CEC_main.exe and TosIPCSrv.exe does not

Error messages received at the start for these two files. "Cannot run CEC_main.exe... Please reinstall" and "TosIPCSrv.exe has stopped working and was closed..." "How can I sort this point, please? May be related to the installation of the toolbar for Firefox?

Post edited by: humphreyyg

Hello

I found an info that the TosIPCSrv.exe seems to belong to the Toshiba S.M.A.R.T. Log Service

I think that it of a utilitarian protection of the HARD drive and maybe you should try to reinstall it.

Welcome them

Tags: Toshiba

Similar Questions

  • CEC_main.exe does not start on my Satellite P300-17R

    Hello, I have a Toshiba Satellite P300-17R and when I run the Windows Vista (32 bit), an error message is displayed. This message is:
    Cannot run cec_main.exe. Pleaseinstall this program once again!

    Since I have a laptop pre installed I do not have the installation disc.

    DOE anyone know where I can find the driver / software to reinstall this programm of camera or solve this problem.

    Thank you

    René Bye

    Post edited by: renene

    > Since I have a laptop pre installed I do not have the installation disc.
    ' ' I don't know how long do you have this laptop but it is strongly recommended to create the recovery DVD disc using preinstalled "Toshiba Recovery Disc Creator. It is very important for you. If something goes wrong and you will not be able to use the operating system more how do you install again?

    Return to described the issue. Please visit Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp choose your model of laptop it and download and install webcam driver. Before you do this the system version preinstalled deletion.

  • To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

    To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

    If any document available please send my email id

    Thank you & best regards

    Martine

    Hello

    Thanks for posting your query to the Microsoft forum.

    Please see the suggestions in the following threads:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/msgexe-netsend-anything-availible-on-Windows-7/e9743edc-AFA9-4942-b1c7-66baf443067b

    https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/net-send-in-command-prompt-does-not-work/00ce5137-dff7-49e5-8511-943e55b83bd7

    Let us know if you need more assistance. We will be happy to help you.

    ___________________

    Thank you best regards &,.

    Isha Soni

  • TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

    Hello

    I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
    I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

    Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

    I am the administrator!

    If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

    I have a Toshiba Satellite U400 and I installed Win XP too.
    I have a user account administrator and Toshiba Power Saver works properly!
    No problem don't like on your system!

    However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

    Check that both are enabled!

    If this doesn't help then reinstalling again this tool.

  • Explorer.exe does not work correctly.

    Hello everyone.

    My name is George Sebros and I have a Toshiba Satellite A300.
    The reason why I post this new topic, it is that I need a little help from someone who knows something about my above problem:
    One day, about 2 months ago... I turn on my Satellite A300.
    When he connected, not only none of my icons appeared but also the start menu does not...
    The only thing that appeared in a screen totally BLACK, has been my folder "Documents and Settings" which opened automatically.
    There was no way I could find neither the start menu (I mean the taskbar), or my icons...
    So, whenever I close the Documents and Settings folder that had appeared, the only thing I could see was a black screen...
    It was a kind of shock to me and I couldn't believe my eyes...

    After a few days, I tried the well-known combination "Ctrl + Alt + Delete" to see what was working and what was not.
    Then I pressed the 'FILE', then 'NEW TASK' and finally, I typed the word 'explorer' in there.
    That's all! Suddenly, all turn to normal like the day before the problem started. I was happy with it, I could use my Satellite A300 again!
    However, it is an indirect way to do my work PC!
    This means that I'm still fain to use this indirect way to make the icons and the taskbar appears.
    This means that the 'explorer.exe' does not work?
    Many programs registry I use notify me on some HKY... files that contain DATA NON. I have to let you know that the explorer.exe is located in the (empty) folders.
    It indicates that transplant programs that I use, point out the problem I have?
    Can someone help me?

    I don't want to use the safe option of FORMATTING (also known as the FORMAT).
    Thanks in advance,
    George A. Sebros

    Hello

    Seems that your Vista is confused upward
    You can try to clean the registry and operating system in order to avoid the new installation of the OS.
    Please use the CCLeaner.

    I use this tool as well for free and it cleans the registry and other files at the time.
    It really helps!

    But if the BONE still does not work properly then you should try a new installation
    Of course, this procedure is radically because the HARD disk should be formatted, but on the other hand, you will get a clean and functional BONE

  • "prism3d.exe does not work.

    What this means when a game box says "the prism3d.exe does not work.  The game is 18 wheels of steel convoy.

    Hi TomDimitroff,

    What version of Windows are you using?

    If you run Windows 7 OS (operating system), this game does not work.

    For more information about compatibility, see the link:

    http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=18%20Wheels%20Of%20Steel%3a%20Convoy&v=Valusoft&uid=&l=en&pf=0&pi=0&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=32-bit

    You can try to run the troubleshooter in the Windows program compatibility and also try to manually change the compatibility settings. See the link below:

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  • Setup.exe does not properly

    I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

    Repeat: You need upgrades to Windows 7 not Windows updates.
    http://social.answers.Microsoft.com/forums/en-us/w7install/threads

    Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

  • Windows 7 VB 6.0 project exe does not work in windows XP

    Hello!

    Currently, I switched from windows Xp(sp 3) to Windows 7 (32 bit). Now, I did more recent SalesProject.exe by using Visual Basic 6.0 in Windows 7, its fine on Win work 7systems. But even SalesProject.exe does not work when I run it on Windows Xp systems. It returns error on Win Xp ' class is not compatible Automation).

    Please see the following sample code in VB6.0

    [CODE]

    Private Sub Form_Load()
                  
    MsgBox ("stage 1") ' run Ok

    Dim rs as new ADODB. Recordset ' (I tried ADO 2.8 and 2.0 as) error comes on this line

    ... etc.
    End Sub

    [/ CODE]

    Any help?

    Thank you

    Hello

    Because the problem is related to Visual Basic, I recommend you post this question in the Forums of Visual Basic.

  • Explorer.exe does not start automatically

    HII,

    When I restart my laptop is wrong on the desktop whenever I need to run explorer.exe thru new task (from the Task Manager)
    I also put explorer.exe at startup option still i m facing the same issue.
    How to solve this problem?

    Hello

    Logon as administrator

    Regedit start - type in the search box - CONTROL top - right Click-RUN AS ADMIN

    Navigate to this key

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

    In the RIGHT PANE, double-click SHELL - value data and the entry should be explorer.exe.

    If you have ANY other information it please write and post here and of course change to the above

    Close Regedit and restart.

    Windows Vista explorer.exe does not start at startup
    http://www.WinVistaClub.com/T231.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • "u3ajwry.exe" does not work on startup. What does that mean?

    I get the message 'u3ajwry.exe' does not work. What does that mean?

    There is no entry listed in the start menu to the top

    Can't see the full command and nothing happens when I double click on the edge of the column rt hand.

    Errm. Is there is no entry in the msconfig Startup tab then there is no complete command to try and see!

    If this only happens at startup, it may be in via a mechanism not covered by msconfig. "Autoruns" should be. You can download Autoruns here

    http://TechNet.Microsoft.com/en-GB/sysinternals/bb963902.aspx

    Once again, to see the full command (equivalent column is called 'Image path' by Autoruns), you may need to widen the column by dragging the right edge of its title, the mouse pointer will change when you can drag to expand

  • Implementation error "the application BTTray.exe does not able to initialize properly" soon after connecting to Vista Premium 32 bit. Same error when you try to connect to Citrix, "the wfcrun32.exe application could not initialize correctly.

    On my laptop Dell Studio 1555 with 32-bit Windows Vista Premium (with SP2), as soon as I connect, I get an error "the application BTTray.exe does not able to initialize correctly. Click OK to terminate the application". Then another pop-up window appears the error information. After awhile, it prompts you to close the program. This happened since I updated the Bluetooth Widcom software from the DELL Web site. I tried to uninstall the software and put it back in place for the DVD that comes with the laptop. But that did not help.
    Yesterday, when I tried to connect to the remote Citrix server, so I was able to work remotely, I got the same error for the software Citrix, "the application failed to initialize properly wfcrun32.exe. Click OK to complete the program." Then another pop-up window appears the error information. After awhile, it prompts you to close the program.
    My colleague, who also has a laptop with Vista home is able to connect to Citrix without any error. He said he did a lot of configuration changes in the security features in vista.
    Is could someone please help me get rid of these annoying errors?

    I came across a similar story, while answering a different question, earlier today.  It seems to involve Dell machines and a corrupt file of the MFC80.dll.  If it's useful to you or not, I'm not sure, in any case, you would like to read this link.

    2.0 secure Local data RMCPlg.exe and BTTray.exe errors
    http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&DL=false&l=en&s=Gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en

    The previous post, I referred to was this one.

    The Groove application error
    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/10c8f8d6-D225-481e-99CA-4e048d401c2c

  • SMffb_302.exe does not no error

    I get an error message (SMffb_302.exe does not). I just tried to download an antivirus program, but my computer will not install it. Any ideas on how to solve this problem? Thanks for the help.

    I get an error message (SMffb_302.exe does not). I just tried to download an antivirus program, but my computer will not install it. Any ideas on how to solve this problem? Thanks for the help.

    Hey flipside14

    Looks like maybe it's malware

    read the information, a person found thereon in the link to mcafee communities below

    https://community.McAfee.com/thread/32823

    and follow the advice below to scan and remove malware

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If that doesn't work not in normal mode do all of the above works in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Walter, the time zone traveller

  • In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

    I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

    Hi HiteshAstan,

    one) don't you recall making any changes to the computer before this happened?

    (b) what exactly happens when you sign in to your account?  You get a specific error message?

    Step 1: Let us check if the problem persists in safe mode

    Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

     

    If the problem persists, you can deduct that the user account is corrupted

    Step 2: Create a new administrator account and then try to repair your user account

     

    Create-a-user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    After the back if you have any questions

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Pavilion p6310y/deskjet 1000: solution Wizard file sp68201.exe does not install

    HP solution Wizard file sp68210.exe does not install

    Hmmm, do you mean HP Support Assistant and SP68201.exe? As download it here:

    http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html#.VLdP_VLQNaQ

    .. .or here:

    http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

    Whatever it is, if your computer meets the minimum system requirements and that you have trouble to install, you can download the MS file in a folder on your computer, right click and select run as administrator.

    Make sure that you uninstall the older versions from your computer. Also... If you have the version of the HP software on your computer, you open the HP Recovery Manager and go to the reinstallation of software to install.

  • Have just formatted HP Simplesave because it is full of garbage now .exe does not open

    Help please with HP Simplesave. Formatted the drive because it was full of garbage. Launcher.exe does not open. Said device drive Manager works correctly. What bad past and how? Thank you

    Reinstall the appropriate HP software

    http://hpsupport.wdc.com/hpsupport/product/download.asp?

  • Explorer.exe does not after...

    Explorer.exe does not respond after I click 2 mouse on a mouse icon 2 on windows media player and press one of the tasks, it gives an error:

    Signature of the problem:
    Problem event name: BEX
    Application name: explorer.exe
    Application version: 6.1.7600.16450
    Application timestamp: 4aeba271
    Fault Module name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 00000000
    Exception code: c0000005
    Exception data: 00000008
    The system version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    How can I solve this problem? Tried sfc/scannow

    Hi, the following DLL is blocking your Explorer:

    Image path:CTFtoolMenu.dll C:\Windows\System32\
    Image name: CTFtoolMenu.dll
    Timestamp: Sun Oct 03 08:46:47 2010

    STACK_TEXT:
    WARNING: Frame IP not in any known module. Sequence of images may be wrong.
    000dcf74 046016f4 048186a 0 00000000 ffffffff 0 x 0
    000de158 75e4a39e 00000000 03a165e8 CTFtoolMenu 003cd6ec + 0x16f4
    000de174 75e49a29 003cd6ec 03a165e8 00000000 shell32! IShellExtInit_Initialize + 0x2f
    000de314 75e498e9 03abced0 03a165e8 00000003 shell32! HDXA_QueryContextMenu + 0 x 235
    000de3b8 760697d 8 04809ab0 000d013f 00000000 shell32! CDefFolderMenu::QueryContextMenu + 0 x 414
    000de6d4 7606c 509 04809ab0 00000019 00020490 shell32! CDefView::_DoContextMenuPopup + 0 x 195
    000de704 7611f7db 037dfd9c 000de750 01f20019 shell32! CDefView::OnSelectionContextMenu + 0x6a
    000de75c 7606214a 001cd02c 000de770 037dfcf0 shell32! CListViewHost::ShowContextMenu + 0x18b
    000de77c 76062a 97 01f20019 01f20019 037dfcf0 shell32! CDefView::_DoContextMenu + 0x5a
    000de7ac 75e3c5ae 01f20019 037dfcf0 00060694 shell32! CDefView::_OnContextMenu + 0xa8

    You use this tool?

    http://endlessparadigm.com/Forum/showthread.php?TID=23481

    Update or delete.

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Maybe you are looking for