cdfs.vxd, cdtsd.vxd and files cdvsd.vxd missing in Vista Home Premium for CD drive does not recognize the disks of data-help

Similar Questions

• My computer won't let me not reinstall windows because he thinks that it is 32-bit and does not recognize the installation discs. Help please?

  My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.

  Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."

  What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »

  I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?

  Thank you very much.

  In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).

  Hello

  Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.

  ASUS support

• CD/DVD does not recognize the disks and will not be closed

  original title: problem with tray D

  I use a unit of reconditiioned Dell 8300 with XP Professional system.  The unit was slow and gel a bit so, in one of the slow itls break cycles I insereted in the toolbar an old XP disc I had to front to see if that would help and after I closed the tray I noise loud crash and the tray came out showing broked pieces of the disc. I flipped the unit and hit the bottom and more pieces of the disc came out.  Now the set is not closed.  If I insert a workable disc and maintain status bar tap it will not do anything and a window tells me to insert a disc. Shou ld I try to disassemble the unti to see if there's still some piece or pieces preventing reset the tray? Or is it to say that I'm going to my repairman authorized Microsoft for the rerpair?  E-mail address is removed from the privacy *.

  I'm really sorry to laugh, but this is a funniest post I've ever seen. Apparently you've damaged the device rom (cd/dvd drive) replace it with a new one. They measure less $ $30 .00usd. Furthermore, placing the old drive in the drive xp will not improve the performance of the computer. Looks like you have some malware. I recommend that you post in the section virus/malware of the forum on the link below for a complete analysis. The forum is free. While I could recommend some scanners, I think you need a full inspection.

  Free Forum: repair-Bots Online

• filmmaker does not recognize the MTS files

  I use Widows VIsta.
  I used the windows Director to edit MTS files and was very satisfied of this. Then it stopped working, it does not recognize the files more. As I have understood, by browsing forums, Director of windows LIVE should treat this type of video file. I've updated Windows LIVE essentials and requirements. Still not recognize the MTS file.  Can someone help me? Thank you.

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code. Or it can convert your video to wmv video for a test, I know that windows movie maker supports wmv video well. And this guide will show you how to convert mts video to wmv video.

• I can't sync my iPod to Windows Media Player. WMP does not recognize the iPod and I can't drag music files between them

  My iPod is connected to the computer and it works fine with iTunes.  But I can't get the music in Windows Media Player to iPod.  When I try to sync in Windows Media Player, it does not recognize the iPod, and I can drag files from WMP to iTunes or the iPod.

  You cannot synchronize an Apple product in itself using WMP, unless you buy a 3rd party. You must use iTunes.

  See you soon,.
  Jerry

• How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  I want to continue my membership with Adobe, however, not if it requires some additional software purchase.

  For .ai files, you will need to use or know someone who uses Illustrator or another program compatible .ai to convert. If you access a page of image details before license you can see the file type.

• When I go to move file e drive windows does not recognize the format

  ORIGINAL TITLE: files and folders

  running windows xp pro version 2002 service PAC 3, when I go to move the file e disc windows does not recognize the format, already file types are jpeg and php have tried a restore and fix computer center has not helped. Any suggestion or solutions would be appreciated ARTuro_974

  Thanks to all the answers, don't know how, but the problem fixed, have learned a little about pc THANKS AGAIN to all.

• Can not connect. He does not recognize her fingerprints and does not recognize the password

  Original title: cannot open a session

  my friend cannot connect to his pc. For some reason it does not recognize fingerprints and then when he tries to connect manually using his password, it says it does not recognize the password, even though he knows that it is correct. Does anyone know why this is and how to solve?

  Hi Knightofkent,

  You can read the article and check if it helps.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  I hope this helps.

• does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Original title: Pny flash drive problems

  I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Hello

  Do you see these error codes in Device Manager?

  Plug the flash drive and run the Fixit of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  See also the section below, which might be useful in solving the problems of USB devices.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Windows Media Player-does not recognize the mpeg4 files

  My media playes does not recognize the mpeg4 files

  I recently had to re - install windows vista, after that everything works well, but when I try to read a MPEG4 file, it gives me an error message that it can't play at this time of the fine.  It plays music, mpg3 files fine... I tried to do a 'quickfix' but it didn't work.

  Hello

  I suggest you to download and install the latest pack of codec for Windows Media Player. Make a search using your favorite for more information search engine.

  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Movie Maker does not recognize the MPEG2 files that are created from my new video camera. What can I do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  ======================================
  You run Vista Movie Maker 6? Might be interesting to try
  Convert MPEG files to WMV format before importing.

  Or... it may be interesting to try to install Windows Live Movie Maker...
  which could be compatible with the MPEG2 files.

  Windows Live Movie Maker
  http://explore.live.com/Windows-Live-Movie-Maker
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows does not recognize the .themepack files

  Hello

  Microsoft, I downloaded several .themepack files.  I have Windows 7 Home Premium (32 bit), and it does not recognize the files.  In other words, when I click on the files, they do not open and install.

  " Strangely, when I click the .themepack file properties, it says"Opens with"the" Windows Shell common DLL. "Still more strangely, when I go in the file Extensions Manager in Control Panel, the .themepack extension does not appear.

  I tried to reboot, etc.  Is there a way to fix this?  Otherwise, there is a long workaround solution that I can do to get funds from the .themepack file and install it manually?

  Hi harpsichord,.

  Can you check something:

  1. Press the Windows key + R > type regedit and press enter
  2. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.themepack
  3. Make sure that there is no key UserChoice (subfolder)

• Win 7 does not recognize the file type for the installation of the theme.

  Original title: download and install desktop theme

  I would like to install the panoramic snow theme but shows like PanoramicSnow.deskthemepack file extension. Win7 does not recognize the file type for the installation due to the addition of the "office" in the extension.  would it be possible to have that corrected please?  Thank you!

  Hello PMacCk,

   
  Thanks for posting your query in Microsoft Community Forum.
   
  Basically, the .deskthemepack extension is not recognized by Windows 7 because it is introduced in Windows 8. The new "panoramic" desktop themes all use this format.
   
  For reference, please see:
  1. http://windows.microsoft.com/en-gb/windows/snow-panoramic-download-theme
   
  2. http://blogs.msdn.com/b/robmar/archive/2013/11/26/snow-panoramic-theme-for-windows-8-and-windows-8-1-now-available.aspx
   
  There are still regularly .themepack themes available and those who continue to work in Windows 7 and Windows 8. Please visit the following link to download and install the themes:
  Themes
  http://Windows.Microsoft.com/en-GB/Windows/themes
   
  Hope this information is useful.

• My version of Lightroom does not recognize the RAW Olympus Pen - F file

  My version of Lightroom, 6.3, does not recognize the RAW Olympus Pen - F file. When an update that contains my new camera? Thank you

  Yes, version 6.6 will support raw files.

  Of course, you can test and report.

• I just bought 6 of Lightroom. It does not recognize the RX10II sony raw files.

  I just bought 6 of Lightroom. It does not recognize the RX10II sony raw files.  (RAW ARW file type).   I checked the web site of Adobe, it says version 6.1.1 LR. reads the ARW files.    6.1.1 seems to be only available in CC.  Is this correct?  My purchase was a waste of money?

  Advice please.

  Lightroom 6.1.1 isn't Lightroom CC. Lightroom 6.1.1 is a stand-alone version and not required Lightroom CC. This is a free update to the version you have now. Download the last 6.3 maintenance of Lightroom Lightroom