cDAQ does not run with an executable/installer file

I built a VI that works without problem on my host computer (laptop running under Win7, LabVIEW 2009) I'm installing on a Windows XP computer.  Install goes fine, but when the target computer is running that the cDAQ is not working.  He is there waiting.  I have other material (card relay MCC USB-ERB24) which works as expected, but not the cDAQ.  The 'Active' light even never sparkles.  Thoughts anyone?

Thank you!

C


Tags: NI Software

Similar Questions

  • void VI does not run with the main VI.

    My main and sub VI is attatched.

    danil33 wrote:

    Re: void / VI does not run with the main VI.

    When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

    Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.

  • Sony Vegas Pro 9 does not work with QuickTime or MP4 files

    My Sony Vegas Pro 9 does not work with MP4 files or all the Quicktime files. I know this doesn't have much to do with Windows XP but I just thought I would ask, if you need any information I would be happy to give you.

    Take a look at what it fixed my problem with Vegas platinum 9.0.
    http://www.custcenter.com/cgi-bin/sonypictures.cfg/php/enduser/std_adp.php?p_faqid=4787&p_created=1254146741&p_sid=q91HHDok&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NCw0JnBfcHJvZHM9MTcmcF9jYXRzPSZwX3B2PTEuMTcmcF9jdj0mcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1tcDQgcXVpY2t0aW1l&p_li=&p_topview=1
    This is a link to the FAQ from Sony

  • Media Center does not run with portable remote HP RC6

    Hello
     
    After installing SP1, I have observed that the remote control RC6 does not launch the media center when I press the green button.

    Looks like it is a problem with HP, laptop computers SONY after installing SP1. When clean installing it worked very well. As the WUpdate installed SP1 its ' media center alone do not launch. But once the MC started manually in the menu start the remote control works well.

    Any help?

    Hi SimpleOS,

    Thanks for posting your request on the Microsoft answers Site.

    In addition to the previous answers, to check, you are currently able to launch Media Center using the RC6 remote and if the issue is resolved? Also, to solve the problem of the feature buttons to quick launch, try a clean boot in Windows Vista in order to determine if a background program may interfere.

    For reference, please see the following link to get the procedure perform the clean boot in Windows Vista.

    http://support.Microsoft.com/kb/929135

    Please pass the State after the clean boot and also if the RC6 remote control works properly so that we can provide additional assistance.

    Thank you

    Mary
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • After loading a CD for word 2007, that it does not run automatically, it shows the files and then I select setup.exe to launch

    Why the Autorun does not WORK? AutoPlay can be disabled? If so how can it be turned back on?

    It can be disabled or enabled. Why it is disabled for you now, I don't know, but here's how to reactivate it:

    http://support.Microsoft.com/kb/967715

    Scroll two icons Fix It. You can also do this in the registry, if you feel comfortable with that. The method is further down in the document.

    SC Tom

  • MacBook battery exploded and now does not run with charger

    Recently, I replaced the battery in my MBP and it worked fine for a few weeks then one day, I woke to find the swollen battery and the bulge of the keyboard. I removed the battery and the thought that I would use just the charger as I had done in the past, but the MBP would not turn on and there is no light in the charger when I plug.

    I have a Macbook October 2011 17 "Pro release. I think to repair itself but I was wondering if someone might be able to help me with what could be the problem before I go this route.

    Would it be the charger, or did the battery exploding to destroy it completely. I also noticed that plant in the charger plug is smaller than the others. This can be normal, and I have never noticed before.

    Any help would be appreciated.

    Thank you

    You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple. You can be denied assistance if you did not replace the battery with a battery or certified Apple-made.

  • lap top hp pavilion dv6500 does not charge with all my work files, it loads up as a temporary profile

    any help please

    This widget could not be displayed.
  • first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»

    first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»   Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?

    Jürgen Freund

    First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?

    I found this YouTube video about the error 126 precisely to solve the problem.

    How to fix the ERROR 126 when you open programs OpenGL - YouTube

    The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)

    LoadLibrary failed with error 126: could not find the necessary

    Please let us know if it worked for you.

    Thank you.

    RTA

    Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.

  • a preparation free gata with GK Publications cd does not run on windows 7 Home Basic.

    A cd of free door preparation with GK Publications does not run on windows 7 Home Basic.

    I have buyed a book for the preparation of the door named GK Department with a cd inside, it includes the series of door documents test to practice. But it is to create an error message problem showing that Microsoft.jet.OLEDB.4.0' is not regestered on the local computer.    Please sort out the problem as soon as possible.

    Hi preyashi,

    Thanks for posting your question in the Microsoft community forum!

    I understand that you are having problems running a program from a CD on your computer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

    (1) did you make any changes before the show?

    (2) you are able to run the other Setup program on your computer?

    Senario 1:

    See if it is compatible with Windows 7.

    If this isn't the case, you could try installing in compatibility mode for Windows Vista or Windows XP.

    If the program is not compatible, then you try to install and run the program in compatibility mode.

    Use the following steps:

    (1) right click on the program.

    (2) click on Properties.

    (3) click on the tab compatibility.

    (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

    Check out the link here: make sure to run older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    If compatibility is not successful, then try and run the program compatibility problems:

    1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

    Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

    2. follow the instructions in the troubleshooting.

    If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

    Senario 2:

    The behavior you describe is expected if your application runs in 64-bit mode, all components that use must also be 64-bit. There is no 64-bit Jet OLE DB Provider, so that you get the message as described. You will receive a similar error when you try to connect to a database by using OLE DB or ODBC if there is no 64-bit of the specified OLE DB provider or ODBC driver version.

    This problem occurs only in applications that run in 64-bit mode. Compiling the application so that it works only in 32-bit mode is the current best solution.

    You may need to contact the manufacturer of the program to find out how to set the path target to x 86.

    More information

    32-bit and 64-bit Windows: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

    Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

  • Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

    Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

    Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

  • Whenever I run Safari my fan comes at top speed and gets hot.  This does NOT happen with Firefox

    Since I upgraded to El Capitan, when I launch Safari, my fan is running hot, CPU goes into battery and use 100% drops quickly.  This does NOT happen with Firefox.

    Force Quit Safari and then restart Safari while holding down the SHIFT key. This will launch Safari without plugins or extensions. If works in Safari you have to remove all extensions you have installed and reinstall better one at a time until you find the offending Safari extension.

  • Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

    Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

    Double post please see also /questions/925441 #answer - 326583

  • Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

    Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

    Ritu

    Hello

    1. you get any error message?

    2. don't you make changes to the computer before the show?

    Please follow the steps from the link below.

    http://support.Microsoft.com/kb/279242

  • I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I rebooted, restored, ran chkdsk, sfc/scannow, uninstall/install update etc...

    I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I have rebooted, restored (im doing this), ran chkdsk, sfc/scannow, malware, virus, uninstall/install etc and my machine wil always do not run for a long time without going through some sort of problem after an hour or two.  Can anyone suggest what to do about this? I read a lot of information online on all the windows 8 and fixes bugs, etc, but anything Microsoft/Windows, which ensures its customers, a hotfix or compesating their customers with software that still works. This isn't a hardware problem, and I can't keep day and bad shooting and trying to fix the day things in?

    Sincerely,
    A client who is a loss for words.
    Here are some problems in no particular order.
    1.) apps to not install it, and/or Windows saying they are when they are in fact not. The fix to install / uninstall, or get on the site of windows directly in general does not, and or does not at all.
    The change permissions 2.) does not work on files that you should be able to access in changing oxnership, permissions, etc.
    3.) Google chrome won't let me access my account of microsoft (or fact rarely) trying to access assistance. But internet Explorer doesn't?
    Randomly will increase from Internet 4.) a previous connection wired to wireless to a reboot.
    5.) my 8 'key' windows was only shown to me after that I have let Windows scan my machine online? Why? I paid for this... I restarted it and it says: service not available (it worked the third attempt which was 1-3 minutes after the initial analysis). Windows only showed my product ID not the key. I know that my victory. 8 was OEM when preinstalled I bought it new, but why didn't we files on it that had nothing to do with activation, appearing on dates for three weeks, or so before I bought it. What is the 'activation of the factory'?
    6 :) Windows Essentials does not hang for a long time, and the troubleshooterprogram of update simply does not work (I had to go to the website to try tp operate, the bluetooth functionality is not good that there is an error.
    7.) windows scan and repair gets stuck at 27% (Im not the only one with this problem).
    8.), avery MS Office 2013 Disappears so often and not easy to reload "we have encountered a problem.
     

    The computer manufacturer is responsible to see that it works properly with Windows 8. It says that it is a new computer I contact HP and make these problems their. If you don't get satisfactory results I turn and look elsewhere for a computer. Hope this helps and if you need another post to help and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

  • Free trial installation does not work with my windows

    Need help, late last night, I installed the new photoshop Lightroom 4.2 and didn't know that it does not work with windows XP.  Is it possible to downgrade my program installed to one that works with windows xp?

    N ° Adobe sells only current versions. And why would you want to cling to an old BONE in 10 years?

    Mylenium

Maybe you are looking for