Cell vs at & T or Verison

Similar Questions

• Function numbers for dynamically on average over the last 30 cells

  I am a trader and I have several months of data. I currently have a percentage of the sum of all the victories and defeats by currency pair. I want to create a function that retrieves the last 30 cells of data and creates a percentage I can compare it to the percentage of total victory.

  The cells are empty, unless I have add data in either to the upper or lower row. 1 win and - 1 are losses. 0 means not configured.

  Here's a full month with 20 data cells (cells max per month are 22) of trading days:

  

  This is the current month:

  

  I have 16 months of data with percentages of victory for all my data. As you see, I also have winning monthly winning percentages easily in the examples above (with a small division). I really, really want to compile data from the last 30 cells with data to create a winning percentage. It would be necessary to sometimes include 3 different lines of different months of data to create 30 cells with a number inside.

  A friend used the COUNTIF command but I do not have it works for me.

  If there is a different website to request this detail of the question please share that too.

  Thanks in advance,

  B

  Hi Braddon,

  It would be a pretty easy task if the data to be summed up in two columns from a single table and had no gaps, but that doesn't seem to be the case.

  Screenshots of two isolated sets of cells containing two rows (railway of) the data to be summarized, but give no indication where these data will be found in the document does not provide sufficient information to start to find a solution.

  Where are the data stored? You say "data for each month." "Every month" is recorded on another table?... on a pair of rows of the same table different?

  In the image (very vague) I, the factors of complications will gather data from a subset of continually changing several tables on multiple sheets and which specific cell contains the 30 most recent reference and is the one to start the harvest.

  While a few details and clarifications.

  Kind regards

  Barry

• The AppleScript get cell numbers active

  I want to create a script that checks the active cell or column better / assets to the keyboard layout for the automatic switch from English to Korea and visa versa...

  I can't find it anywhere... where to get the active column? Help, please!

  AppleScript to affect the current selection (if the selection is a single cell, an entire column or some other range) is as follows:

  say application "Numbers".

  say front worksheet active document

  say ( class is worn) fromfirst table whose selection range

  say a selection range

  -do things here, for example:

  -the value of background color "red".

  -value of the first cell value v

  end say

  end say

  end say

  end say

  However, from keyboard, I don't know why you should check the specific range in number.  You may want to watch v (value in, say, the first cell) to check if it is in Korean or in another language?

  SG

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• Numbers: The mobile cell formula

  

  This may work for you:

  

  E2 = if (value (D2) > 0, C2−D2, ' ')

  It's abbreviation dethrone select cell E2 and then type (or copy and paste it here) the formula:

  = IF (value (D2) > 0, C2−D2, ' ')

  Select cell E2, copy

  Select cells E2 at the end of column E, block

  F2 = SIERREUR (IF (AND (E2 = "", E1 > 0), C2 + CEILING (SUM($E$1:E1) ÷ (ROWS (D) −COUNTA (D)), 1), ' '), ' ')

  Select cell F2, copy

  Select cell F2 at the end of column F, dough

• Automate the cells of the filter to another table based on two columns

  Hello

  What I'm trying to do is: filter multiple cells to a new table. In this example, I want that all students (column 'lidnr', 'city', then the first 7 columns) with 1 teacher in the 'First' column to be copied into the table 'teacher 1'. The same goes for students per 1 teacher in the column "second". I know it can be done with the help of the filter and the copy paste, but I would like to know if this can be automated, because there are many more tables in my actual document.

  

  

  I've been using maybe to think the search formula but he can't give me more than one result, the result must be unique.

  Thank you very much for your help.

  Kind regards

  Kim

  Hi Kim,

  The usual way to do this is to add an index for each table for which column the data is to be copied.

  Here is an example of preliminary. Improvements after return from the light of day.

  

  Triangles of error on the last row of T1 are thanks to the formula out of data to search for. Easily fixed.

  Order of the names is different from your example, which is grouped by day numbers. Build lists in the desired order, rethinking the index calculations.

  Course index calculations use the formula below, entered in Table 1::L2 and thre to the rest of the blue full cells filled.

  L2: = IF (OR (RIGHT($H2,1) = RIGHT (L$ 1.1) RIGHT($J2,1) = RIGHT (L$ 1.1)), MAX(L$1:L1) + 1"," ")

  Data recovery on the Table T1 is well done by the following formula, entered in A2 and down and B2 and filled and down-filled.

  A2: = INDEX (array 1::A, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  B2: = INDEX (array 1::B, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  More tomorrow (actually, later today).

• "No cell coverage" not listed in the use of the battery

  During the audit of the use of the battery parameters, on an iPad 2 Air, WiFi and cellular, upgrade 10.0.2, 'No cell coverage' is listed and uses a lot of battery percentage. This never happened since the purchase of the iPad two years ago. I've recently updated to iOS 10.0.2 and T-Mobile as the cellular carrier. This occurs when the two Wi - Fi AND cellular data are turned off. I barely use the cell service as it is, first of all just use wifi, and I never leave the cellular data connection on when you do not. I noticed a few days ago a T-Mobile "Carrier Update" has been pushed to the iPad. Someone else with the same situation?

  Hi there, stumped127! Thank you for using communities of support from Apple!

  Use of your iPad 2 Air indicates that it is looking for service even if you have data Wi - Fi and cell phone turned off after update to iOS 10.0.2. Given that mobile data is off, it shouldn't have an impact on the battery and I will be happy to help you with this. Be sure to test after each numbered step.

  How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a fresh backup. It is preferable "to have" one to the 'need' to a backup.

  1. forcing a nearby app on your iPhone, iPad or iPod touch - first, quit all running applications, and then restart your iPhone, iPad or iPod touch - never underestimate the power of a good restart.

  2. reset the iPad settings - do not forget to write your networks, Wi-Fi/passwords before you start. On your iPad, go to settings > general > reset > reset all settings. This step returns your iPad to factory default settings. Test and if that solves the problem, use your backup to restore your settings.

  Take care!

• GroupMe &amp; data cell

  Yesterday, I turned off cellular data for all my apps (in order to test the use of data lost). It is minimal, so I'm not worried about it. I went home and was on wifi, no problem there. Coming to work this morning (not), I suddenly get 8 new messages GroupMe pop up on my screen. I open the application and the messages are not visible and the Apple message on the screen says "cellular data are turned OFF...". "- you know that screen. Anyone... check Notifications fall down, they don't there are not listed and I can't find the message 8. So I turned my cell on GroupMe, and 8 messages are now present.

  OK, getting to my question... Why do I have this morning of 8 new messages notifications when my settings for cell usage has been disabled? Notifications and cell phones two completely different things, I need to be turn off, or should cell not dominate all the other settings regarding the use of the data?

  iPhone SE Version 9.3.4 (don't tell me an update will fix this!) "I hate that answer!)

  Thanks in advance!

  Not work the data boxes

• Return all column names of the cells that match a value in a single cell

  

  I want to be able to scan all the cells in column 1 in column 3 (there could be several) which belong to the same line and check if they all have a value y (X). If they have no value, I want all columns to display all the names of the matching columns as follows: "column 1, column 2" for Elemento.

  This can be a good start:

  

  B2 = if (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')

  It's shorthand dethrone select cell C2, then type (or copy and paste it here) the formula:

  = IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')

  Select cell B2, copy

  Select the cells B2 the bottom of column D, dough

  To add additional columns, you copy the atomic unit:

  & IF (COUNTA (D2) > 0', '& D$ 1,' ')

  and update D2 with the new column and D$ 1 with the new column.

  then... If you add a new column (G, for example) that you want to change it:

  and IF (COUNTA (D2) > 0', '&D$1,' ')

  TO

  and IF (COUNTA (G2) > 0', "&G$1," ")

  and the updated formula would be:

  = IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', ' & F$ 1,"") & IF (COUNTA (G2) > 0', '& G$ 1,' ')

  fill down like before

• iMessage is no longer with cell phone

  Hello

  Since a few days I have problems sending an iMessage using cellular data. Messages don't just send and the message app eventually uses normal text messages.

  However, when my phone using Wi-Fi, the problem does not occur and the iMessages are sent.

  I tried the things:

  • Switch to airplane mode
  • Verify access to internet (works)
  • Reset
  • Turn iMessage and turn it on again + signing back with iCloud account
  • Audit of iMessage
  • Sign out of the account for the entire phone iCloud, restart and log in again.
  • Toggle Dataroaming
  • Toggle WiFi help

  Phone info:

  iPhone 5 s - iOS 9.3.5

  Country: Belgium

  Hello

  Check your cell settings and make sure that they are turned on. Tap Settings > cellular data > WE

  Make sure you have no carrier updates Meanwhile on your iPhone.

  Remove the SIM card and then reinsert back after 10 seconds.

  Finally, you can try to reset your network settings on your iPhone and then give it a try. Tap Settings > general > reset network settings. Once the device is reset, check and see if your cellular service for the iPhone is back on

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• Use of data cell after the upgrade to iOS 10.0.2 has increased dramatically

  Hello:

  I noticed a HUGE increase in mobile data usage by my phone (iPhone 6s) after the iOS to 10.0.2 update.    I had not changed anything since before the update.  A few days after my phone iOS update my more than double to 15 days prior to the cell data update!   I went under a GB to 2.2 GB for two days.  I am only allowed 2.5 GB of my company.   Assist of WiFi was interrupted. I am connected to a wifi most of the time, all day at the office and at home in the morning and in the evening.  I haven't changed my phone usage habits nor have I down loaded new applications.   I also did all the stuff reset once I downloaded the update as turning on and off, hold down home and appears on the sides until that little Apple.

  I looked in the cell parameters section and noticed a few things that consume more data:

  Facebook: I had disabled cell Facebook use.   However, there was a large amount of data used. I also, by habit, only check Facebook when I'm at a known wifi spot as the House or the office.   It was less than a MB before and near a GB of data in 2 days.

  YouTube: Idem, had turned off cell phones and only look at the House.

  Maps - never used but the use of data.

  e-mail-HUGE amount of data used.  Normal use for me. in the past, the amount of data has been a MB.  Now it's 65 MG in 2 days,

  Siri - I do not use Siri as in "Hey Siri" or by using voice commands.  I use it from time to time to the voice on texts.

  AccuWeather.  Even.

  It's just as much as the apps that I use, the rest is electronic mail and stuff systems.   I uninstalled nearly all applications except for the few that I need as my ticket train and planning aps and mail want to stop this.   I won't send any imessages anymore.

  Quite an experience of something like that?

  Yes! I have iPhone 6 - after that the update almost all my data is gone for the month! I do not have Wifi Assist on and I only use data when I'm home and can connect to Wifi!

  I see my iPhone to connect to my Wifi then bounce to the cellular network. I have no problem with my home wifi network. This problem also occurs in the work. In addition, the network at work requires the password to the network - I type in iPhone tells me it's the wrong password, and then it connects. Then it disconnects after 2 minutes.

  I tried to reset the Wifi feature. Help!

• Links between cells

  Without script process is possible or likely to be possible in the future to link [read the value of a cell] in another file of numbers [with a different file name] to a cell in the open numbers file.

  1. it is not possible with any version of numbers up to 3.x. I am not aware that this is possible in v4.

  2. anyone Koe whtehter or not, it will be possible in a future version of numbers will be bound by a confidentiality agreement and will be unable to provide a means of information either. Apple does not, in general, future features or products.

  Kind regards

  Barry

• iPhone cell reception Sat 7 problem

  I was driving around and noticed my cell reception and gps would be drop out completely for a while.  I have an iphone with verizon 7.  I noticed problems in areas I've never had a problem with my old 6 s.

  Sometimes the LTE would drop to 3G and I would like to have it in airplane mode to return to LTE.

  I wonder if its a design problem of antenna or a software problem that must be addressed in an update.

  Hello

  The steps detailed here can help:

  If you cannot connect to a cellular network or cellular data - Apple Support

• Numbers - how to import external data to a cell in a single file into a new cell in another file?

  Numbers - how to import external data to a cell in a single file into a new cell in another file?

  I want to do the same thing in numbers (3.6.2 (2577) I used to do in Excel (any version):)

  to import a calculation of a cell in a file in a new cell in another file.

  Example: I want to import the result of a sum in a specific cell of my accountant in August to a cell in comparison in my accounting of September.

  It was so easy in Excel. Until the reference computer broke down.

  By the numbers, I tried to copy - paste the contents of the cell formulated, but not good.

  No help manual online or anywhere. I think that maybe the function is absent in number.

  Then I return to MicroSoft Excel, that I have used for many years and I am sorry to say feel much more wysiwyg.

  Formulas in a numbers document cannot reference cells in other documents of numbers.

  "Much more wysiwyg" is another way to express what many of those who "used (MS Excel) for many years" expressed as "more intuitive. These two descriptions usually boil up to ' what I'm used to, ", which is also true in the other sense.

  Whatever the real explanation, the standard advice is "the tool that will do the job." If "the job" requires referencing values in a separate document, the numbers (alone and without the help of AppleScript) are not the best tool for this job.

  Kind regards

  Barry