com/kb/310123

    I also suggest you to install the drivers from the Dell site.

    http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  • Windows XP cannot load the device driver for the CD burner. The driver may be corrupted or missing. (code39)

    I have a HP Pavilion running on XP.

    Device Manager displays the following material: A: HP CD Writer CD16b

    B: pioneer DVD - RomDVD - 116.

    Both have the dreaded yellow symbol showing that they are not working (they do not show in Windows Explorer)

    By clicking on the two points of product

    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39).

    I created the 'properties' of each machine that pilots should be:

    For a. imapi.sys, redbook.sys c:\windows\system32\storprop.dll, pfc.sys and similarly for B machine.

    I copied imapi.sys, redbook.sys, and storprop.sys from another XP computer (which works well), deleted these drivers and pasted in the replacements.

    Does not cure the problem.

    Now the pilot 'pfc.sys' cannot find anywhere else. Click on the driver generates (v 2.1.0.165 Inc. - Padus ASPI Shell)

    I'm out of my depth now. No idea what is ASPi Shell.

    Help, please

    The problem is most likely the pfc.sys.

    What I would say, is to follow the steps under "Windows XP" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

    Following steps should remove pfc.sys which may have been left to the wire after that uninstall of software associated with the readers.

    Here is some info on the pfc.sys:

    http://www.Neuber.com/TaskManager/process/PFC.sys.html

  • Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

    Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

    Hi BarbaraWolfe,
     

    There are many causes of Code 39 errors:

    • A required device driver is missing.
    • A required binary file is corrupted.
    • There is a problem with the file I/O process.
    • A driver that refers to an entry point in another binary file cannot load.
    Re-install the driver by downloading it from the link given:
     
    Additional reference on:
    Check if that helps.
  • Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    Original title: Add/Remove components error and DVD driver error

    Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

    Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

    I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

    Hello
     
     
    Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123
     
     
    Method 1.
    Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems
     
     
    Method 2.
    Also, try the methods listed in the section below and check.
    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Original title: the answer useful?

    Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • HP Mini 210 1091nr: Hp Mini 210 1091nr. I get a screen for administrator password or unlock password

    My computer Hp mini 210 has been sitting for months. All passwords are forgotten. When I try the passwords nothing works. After 3 times to try, I get an error code of 50147723 to disable the system. [Personal information] How to use this form of the

  • Update driver graphic Pavilion p6719c

    Hello I wanted to update my video driver from HP driver & software page. Problem is that the file)

  • Unconditional hard disk Format

    Hello If I did a unconditional format of my hard drive and then installed Windows 7 and Microsoft Office, and then it will load automatically Google, web, networks, etc., or should I do something else? I did on a stand-a-alone computer formats, but n

  • No.-xauth, mode-config-No.

    What is the meaning of [No.-xauth, no.-config-mode]? Disable the VPN software if executed [No.-xauth, no.-config-mode] connection?

  • Related Windows related

    Hello Sir, today I did facing a problem on the user account I have win 7 have also two admin account on my phone today, I deleted an account, but I save my account information now I'm not get my data so where can I find it please help me because this