Similar Questions

• Select the cell & Excel sheet

  I currently have hundreds of files that have 3 excel sheets.  Some files have been saved with the first worksheet open, others when the second sheet is open and some when the third sheet is open.  When one of these files is automatically opened it opens to the sheet that was displayed when it was last saved. I need to write a LabVIEW program which opens each of these files, formatting, makes sure that a1 is selected cell in each leaf and make you the first sheet is open when it is saved, so that it opens with the first sheet showing.  I'm new to ActiveX, but I already understood the formatting, and I do the formatting in worksheets 3.  I just can't understand how to choose which cell is selected and which sheet is displayed. Thanks for the help, Jeremy

  Try the attached VI.   It was adapted from:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/60

  I had to change the content of the cell on the worksheet that is desired to keep this sheet on top when recording.  You could probably just change an attribute (font size, etc.) if it is not desirable to change the contents of the cell.

  Note: the name of the journal that is selected on the front panel is the sheet that will be on the top of the opening.

• The strength of two cells of different sheets of the same value

  Hello world

  I have a spreadsheet with multiple sheets, I want to add some features to.

  At the present time, I have a cell that refers to a cell in a different sheet, so if I changed the value of the cell on sheet 2, it will update on sheet 1. But I had to update the cell directly on sheet 1, it would not be updated on sheet 2.

  I want to have it set up so that if I changed the value to 1 or 2 of the worksheet, the cell is updated in both places. AKA, it forces the two cells to be always the same, regardless of the cell is edited to make the change.

  Is this possible in number? My language is clear? Any comment is appreciated. Thanks in advance!

  -Sean

  The fundamental problem is that a cell of numbers can contain a value or a formula, but not both at the same time.  So when you enter a value in a cell, the value you enter will overwrite any formula or a value that was already there.  So I don't think that what you want to do is possible by using formulas.

  It is possible using AppleScript, but probably isn't worth it.

  Can you explain a little more why you want to do this?  There may be another way to organized the document, you don't need this.

  SG

• Change the cell referenced in the formula of numbers

  I have a cell in the worksheet 2 (e.g. E1) I want to access a value contained in an adjacent cell (eg.  A1), then use this value to change the value of the cell that is in a cell in sheet 1,.

  The simple formula would be: = Sheet 1::Table 1::D3

  But I want the selected line in the D column is controlled by a value which will change.

  for example if it is a 3 in the cell, then it displays the value found in cell D3 in sheet 1.

  If it finds a 4, then it displays the value found in cell D4 of sheet 1,

  and so on.

  Hi Ron,

  I think you're looking INDEX(). Here is an example

  

  If your tables have unique names, you don't have to specify the sheet. I put the two tables on the same sheet for clarity.

  Quinn

• Synchronization of the cells through arrays - (cell) <>- (B-cells)

  How can I synchronize the cells on sheets, tables or spreadsheets even so that I can change A cell and it updates the B cells or I change cell B and it changes a cell?

  Let's say you want to cell B to update every time you change has.

  Click b, type = to bring up the formula editor, click in the cell, press 'return '.

  SG

• search function is named in a reference cell sheet

  I need make the SEARCH function in another SPREADSHEET which LEAF-NAME is in another CELL.   The INDIRECT function does not work, so I have to manually enter the SHEET NAME.

  In the picture below - I currently have to enter the name of the journal '' 2016-04 in Fx LOOKUP, but I prefer variable names of the cells B20 C20, D20 etc, reference sheet instead of having to change Fx LOOKUP for each sheet.

  

  Each month, I add a new datasheet with a new name and I can not just copy the search for Fx in a new column and refer to the form again without having to edit the NAME of the WORKSHEET.

  What Miss me.  The RESEARCH of Fx don't just use a simple cell to "B20" instead of 2016 ' reference - 04'!

  Hi Scoopster,

  "What I'm missing.  "The Fx RESEARCH don't just use a simple cell to"B20"instead of 2016 ' reference - 04'!"

  Go numbers > Preferences > General

  Uncheck the appropriate box.

  INDIRECT aid formula

  

  Picture on the right is a copy of the one on the second sheet. The formula references columns A and D of the original of this picture.

  B9: SEARCH ($A9, INDIRECT (B $ 3 & ": table 1: $A", addr-style), INDIRECT (B $ 3 & ": table 1: $D", addr-style))

  Adjust the cell references to match your tables.

  Kind regards

  Barry

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• HOW 'to LOCK"or close CERTAIN CELLS... and not the overall sheet

  "ROS" with Safari 9.0.1 and OS X EL Capitan 10.11.1

  I would like to "bolt" of certain cells, new should not be changed... and not the entire sheet...

  Possible or not?

  How?

  Thanks for help

  gymsclos

  You can lock an entire table, but not to individual cells in a table.  An effective way to organize your document would be to enter data in a table that is unlocked and have results of the calculations in a separate table that you lock to prevent accidental changes. You can have several tables on a single sheet.

  SG

• Read the contents of a cell in an Excel sheet

  Hello

  In an Excel file, I have several sheets in one leaves (for example: Dispersion) I have a cell that is located in column 3 and line 5, this cell contains a value (for example, 500). So since a VI, how can I read the contents of this cell pour out the value 500?

  If I only have a map I can USE the function 'Reading worksheet File.vi' Pour lire into a txt format file, but here I have an Excel file with multiple sheets in there, how can I read a cell in a spreadsheet says? Thank you for your lighting. Good week end to you all.

  Hello, the privilege of this take a look on.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3409

• Sheet excellent 'text data' missing in imported cells of a link.

  I hope I'm explaining this correctly. Here it goes:

  I have an Excel workbook that has a large amount of data, calculation of many different things. Due to the size of the data, there is not a skillful means to highlight all the data of the particular journal in the InDesign document.

  What I have done, is I created another (Sheet2) sheet in Excel and have completed the Sheet2 worksheet via functions - as in I've seized the '=' sign in a selected cell to Sheet2 and then returned in Sheet1, selected the appropriate cell data I want to show in Sheet2 and press ENTER. Excel then takes me back to Sheet2 showing me everything that was in the cell of data on Sheet1. It's pretty basic things. This method works.

  My question is, when you place the Excel sheet (Sheet2) in InDesign in a linked file, comes from all the data that are based on text in the blank InDesign document. All data that are focused on the digitally appear fine.

  What is a math problem? As in, the formula used in the sheet Sheet2 "= ABC" to get the text of "Sheet1" data, is not reading text of the 'ABC' but rather of Fx = A * B * C and tries to solve a math problem? And because he can't make sense the formula it do not put anything in? Is there something I have to put in, after the sign '='? I tried "= text (subject!" B87)"and, but I still get empty cells when you import into InDesign.

  Please save me.

  This is not the behavior, I expect to see, but in fact you're right:

  • In certain circumstances, the Excel data is erased from the field and a blank cell appears at the place when you put Excel data into InDesign.

  By default, InDesign will import data into a table not formatted Excel, and if this parameter is used in fact I see the text disappear cells as you see.

  A workaround for the problem solution:

  • Choose file > place, select Show Import Options, click Select file and click Open
  • In the Microsoft Excel Import Options dialog box, choose two tables: formatting once only, or a Table: table updated in the form in the section formatting.
  • Click OK.

  In this case, the text appears in the table cells in the tests that I made.

  CARI

• Formatting of cells in a table html with XSL style sheet

  HI gentlemen,
  
  Given an XML instance and a style sheet (the relevant passages are here). It should look like the following:
  
  Column 1: General interest, OK
  Column 2: Two entrances, placed in the first and fifth row in the cell, not OK
  Column 3: Two entrances, placed in the first and fifth row in the cell, not OK
  Column 4: Four + three entries, each in a different line, OK
  
  IE7 made instead, place the entries in column 2 in the line 4 and 5. It's confusing, because there is a hierarchical relationship between the columns (2, 3) and column 4.
  
  Can someone help me by looking at the two programs? It should be simple enough, however, I can't find info how to format.
  
  Thanks, best regards
  
  Miklós HERBOLY
  
  -----------------------------
  The XML file:

      <scheinarten_liste V="1">                                                                                             
        <scheinart V="23" S="1.2.276.0.76.5.235" SV="1.03">  
       <scheinuntergruppen_liste V="1">
         <scheinuntergruppe V="20" S="1.2.276.0.76.3.1.1.5.1.19" SV="1.03"/>
         <scheinuntergruppe V="21" S="1.2.276.0.76.3.1.1.5.1.19" SV="1.03"/>
         <scheinuntergruppe V="23" S="1.2.276.0.76.3.1.1.5.1.19" SV="1.03"/>
         <scheinuntergruppe V="24" S="1.2.276.0.76.3.1.1.5.1.19" SV="1.03"/>
       </scheinuntergruppen_liste>
        </scheinart>                                                          
        <scheinart V="42" S="1.2.276.0.76.5.235" SV="1.03">  
       <scheinuntergruppen_liste V="0">
         <scheinuntergruppe V="41" S="1.2.276.0.76.3.1.1.5.1.19" SV="1.03"/>
         <scheinuntergruppe V="42" S="1.2.276.0.76.3.1.1.5.1.19" SV="1.03"/>
         <scheinuntergruppe V="43" S="1.2.276.0.76.3.1.1.5.1.19" SV="1.03"/>
       </scheinuntergruppen_liste>
        </scheinart>                                                          
      </scheinarten_liste>                                                                                            

  --------------------------
  The XSL stylesheet:

        <!-- Scheinarten-Liste -->
        <table border="1">
          <caption>Scheinarten-Liste</caption>
          <tr>
            <th><xsl:text>Scheinarten zulässig?</xsl:text></th>
            <th><xsl:text>Scheinart</xsl:text></th>
            <th><xsl:text>Scheinuntergruppen zulässig?</xsl:text></th>
            <th><xsl:text>Scheinuntergruppe</xsl:text></th>
          </tr>
  
          <xsl:for-each select="pe:bedingung/pe:scheinarten_liste">
         <tr>
              <td><xsl:value-of select="@V"/></td>
           <td>
                <xsl:for-each select="pe:scheinart">
                  <xsl:value-of select="@V"/><br/>
             </xsl:for-each>
           </td>
           <td>
             <xsl:for-each select="pe:scheinart/pe:scheinuntergruppen_liste">
                  <xsl:value-of select="@V"/><br/>
             </xsl:for-each>
            </td>
           <td>
             <xsl:for-each select="pe:scheinart/pe:scheinuntergruppen_liste/pe:scheinuntergruppe">
                  <xsl:value-of select="@V"/><br/>
             </xsl:for-each>
           </td>  
         </tr>
       </xsl:for-each>
        </table>
        <br/>

  Hello

  IE7 made instead, place the entries in column 2 in the line 4 and 5. It's confusing, because there is a hierarchical relationship between the columns (2, 3) and column 4.

  It is not related to IE in particular.
  By summing the values of brother independently, relationship with parents is lost, so you can't wait for 'magic' the poster correctly HTML rendering engine.

  A solution would be to display each value in a separate cell (TD element), but it's a little tricky.

  Here is an example:

  XML document:

  StyleSheet:

  
  
    
    
      
        
        
          
              
              
  
              
                
                
  
                
                  
                  
  
                  
                    
                        
                          
                            
  
            
  Scheinarten-Liste
            
  
              
  Scheinarten zulässig?
              
  Scheinart
              
  Scheinuntergruppen zulässig?
              
  Scheinuntergruppe
            
  
            
  
                      
  
                          
                          
  
                        
                        
  
                      
                      
  
                    
                  
                
              
            
          
        
      
    
  
  

  Result:

  
   
    
  
     
  Scheinarten-Liste
     
  
      
  Scheinarten zulässig?
      
  Scheinart
      
  Scheinuntergruppen zulässig?
      
  Scheinuntergruppe
     
     
  
      
  1
      
  23
      
  1
      
  20
     
     
  
      
  21
     
     
  
      
  23
     
     
  
      
  24
     
     
  
      
  42
      
  0
      
  41
     
     
  
      
  42
     
     
  
      
  43
     
    
   
  
  

  Have you also considered using an unordered list (UL/LI Elementshtml)?
  It would be much easier to make the hierarchical structure of data.

• pop-up menu that refers to cells in one table on another sheet

  Hello

  I would like to know if it is possible to set the items in a context menu so that it selects elements in a specific column on another sheet.

  more precisely:

  I have a recipe ingredient table and a table of the inventory on another sheet.

  I wish I could choose in a drop-down menu any item of inventory, including later additions to it.

  

  I want to select the product here in a list that would be directly consult the table below (on another sheet)

  

  Thank you very much for the help.

  Best regards

  YLWT

  I'm not sure that the numbers support this directly. It really works in Excel.

  Try these links for assistance:

  How to create a drop in numbers?

  https://www.Quora.com/How-do-you-create-a-dynamic-dropdown-list-in-Apple-numbers

• Cells in consecutive sheets may include the following line in a master spreadsheet

  Hello. I have a master sheet of orders for that customer. I want to build another spreadsheet "invoice" for each line of this master worksheet. Is anyway to do (except manually by selecting the required master line as I build each sheet)?

  Thank you

  Without specific details (including screenshots), it will be difficult to answer.  Figures has functions that can get data using various methods.

  Indirect(), offspring, Lookup(), vlookup() and hlookup() are functions that can help you

• How to set default cell format 'text' instead of 'general' sheet in excel using pl/sql code?

  Can someone please help me on how to generate excel file using pl/sql? I have generated csv files successfully, but now I need to generate a excel. I changed the code generation of the csv file, but the file gives me error when opening:

  "The file you are trying to open,"XXXX.xls", is in a different format than specified by the file extension. Do you want to open it now? »

  If I choose Yes then open the excel file, but it excludes the leading 0 in the front for one my column. How do I configure excel type default column as text rather than General, when you create the files? I also tried to generate excel file using xml. But I do not know how to set the type of column there, too. I'm using Oracle 11.2.0.3.0 and APEX 4.2.6.00.03. I'll call all these codes apex.

  Code1 is used:

  Declare

  output_header varchar2 (4000);

  fichier_en_sortie VARCHAR2 (255);

  Varchar2 (2) EOL: = Chr (13) | Chr (10);

  BEGIN

  output_header: = 'tls_tracking_id ' | Chr (9) | ' fnn_ext' | Chr (9) | "path_id' | EOL;

  fichier_en_sortie: = 'report_excel' |'. XLS;

  owa_util.mime_header ("application/octet ', false");

  HTP.p ('Content-Disposition: attachment; filename = "" | ") fichier_en_sortie |' « ') ;

  owa_util.http_header_close;

  HTP. PRN (output_header);

  for r in)

  Select tls_tracking_id, fnn_ext, DWD_DTOV_OUT_VW path_id

  where nbn_loc_id = 'LOC000138413115. '

  The order of tls_tracking_id LOOP)

  HTP. PRN (r.tls_tracking_id

  || Chr (9) | r.fnn_ext

  || Chr (9) | r.path_id

  || EOL

  );

  END LOOP;

  END;

  Code2 used :

  create or replace PACKAGE BODY IS pkg_excel_export

  PROCEDURE excel_open (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = ' <? XML version = "1.0" encoding = "ISO-8859-9"? > ' | Chr (10) |

  "< workbook xmlns =" "urn: schemas-microsoft - com:office:spreadsheet" ' | "

  Chr (10) |

  ""xmlns:o ="urn: schemas-microsoft-com ' ' |

  Chr (10) |

  "xmlns: x =" "urn: schemas-microsoft-com: excel" ' | "

  Chr (10) |

  ""xmlns:ss ="urn: schemas-microsoft - com:office:spreadsheet" ' |

  Chr (10) |

                          'xmlns:html=" http://www.w3.org/TR/REC-html40 ">' ||

  Chr (10) |

  ' < ExcelWorkbook xmlns = "urn: schemas-microsoft-com: excel" > ' |

  Chr (10) | ' < WindowHeight > 8580 < / WindowHeight > ' |

  Chr (10) | ' < WindowWidth > 15180 < / WindowWidth > ' | Chr (10) |

  ' < WindowTopX > 120 < / WindowTopX > ' | Chr (10) |

  ' < WindowTopY > 45 < / WindowTopY > ' | Chr (10) |

  ' < ProtectStructure > false < / ProtectStructure > ' | Chr (10) |

  ' < ProtectWindows > false < / ProtectWindows > ' | Chr (10) |

  ' < / ExcelWorkbook > ' | Chr (10) | "< Styles > | Chr (10) |

  '< ss:ID of style = 'Default' ss:Name 'Normal' = >' | Chr (10) |

  "< ss:Vertical alignment = 'Bottom' / >" | " Chr (10) |

  ' < borders / > '. Chr (10) | ' < police / > '. Chr (10) |

  ' < Interior / > '. Chr (10) | ' < NumberFormat / > '. Chr (10) |

  ' < protection / > '. Chr (10) | "< / style > | Chr (10) |

  '< ss:ID of style 's22' = >' | Chr (10) |

  "< x: font family = ss"Swiss":"BOLD"="1"ss:Underline ="Single"/ >" | "

  Chr (10) | "< / style > | Chr (10) | "< / style >";

  END excel_open;

  PROCEDURE excel_close (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = l_xml_body | ' < / workbook > ';

  END excel_close;

  / * Opens a worksheet in the Excel file. , You can open multiple worksheets. **/

  PROCEDURE worksheet_open

  (

  l_xml_body IN OUT NOCOPY CLOB,

  p_worksheetname in VARCHAR2

  ) IS

  BEGIN

  --

  -Create the worksheet

  --

  l_xml_body: = l_xml_body | "' < worksheet ss:Name = ' ' | p_worksheetname |

  "" > < table > ";"

  END worksheet_open;

  / *Farm the worksheet in the Excel file.   **/

  PROCEDURE worksheet_close (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = l_xml_body | ' < / table > < / worksheet > ';

  END worksheet_close;

  / *Opens the tag line * /

  PROCEDURE row_open (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = l_xml_body | "< row >."

  END row_open;

  / *Farm the tag line * /.

  PROCEDURE row_close (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = l_xml_body | "< / row > | Chr (10);

  END row_close;

  / *After the opening of the line, we can write something the first cell* /

  PROCEDURE cell_write

  (

  l_xml_body IN OUT NOCOPY CLOB,

  p_content in VARCHAR2

  ) IS

  BEGIN

  l_xml_body: = l_xml_body | ' < cell > < data ss:Type = "String" > ' |

  p_content | ' < / data > < / cell > ';

  END cell_write;

  / * If you use this package of APEX, you get to download the excel file. **/

  PROCEDURE excel_get

  (

  l_xml_body IN OUT NOCOPY CLOB,

  p_filename in VARCHAR2

  ) IS

  XX BLOB;

  make the NUMBER;

  This NUMBER;

  BC NUMBER.

  LC NUMBER;

  w NUMBER;

  BEGIN

  DBMS_LOB.CREATETEMPORARY (xx, TRUE);

  make: = 1;

  so: = 1;

  BC: = dbms_lob.default_csid;

  LC: = dbms_lob.default_lang_ctx;

  w: = dbms_lob.no_warning;

  DBMS_LOB.converttoblob (xx,

  l_xml_body,

  DBMS_LOB.lobmaxsize,

  do,

  Thus,.

  British Colombia,

  LC,

  (w);

  owa_util.mime_header ("application/octet ', FALSE");

  -set the size so that the browser knows how to download

  HTP.p ("Content-length: ' |") DBMS_LOB.GetLength (xx));

  -the name of the file will be used by the browser if users only one save as

  HTP.p ('Content-Disposition: attachment; filename = "" | ") p_filename |

  '.xls ' | '"');

  -close the headers

  owa_util.http_header_close;

  -Download the BLOB

  wpg_docload.download_file (XX);

  END excel_get;

  END pkg_excel_export;

  I know it's a bit long code, but to better understand please consider...

  Thank you.

  I did worked putting just one extra line in my l_xml_body in the XML (Code 2 used). Now my excel generates with cells type 'Text' and there are no left falling to zero. Also the columns display not scientific format as 2.3D + 12. Current recording shows without default formatting.

  '

• Writes the value to a specific cell in Excel sheet using ActiveX in LabVIEW

  
  

  Shaz,

  You open a single reference to a worksheet and then at the same time, you have several instances of "close Reference.vi' racing to close the same reference.  As soon as an instance closes the reference the rest of the code is broken.