cell data cable is not recognized

Similar Questions

• Canon LBP 2900 B: USB cable is not recognized by Setup on Windows 7

  The USB is not recognized by the Installer before once. I was in windows 7 and downloaded the drivers from the official Canon Web site, so I've upgraded to windows 10 but a few reasons that I rolled back to windows 7 but now the printer driver is lost so I decided to reinstall. I've seen a lot of discussions on this and in this respect Canon website but nothing works at all. Here we are with an image where the device and printers can detect the Cannon printer but the installation program can detect it at all.

  

  Also, I tried these things:

  • Reinstall the software.
  • Tried to update the existing drivers, and then restart the computer.
  • Changed the serial port.
  • Download the software again.
  • Print management > delete data...

  Help me in this please.

  Kind regards

  Siddharth.

  Hello Siddharth,

  Thanks for posting your query in Microsoft Community and appreciate your efforts to solve this issue.

  Have you tried to connect to any other USB device? Has been the result even?

  I understand that the USB device is detected by your computer, but could not install the driver and get the message "cannot recognize the USB connection. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Flex 3: property data Combobox is not recognized

  Hello

  Why is the data property Combobox is not recognized?

  I have a Simple drop-down list box, in respect of the change of the said event, a function is to be called and under this combobox.data doesn't think?

  <? XML version = "1.0" encoding = "utf-8"? >

  "< mx:Application xmlns:mx ="http://www.adobe.com/2006/mxml"layout ="absolute">"

  < mx:Array id = "myarray" >
  < mx:String > One < / mx:String >
  < mx:String > two < / mx:String >
  < mx:String > 3 < / mx:String >
  < / mx:Array >

  < mx:Script >

  <! [CDATA]
  Import mx.controls.Alert;
  
  public void label1_creationCompleteHandler(event:Event):void
  {
  
  if(MyComboBox.Data>1)
  {
  Alert.Show ('Hi');
  mycombobox.setStyle('backgroundColor','#137EC2');
  }
  }
  
  []] >
  < / mx:Script >
  < mx:ComboBox id = "Mazonedelistederoulante" dataProvider = "{myarray}" creationComplete = "label1_creationCompleteHandler (event)" >
  < / mx:ComboBox >
  < / mx:Application >
  

  Hi Kiran,

  You should not use the property data in this context. IT, real goal comes in the image when you work / are using itemRenderers and itemEditors.

  More on the if(mycombobox.data>1) of the condition will be satisfied not why because your mycombobox.data is equal to the null value and therefore the condition fails.

  data

  property

  data:Object[read-write]

  The data property allows you to pass a value to the component when you use it in an item converter or editor element. You use data binding to bind a field of the data property for a property of this element.

  The ComboBox control use it listData property and the data property as follows. If the ComboBox in a DataGrid control, it expects the dataField property of the column to map to a property in sets of data and selectedItem to this property. If the ComboBox control is in a list control, it is expected that the labelField of the list to map to a property in sets of data and selectedItem to this property. Otherwise, it sets selectedItem to the data itself.

  You do not set this property in MXML.

  This property can be used as the source for data binding.

  Thank you

  Jean Claude

• try to migrate data from a macbook pro to another using thunderbolt cable.  Cable is not recognized, why?

  replace a 3 years old macbook pro with a new - try to migrate data using thunderbolt cable.  When the cable is plugged into laptops, its not known how to fix this?

  The two Macs have a Thunderbolt port?  The old Mac may have a mini displayport that is used for video only, but accepts a Thunderbolt since video Jack mini displayport is a subset of Thunderbolt.

  In addition, you use a bolt of lightning and not a cable mini displayport? They look alike at first sight, but Thunderbolt should have an icon of lightning on each card.

  Also, if you look in System profiler

  OS X: about system information and System Profiler - Apple Support

  under lightning shows as being connected?

• Windows 7 printer and HP1120c using gigaware usb, a parallel printer cable is not recognized by plug-and-play

  I can't get my printer recognized by plug-and-play.  I have installed a printer manually, but still can not get to work.  All boards

  Hello Kirk,

  I'm not sure what you mean by "manually installed", but you need a print driver for the printer recognized by Windows. Go to this page to download the driver you need for whatever version of Windows you have: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=14497&locale=en_US&taskId=135&prodSeriesId=25522&prodTypeId=18972&lang=en&cc=us .

  Once you have downloaded the right print driver, I let the computer do the installation.  NOTE: you may need to completely uninstall what you've done "manually" so that the correct driver is working correctly. See the HP Web site for more information (I'd do it, but I do not know what operating system you have and its depth of Bit (32 or 64)).

  Post here if you need further instructions or assistance (be sure to include your OS and Bit depth). Let me know how you fare.

  Kind regards

  BearPup

• USB CABLE IS NOT RECOGNIZED IN MY OFFICE

  Hello

  Excuse me, why is my office is unable to recognize my printer usb cable... ?? I am using HP DESKJET INK ADVANTAGE 2010 my os is Windows 7 32 Bit... PLSS... answer...

  OK, well I think you have a problem with your computer or operating system.

• The Windows Easy Transfer of data application does not work if there are two windows of different language.

  I bought a data transfer cable and I tried to make a transfer of data from the laptop with non - English Windows XP Profesional a laptop with Windows 7 Home via WINDOWS EASY TRANSFER viz English.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer
  but I was surprised that I got a message "that a different language to the windows version has been so that data transfer can not live there. And above all, there was a message "that the data cable has not been detected."
  Microsoft is working with so many language versions, then why this simple problem is not solve upward? It cannot be too big problem to compensate for a versatile application that would work on all versions of Windows.

  No, it doesn't work of course between the various language versions, has never and will never be.  Will not be fixed either, because Windows XP is in the extended now support (only security patches issued) and becomes entirely non supported in about a year.  Save and move documents using a different method.

• I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

  My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

  I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

  Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

• Foreign key constraint, not recognized during the synchronization of data with the model dictionary

  Hello

  Data Modeler is a foreign key constraints do not recognize when synchronizing data with the model dictionary, although the foreign key is there (in the database that a data dictionary is read). I can't find any criterion when a foreign key is not recognized by the Data Modeler. Are there limits to the length of the attribute, or the number of columns in a foreign key, or other limitations which may lead to this behavior not to recognize a fk by Data Modeler? I have columns more than 32 characters. I compared with the fk is recognized by DM, but I can't find anything that indicates why it is not recognized.

  I wonder if someone also has constraints of foreign keys that are not recognized in the comparison of data bases and model?

  Thank you

  Robert

  Hi Robert,.

  Thanks for the comments, I logged a bug.

  Philippe

• ORA-01821: date format not recognized when you use the format TSH:TZM model

  Hi all

  Running on the Oracle 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production database

  I guess I am missing something here... but the following SQL code raises the exception ORA-01821.

  SELECT to_char(CAST(to_timestamp(SYSDATE) AS TIMESTAMP WITH LOCAL TIME ZONE),'YYYY-MM-DD"T"HH24:MI:SSTZH:TZM') as date_updated FROM DUAL;
  

  ORA-01821: date format not recognized

  01821 00000 - "date format not recognized".

  * Cause:

  * Action:

  If I change the model of TZDS or TZR time zone format... This works.

  SELECT to_char(CAST(to_timestamp(SYSDATE) AS TIMESTAMP WITH LOCAL TIME ZONE),'YYYY-MM-DD"T"HH24:MI:SSTZD') as date_updated FROM DUAL;
  

  2013-09 - 04T 13: 24:16EDT

  I need to format a date in a date in the correct format with time zone for an Atom (RFC3339) feed

  for example. 2013-09 - 04T 14: 11:09 - 05:00

  I do not know why the TZH:TZM triggers the error...

  Database NLS settings have anything to do with it?

  NLS_TIME_FORMAT = HH.MI. SSXFF AM

  NLS_TIMESTAMP_FORMAT = DD-MON-RR HH.MI. SSXFF AM

  NLS_TIME_TZ_FORMAT = HH.MI. SSXFF AM TZR

  NLS_TIMESTAMP_TZ_FORMAT = DD-MON-RR HH.MI. SSXFF AM TZR

  Thanks for the help

  If you want to change the display format, can you use to_char with the expected format

  SELECT to_char (TO_TIMESTAMP_TZ (to_char (sysdate,' YYYY-MM-DD HH), "YYYY-MM-DD HH:MI:SSTZH:TZM"), "YYYY-MM-DD"T"HH:MI:SSTZH:TZM") t1d FROM DUAL;

• ORA-01821: date format not recognized in PL/SQL report - 4.0

  Hello
  
  
  I use Apex 4.0 and I have a classic report (return of function application) which allows you to select a date column.
  The query runs in the background and gives the result.
  
  But when I run the report on the page, I get the error

   report error:
  ORA-20001: Error fetching column value: ORA-01821: date format not recognized

  The values for the column are like this 14-MAR-13, 01-FEB-13, etc... Everything seems to be good.
  
  But I don't know why this error occurs.
  
  Thank you
  Adkins

  Divya says:

  Yes, this is a database column, and the data type is Date.

  The I used to convert the format is to_date(inv_date,'dd-mm-yy').

  My format of the Date of the application is "DD-MON-YYYY '.

  If the column type is date, then DO NOT use to_date. To format the date, either use the format column (which is strongly recommended) or to_char mask in the query:

  to_char(inv_date, 'dd-mm-yy')
  

  It is not recommended the use of the 2-digit year formats.

• Date value error ORA-01821: date format not recognized

  Hi team,
  
  will be running the query below, I'm getting ORA-01821: date format not recognized
  

  SELECT DISTINCT  to_date(TO_CHAR(csactivated,'DDMONRR'||'24:00:00'),'DD-MON-RR hh24:mi:ss') FROM CUSTOMER_ALL

  and I use the 10g version and I checked the NLS_SESSION_PARAMETERS. IE NLS_TIMESTAMP_FORMAT (DD-MON-RR HH.MI. SSXFF AM)

  ALTER SESSION SET NLS_TIMESTAMP_FORMAT ='DDMONRR HH:MI:SS AM';
  
  SELECT TO_DATE (TO_CHAR (TO_CHAR (SYSDATE, 'DDMONRR') || ' 14:00:00'),
                  'DD-MON-YY HH24:MI:SS')
    FROM DUAL;
  
  output : - 8/17/2012 2:00:00 PM
  

  See you soon,.
  Manik

• ORA-01821: date format not recognized

  Hi all
  
  Can you help me debug this error please. It drives me crazy :(
  
  
  update inventory set decomission_date = August 19, 11 ' where ID = 100;
  *
  ERROR on line 1:
  ORA-01821: date format not recognized
  ORA-06512: at "SC. AUDIT_PKG", line 29
  ORA-06512: at "SC. AUD_INVENTORY", line 39
  ORA-04088: error during execution of trigger 'SC. AUD_INVENTORY'
  
  
  ORA-06512: at "SC. AUDIT_PKG", line 29 is:
  

          insert into audit_tbl values
          ( sysdate, nvl( v( 'app_user' ), user ), upper(l_tname), upper(l_cname),
            to_char( l_old, 'dd-mon-yyyy hh24:mi:ss' ),
            to_char( l_new, 'dd-mon-yyyy hh23:mi:ss' ), l_id );

  SQL> desc audit_tbl
   Name                                      Null?    Type
   ----------------------------------------- -------- ---------------
  
   TIMESTAMP                                          DATE
   WHO                                                VARCHAR2(30)
   TNAME                                              VARCHAR2(30)
   CNAME                                              VARCHAR2(30)
   OLD                                                VARCHAR2(2000)
   NEW                                                VARCHAR2(2000)
   ID                                                 NUMBER

  ORA-06512: at "SC. AUD_MDC_INVENTORY", line 39 is:
  

   audit_pkg.check_val( 'INVENTORY', 'DECOMISSION_DATE', :new.DECOMISSION_DATE, :old.DECOMISSION_DATE, :old.id );

  What are the causes the incorrect date format pleaseeeeeeeeee...
  
  
  Thank you very much.

  TO_CHAR (l_new, 'hh23:mi:ss of mon-dd-yyyy'), l_id);

  Looks like a simple typo - code a CM23 instead of HH24!

• XPS 8700 Fax / Data modem not recognized after mode 'sleep'

  I have an internal modem installed pci-e.  After the system goes into sleep mode, the modem is not recognized.  Resolution is to draw the pci-e card, restart the system, then stop again, re - install the Fax/data modem and it is recognized, until the system goes into sleep or stop mode.

  How can I keep the device recognition, didn't have to pull on the map and re-insert/install whenever I start?

  When I look at the Device Manager after the mode standby or shutdown, the device will display hidden and not connected to the system.

  System BIOS is updated to the current 10 A

  Always include the version of Windows in your messages.

  You may need to change sleep settings and possibly disable hybrid sleep by using the Windows power options, and/or adjust the power options in the BIOS Setup.

• U2312HM monitor is not recognized by my computer, when you use the USB cable

  I have a Dell XPS L702X running on Windows 7 Professional.  When I connect it to my Dell U2312HM monitor (using the USB cable), does not recognize it at all.  My monitor has a mistake about it, saying: now the VGA cable.  When I try to select the input Source, USB isn't even an option.  I tried to change the ports on my laptop, reboot with the connected monitor, making sure that all the cables are properly inserted.  Nothing seems to work.  Any help would be great.

  Thanks in advance,

  Daniel

  Daniel_hicks1,

  You've lost me. You try to send a laptop computer VIDEO signal in the monitor through a USB cable? If so, it will not work. USB upstream cable connects from the monitor to the computer to activate the USB ports monitor downstream. To get the video from the laptop to the display, you must connect the VGA, DVI or DP of the monitor cable to the laptop.