Center came
I can't find my game, I know it's in the settings but I want it on my home screen, how can I do this?
I saw that it said here in the forums that the Game Center has been replaced by "In - App" Game Center for every game
Tags: iPhone
Similar Questions
-
Tuner problems with vista Media Center
So my tuner for windows media center came down. Windows provides that it is a problem of compatibility. Can't seem to find the driver for ViXS PureTV - U1 4882 anywhere, at least one that will install properly have had this problem before. After doing a restore, it seemed to solve the problem, however, this time above restoration doesn't seem to work properly either. So if someone can lead me to a work, compatible version of the driver for vista or have a solution I can use for this problem I would be very happy.
Problem well solved... For all those who may have the same problem (and I know that my initial description of it was poorly written) tuner not installed via Windows Media Center using Vista 64-bit. Also brings up a PCI device newly diagnosed with an inability to install the driver suitable for the start. The problem has been solved for me by cracking open the case by removing then replacing the tuner in the same slot. To restart it I guest is no longer with the newly found hardware and the tuner seems to have fixed itself.
-
Windows Security Center indicates microsoft security essential is off but it shows that it is on
My windows Security Center came saying virus etc is at risk and microsoft security essentials is off. It's on and said that he protects? Please notify.
In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse
-
Problems to Windows Media Center on my computer
So in the computer that I have, the Media Center came with the computer and everything. Recently, I had a computer problem where my computer was stuck in a reboot cycle. It was fixed and now my computer works very well, but since they had to change the essential to a secondary antibody motivation and get a new drive, much of my stuff is still in the secondary drive (i). In any case, now Media Center is not there at all, and I was wondering if there is a way to do it because most of the default help revolves around already have it in your computer, which I did not. So if someone could give me help or advice, it would be greatly appreciated. And if you need more information on my computer so please ask.
Thank you!
No - there is no way to install Media Center, short installation like what it is: an operating system. It is not an installable application.
I need to inject a few words of warning at this point: because you could not suppy him with your drives and he has (apparently) is not MCE2k5 media available to him... you have the back of two things:
1. really, really broken BONES (if he used an XP Pro disk and your product key - MCE2k5 CD1 IS actually XP Pro; the key indicates the installation program to be the bits of the CD2. If CD2 is not provided upon request; Windows will be major, major problems. But, it'll show in system as a Media Center Edition properties);
2 - a lot of XP Pro licensed copy (if it has installed with an XP Pro disk and used a key he had "hang out".)A repair guy that is really worthy of its name would have put appropriate media at its disposal (I know I do...)
Because it does not, my suggestions are as follows:
1. find a person who does not have good press;
2. contact your PC vendor, to see if they can still provide (or sell) you filtering alternatives;
3 - If you bought the PC from a smaller provider (or a system integrator) who is no longer in business, you can order filtering alternatives of here:
https://OM.one.Microsoft.com/OPA/validation.aspx?storeid=b19f4ce9-dfcb-44e4-9abe-1c9dfbad47d0&LocaleCode=en-us&JavaScriptOn=Yes
I think they'll charge you $20 for the disks (if available).(BTW: I assume that it's Media Center 2005 that was installed?) MCE2k4, however, was quite similar that the fis would be the same - reinstall with the correct version of Windows.)
HTH,
ChrisMS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
OfficeJet pro 8500 Wireless: 140.0.18.23 HP Solution Center
I can't get the Solution Center to download completely when you install the driver for the HP pro 8500 office jet. I downloaded the complete solution several times (and deleted several times). Sometimes the solution Center rises but then said incomplete download, re - install. This means that I have no way of scanning the computer, none of these options are there. This has happened before on a previous PC and after re-installed, the option to configure the solution center came and I could create shortcut and use. Not so this time after 8 attempts over a month period 3 my PC recognizes the printer and I can print a document without wire. Help!
Hello @beckyg1!
Thanks for posting on the HP Forums!
I should be able to help on the Solution Center do not install it on your computer. The first thing I recommend is to uninstall the HP software. I understand that you have installed several times, but once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you should restart the computer and download/run this update: HP Software Update Utility located under Update (1). Once the update has been completed, re - install the HP software.
To uninstall the HP software, click here: uninstall the HP software
To perform a disk cleanup, click here: perform a disk cleanup
To download the HP software, click here: HP Officejet Pro Full Feature Software and Driver
If you please, after back and let me know how everything goes
-
Designjet 5000 + HP solutions Center
Hello
I have a HP designjet 5000 42 "printer that is installed on my network.
I have the juice has a HP officejet 4500 and it is setup on the network.
Of course the HP Solution Center came with the Officejet 4500.
Is it possible to add the designjet to the solution Center. I tried "add a device" using the cd but it is not displayed.
Any ideas?
HP Solution Center does not support the Designjet printers. What specific capacity are you looking for?
For the Designjet you can have better results, post in the forum HP Designjet here.
-
CTS1300 - 3 cameras, but we want to use only 1
We have a CTS1300 in a small room, we want only the Center camera to work, is there a way to disable the other two cameras? We have tried to unplug the cables from the cameras but which cause its malfunction, also we plugged only Center on the box pickups to try had the power of the camera.
Any ideas?
Not sure if this will work, but you could try factory reset of the device, leave the cables disconnected that you have now, remove the unit of CUCM, add again as a CTS-1000?
Also I don't remember exactly how a CTS-1300 is connected, but is there an ACU between the codec and the cameras + microphones? If so, try bypassing it and plug the camera + microphone directly into the codec when you perform the procedure described above.
-
Recommendation of tutorial and software for streaming video?
iMac OSX Yosemite here is the problem:
I work in a school and managing the "writing Center" in the library. I need a camera pointed at the writing Center cameras which broadcasts streaming to a Web page. Teachers will be able to click a bookmark to see the web stream, or a jpg "intervalometer" every 1 minute or so, to see if there are useful volunteers available to help their students. Or to see that he's too busy.
I have a good camera, webcam 2 IPEVO P2V.
I need a whole tutorial instruction newby explains an inexpensive way to do it.
I'm pretty sure that Quicktime Pro or Gawker (open source and free) for this. I know that Adobe ($$$) such software. Because I'm a teacher, I prefer free.
Gawker (free) is old, but I know he can do interval jpg screenshots, and I think he can do streaming video to a folder or an ftp address.
Can you suggest a good Web page which, step by step, tell me what software I need and how to configure the page?
Have you tried YouTube?
-
HP Pavilion h9-1180 several monitor - how to set up?
Hello
I just opened my office and I'm setting up. I'm setting up multiple monitors, but that a single monitor is picked up. There are 1 socket DVI works, which covers the 2 which had on them and they do not seem to work. I downloaded the driver and Catalyst Control Center came, but does not seem to pick up the second monitor.
What Miss me?
Thank you!
Ryan
Here are the specifications of your monitor LCD HP s2031's. This monitor has DVI - D (digital) and inputs (analog) VGA. Here's the Cintiq21UX user manual. According to the user manual, the Cintiq21UX has a DVI - I cable seal and comes with a DVI - D adapter cable and a VGA adapter cable.
Given that both monitors support DVI - D and VGA and the computer supports the DisplayPort, HDMI, DVI - D and VGA (via an adapter DVI / VGA), there are a number of ways to connect to the computer for the monitors. For better clarity of video output, you must connect a monitor (my suggestion is the Cintiq21UX) using the other monitor (HP S2031) using an HDMI-DVI and DVI adapter / cable or a DisplayPort-DVI adapter/cable.
-
X 1 carbon 2014 windows 7 hangs after the main power connection
Nice day
After the Polish Lenovo call center refuses to help me ask you to help. For about a week now, my X 1 carbon 2014 hangs after connection to the power supply. It's so irritating. I think, I only installed the updates regular windows 7 and the update of the BIOS via the lenovo update tool.
The Polish Lenovo Support Center came with the excellent range of system solution. I really hope that you would be able to help more effectively at the same time.
Thank you!
Pawel
-
After a clean install can I still get updates
I came to the conclusion that I have to do a clean install and the company for the model mark I finally sent the operating system after 4 years now that I have (xp media center) came with sp2... but some how the jerk who took an illegal copy of xp pro also had put sp3 here... so when I do this may reinstall the sp3 from the ms site or I have to keep sp2 here until I can get a new copy of windows?
And can I still get all the updates I've missed for the years spent 1 1/2?
COPY of http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/93602a125bd8e133
See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c* HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install) *.
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspxMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need help, please start a new thread in this forum:
http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
This is going to be a bit long, I hope that the details could shed some light on my problem. I have problems with the commissioning games. Whenever a game gets to a point where it begins to display 3d graphics, my system hangs. I have searched in many forums and found similar problems, but none of the fixes worked for me.
First of all, I am under 4G of RAM, Intel Pentium D processor, as well to 3.00 GHz and a Nvidia GeForce 8800 GT.
A little background first of all. I played World of Warcraft on my pc for a few years now. Back in August, I fell prey to a fairly widespread worldofraids.com keylogger that took advantage of a vulnerability in the Flash Player. My account has been compromised, but restored by Blizzard. I cleaned the files infected my computer off manually, as AVG did not catch them and installed Kaspersky, who caught a few others that I had missed.
Over the next few months, I noticed decreases the performance of my pc. I would get about 35 fps in a fight against a boss, 15 3 next, after that, then on a picture by six seconds. Some of the members of my Guild suggested overheating, but another guildie told that my file has been flooded by debris from the keylogger. He gave me a list of programs to run (malwarebytes, smitfraudfix and ccleaner, among others). I followed his instructions, cleaned the infected nearly 200 registry keys and appeared for the raiding of next week without any problems (I even overcame damage for several fights counters).
Our raid week finished, and in the meantime I played torchlight through steam upward all night before our next raid day. When I logged in the next night, my graphics glitched descent and I was unable to play. The screen would Pixelize, the sound would start stuttering, and I got a bsod. The bsod's happened twice and every other time the pc could just lock or to restart. I thought that this could be a problem with WoW, so I loaded with torches and got the same problem.
My minidumps for the time, I actually got BSOD said being faulty nvidia drivers. I took my roommate's video card and put it in my pc and was able to connect to WoW without crashing, but my sound is released (Windows said it was due to an audio conflict). I put my card in the pc of a friend, and he ran wow without problem. I tried to update my drivers but also to roll back to the older drivers to no effect.
I carried out stress tests on my system and the memory passes, my cpu goes, virtually everything up to the gpu, which still crashes my pc without indicating why exactly. The motherboard seems in good condition, with no bulge or leak capacitors.
In my reading similar incidents, I thought that I might have some residual registry problems so I bought Windows 7 (as XP Media Center came pre-loaded on my pc) and a custom settled 64-bit, spares nothing. I downloaded the new drivers for everything and even updated the BIOS for my motherboard. I reinstalled WoW and it still crashes.
By raising the specs on my card, I noticed that it requires a minimum 400W power supply. Mine was 300W, although she had worked for more than a year without problem. Might think that any change in my settings fan or similar
be just enough power to defeat of drawing, I ordered a new power supply 550W. After replacing it, I fell again. I was able to connect only once for about 10 minutes after replacing the power supply, but the next time I tried to connect (several hours after turning off my pc) it crashes immediately.I did not get a bsod since the first couple of times, so I don't have the minidumps for access. I have disabled the automatic restart, but which causes just my system hang when I crash and I have to turn off manually.
A couple of things more I noticed that may be linked: when I run WoW since the pitcher, usually the screen would go black temporarily and then proceed to the login screen. Since the problems started, in that brief moment where the screen goes black, it flashes a white text on the screen in a view type BACK. I was not able to read as it happens so fast, but he mentions shading and some other graphics settings. It's a short list of articles, about 10-15 lines.
In addition, from time to time at my computer at idle (not in mode "standby", usually when I'm playing my 360) I hear the speakers make a pop sound, similar to when you turn on the. I checked what could be a short circuit by touching the case, but everything seems to be fine. Electrical installation in my apartment is a little older, but I use my pc, monitor and speakers through an inverter.
I am quite at a loss what to do now, other than trying to replace my motherboard. If anyone has any suggestions, I'd be happy to try. Sorry it was a bit on the long side. Thanks in advance.
Hi digimicah,
Thank you for using Microsoft Windows forum.
To troubleshoot BSOD, start your computer in Mode safe and check:
Here's how:
1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
2 select Safe Mode when the Windows Advanced Options menu is displayed and press ENTER
If it works with Safe Mode, you can choose to run the clean boot.
You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
Follow the steps below to put your computer in a clean boot state:
Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
1. sign the computer by using an account with administrator rights.
2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
5. click OK and then click on restart.
Check the link to learn more about the clean boot below:
http://support.Microsoft.com/kb/929135
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click the Start button, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart.
Looks like there is a problem with the display drivers.
As the posts above mention, the problem comes from your drivers. BSOD crashes are usually caused by bad drivers (manufacturer's code). With Windows 7 being again your manufacturer is not fully functional drivers.
Unfortunately, when this is the case there is little Microsoft can do that the problem is with the provider code. I suggest you knock it down on their support lines (send your incident information) and tell them that you found accidents as a result of their hardware and drivers - they should open the relevant support for you tickets.What you can try to:
1. update all the drivers (sound card, graphics card, etc...)
2. try to disable caching
3. try to disable virtualization
4. try to use the onboard sound with the updated driversMake sure you have the latest chipset drivers installed with the latest BIOS.
WARNING OF THE BIOS:
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
I also suggest you to download and install the latest drivers updated.
How to upgrade a hardware driver that is not working properly:http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properlyAlso check out this link for more information on how to fix blue screen errors:
http://support.Microsoft.com/kb/958233
If none of this works, try reducing to 2 GB of RAM.
If your Board has 3 or 4 locations, use only 1 and 2 housing
See also:
http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ab43493b-247C-427e-BA21-4950eea279achttp://social.answers.microsoft.com/Forums/en-US/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/ for the black screen problem.
To torubleshooting game question follow:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problemsHope this has helped
Kind regards
Aziz Nadeem - Microsoft Support -
Computer will not receive Comcast Digital adapter (DTA) receiving TV signal
Until recently I had used a tuner for my computer (and Media Center of course) to access all cable channels I ordered via Comcast. In other words, until Comcast made the switch to digital, which means I need a decoder adapter digital transport (DTA). After the switch, and before that I'm the DTA, I was able to receive broadcast TV channels, but not basic cable (for evidence, I was able to record a show on a channel on my DVR).
I got one of the Commission yesterday and followed the instructions to a T. Among these non-tamponnage my cable output directly from the computer and to the contrary put through the DTA, then a coaxial cable linking DTA to the computer. Unfortunately, Media Center told me that I had no signal TV at all (and therefore that I couldn't even check how worked the DTA). Comcast technicians told me that the box has been activated and it worked, so the problem is probably the communication between the Commission and my PC. The PC is not received the signal from the DTA, and I have no idea why.
Some features:
Windows XP 2002 OS, running on PC Gateway GM5066E, Media Center came with the machine (purchased in 2006/2007 or most), built in TV tuner, I have all the equipment/remotes...just IR no TV signal
Any help you could give would be great!
According to my instructions, the IR blaster NOT plug on the back of the DTA.
The only thing that plugged into the back of the DTA is the COAXIAL cable from the wall and
the power adapter cable. and you do NOT use the cable/IR extension which has been
provided with the DTA. See point #5.
You may need to buy a cable blaster if it did not come with the gateway.is that what you have:
http://support.gateway.com/s/Accessor/104220/104220mv.shtml ?
Sticky end cable blaster must be glued on her go to the DTA,
covering the eye of the receiver. the other end should be connected to the foregoing
accessory that must be plugged into a USB port.
Still, you can't use the IR blaster extender cable supplied with the DTA and
nothing branch at the rear of the DTA, other than the coaxial cable and power supply.On Friday, August 6, 2010 16:52:39 + 0000, jtaberle wrote:
The make and model of computer are in the first post (gateway GM5066E running XP 2002). I use the WMC remote supplied with the computer. As I said, it works fine except for changing the channel (interaction with the DTA).
Through the slit in the IR, I mean plug it into the back of the DTA to the IR receiver (NOT the IR USB receiver that I use, the piece that came with the DTA).
Barb Bowman
-
Number of unknown member during an attempt to propertyMap
In my application, I have a main.qml that has a TabbedPane.
The 2nd part is the LeadInformation.qml page, which has a NavigationPane manipulated a several page questionnaire.
From the first page, I have a menu option that pushes a page of BarcodeScan.qml to scan the barcode. When data is read, I want to fill in the fields on the LeadInformation.qml.
I added a function in the ApplicationUI to analyze the data of barcode.
When the data are analyzed, I try to use the propertyMap update fields on the page.
QmlDocument *qml = QmlDocument::create("asset:///LeadInformation.qml"); QDeclarativePropertyMap* propertyMap = new QDeclarativePropertyMap; propertyMap->insert("iFirstName", data.mid(m_startSpot, m_endSpot - m_startSpot)); qml->setContextProperty("propertyMap", propertyMap);And in the LeadInformation.qml page
TextField { id: tfLeadFirstName hintText: "Lead First Name" input.submitKey: SubmitKey.None text: propertyMap.iFirstName; }In the qml page, I get one! symbol and 'unknown member '.
I guess I need to declare something somewhere else to make it work. Examples are to change the values in the main.qml page. I have not seen an example to change values on another page.
This is what worked.
Instead of calling to a source of the page, I just added the Page as an object.
In the main.qml, I added the NavigationPane (LeadInformation.qml)
import bb.cascades 1.0 import bb.system 1.0 TabbedPane { id: mainTabPane showTabsOnActionBar: true property bool databaseOpen: false tabs: [ Tab { title: qsTr("User List") imageSource: "asset:///icons/ic_view_list.png" PageBase { databaseOpen: mainTabPane.databaseOpen page: "LeadsList.qml" } }, Tab { title: qsTr("Add User") imageSource: "asset:///icons/AddSubscription.png" LeadInformation { } } ] }In the Navigation pane, which contains all of the fields that fills in the barcode data, I added the BarcodeScan page in the ComponentDefinition for action that calls the bar code
import bb.cascades 1.0 import bb.system 1.0 NavigationPane { id: navigationPane property string barcodeOutput; property int currentLeadID; onCreationCompleted: { _app.setLastLeadID(0); } Page { id: leadsInformation titleBar: TitleBar { // Localized text with the dynamic translation and locale updates support title: qsTr("Lead Information") + Retranslate.onLocaleOrLanguageChanged appearance: TitleBarAppearance.Branded; } ScrollView { scrollViewProperties.scrollMode: ScrollMode.Vertical Container { layoutProperties: FlowListLayoutProperties {} clipContentToBounds: false Picker { id: pkEmployee title: "Bell and Howell Employee" kind: PickerKind.Expandable rootIndexPath: [] dataModel: XmlDataModel { id: dmEmployees source: "xml/employees.xml" } pickerItemComponents: [ PickerItemComponent { type: "employee" content: Container { Label { text: pickerItemData.email } } } ] onSelectedValueChanging: { console.debug("selectedIndex = " + selectedIndex(0)) var selectedEmployee = dataModel.data([0, selectedIndex(0)]) console.debug("selectedEmployee 0,0 email = " + selectedEmployee.email) lbEmployee.text = selectedEmployee.email } onSelectedValueChanged: { console.debug("selectedIndex = " + selectedIndex(0)) var selectedEmployee = dataModel.data([0, selectedIndex(0)]) console.debug("selectedEmployee 0,0 email = " + selectedEmployee.email) lbEmployee.text = selectedEmployee.email if(lbEmployee.text.length > 2 && lbSelectedShow.text.length > 2) { if(aiNextButton.enabled == false) { aiNextButton.enabled = true } } } } Label { id: lbEmployee textStyle.fontStyle: FontStyle.Italic textStyle.fontWeight: FontWeight.Bold } Picker { id: pkShow title: "Show" kind: PickerKind.Expandable rootIndexPath: [] dataModel: XmlDataModel { source: "xml/show.xml" } pickerItemComponents: [ PickerItemComponent { type: "show" content: Container { Label { text: pickerItemData.name } } } ] onSelectedValueChanging: { console.debug("selectedIndex = " + selectedIndex(0)) var selectedShow = dataModel.data([0, selectedIndex(0)]) console.debug("selectedShow 0,0 name = " + selectedShow.name) lbSelectedShow.text = selectedShow.name } onSelectedValueChanged: { console.debug("selectedIndex = " + selectedIndex(0)) var selectedShow = dataModel.data([0, selectedIndex(0)]) console.debug("selectedShow 0,0 name = " + selectedShow.name) lbSelectedShow.text = selectedShow.name if(lbEmployee.text.length > 2 && lbSelectedShow.text.length > 2) { if(aiNextButton.enabled == false) { aiNextButton.enabled = true } } } } Label { id: lbSelectedShow textStyle.fontStyle: FontStyle.Italic textStyle.fontWeight: FontWeight.Bold } Header { title: "Lead Information" } TextField { id: tfLeadFirstName hintText: "Lead First Name" input.submitKey: SubmitKey.None } TextField { id: tfLeadLastName hintText: "Lead Last Name" input.submitKey: SubmitKey.None } Header { title: "Company Information" } TextField { id: tfCompanyName hintText: "Company Name" input.submitKey: SubmitKey.None } TextField { id: tfJobTitle hintText: "Job Title" input.submitKey: SubmitKey.None } TextField { id: tfAddrLine1 hintText: "Address Line 1" input.submitKey: SubmitKey.None } TextField { id: tfAddrLine2 hintText: "Address Line 2" input.submitKey: SubmitKey.None } TextField { id: tfCity hintText: "City" input.submitKey: SubmitKey.None } TextField { id: tfStateRegion hintText: "State / Region" input.submitKey: SubmitKey.None } TextField { id: tfCountry hintText: "Country" input.submitKey: SubmitKey.None } TextField { id: tfPostalCode hintText: "PostalCode" input.submitKey: SubmitKey.None } Header { title: "Contact Information" } TextField { id: tfPhone hintText: "Phone" inputMode: TextFieldInputMode.PhoneNumber input.submitKey: SubmitKey.None } TextField { id: tfPhoneExt hintText: "Phone Extension" input.submitKey: SubmitKey.None } TextField { id: tfFax hintText: "Fax" inputMode: TextFieldInputMode.PhoneNumber input.submitKey: SubmitKey.None } TextField { id: tfEmail hintText: "eMail" inputMode: TextFieldInputMode.EmailAddress input.submitKey: SubmitKey.None } } } actions: [ ActionItem { id: aiNextButton enabled: false title: qsTr("Purchasing Timeframe") + Retranslate.onLocaleOrLanguageChanged ActionBar.placement: ActionBarPlacement.OnBar imageSource: "asset:///icons/ic_next.png" onTriggered: { currentLeadID = _app.getLastLeadID(); if(currentLeadID == 0) { // Create new Sales Leads _app.createLeadRecord( tfLeadFirstName.text, tfLeadLastName.text, tfCompanyName.text, tfJobTitle.text, tfAddrLine1.text, tfAddrLine2.text, tfCity.text, tfStateRegion.text, tfCountry.text, tfPostalCode.text, tfEmail.text, tfPhone.text, tfPhoneExt.text, tfFax.text, lbEmployee.text, lbSelectedShow.text); console.debug("New Sales Lead - Create") } else { // Update current Sales Lead _app.updateLeadRecord( currentLeadID, tfLeadFirstName.text, tfLeadLastName.text, tfCompanyName.text, tfJobTitle.text, tfAddrLine1.text, tfAddrLine2.text, tfCity.text, tfStateRegion.text, tfCountry.text, tfPostalCode.text, tfEmail.text, tfPhone.text, tfPhoneExt.text, tfFax.text, lbEmployee.text, lbSelectedShow.text); console.debug("Existing Sales Lead - Update Sales Lead ID: " + currentLeadID) } _app.readLeadRecords(); // Refresh the list view. _marketingWS.insertSalesLead(1); //navigationPane.push(purchasingTimeframeDefinition.createObject()); } }, ActionItem { id: aiScanButton enabled: true title: qsTr("Scan Barcode") + Retranslate.onLocaleOrLanguageChanged ActionBar.placement: ActionBarPlacement.InOverflow imageSource: "asset:///icons/ic_scan_barcode.png" onTriggered: { navigationPane.push(barcodeScanDefinition.createObject()) } } ] attachedObjects: [ // Definition of the second Page, used to dynamically create the Page above. ComponentDefinition { id: purchasingTimeframeDefinition source: "PurchasingTimeframe.qml" }, ComponentDefinition { id: barcodeScanDefinition BarcodeScan { } } ] } onPopTransitionEnded: { // Destroy the popped Page once the back transition has ended. page.destroy(); } backButtonsVisible: false }Then, on the page BarcodeScan.qml, I just referenced the fields and added to the white list. Instead of calling C++ code to analyze the data, I just analyzed it on the page. QString provides a better string manager that the regular chain, so it's not as clean as I wanted it to be.
Page { property string decodeString property string tmpString property int initStartSpot: 0; property int startSpot: 0; property int endSpot: 0; property int x:0; property int vcard: 0 property int vcard2_1: 1 property int vcard3: 2 property int print2013: 3 property int codeType: 0 Container { id: cMain layout: StackLayout { } horizontalAlignment: HorizontalAlignment.Center verticalAlignment: VerticalAlignment.Center background: Color.create(0x9CDCF6) Container { id: cCameraReader layout: AbsoluteLayout { } background: Color.White horizontalAlignment: HorizontalAlignment.Center verticalAlignment: VerticalAlignment.Center Camera { id: camera preferredWidth: 450 preferredHeight: 450 onCameraOpened: { camera.startViewfinder(); } } BarcodeDetectorVisuals { id: bdvScanner preferredWidth: 450 preferredHeight: 450 barcodeDetector: barcodeDetector onDetected: { // Set the UserID to 0 _app.setLastLeadID(0); decodeString = data; dataArea.text = decodeString; if(decodeString.indexOf("VCARD") > 0) { if(decodeString.indexOf("VERSION:3.0") > 0) { codeType = vcard3; } else if(decodeString.indexOf("VERSION:2.1") > 0) { codeType = vcard2_1; } else { codeType = vcard; } } else { codeType = print2013; } dataArea.text += "\n " + codeType; switch(codeType) { case vcard2_1: case vcard: case vcard3: // Get Name tmpString = decodeString.substr(decodeString.indexOf("N:"), decodeString.indexOf("TITLE:")); tfLeadFirstName.text = tmpString.substr(0, tmpString.indexOf(";")); tfLeadLastName.text = tmpString.substr(tmpString.indexOf(";") + 1, tmpString.length); break; case print2013: //qDebug() << " Last End spot = " << decodeString.lastIndexOf(QString("$")); //qDebug() << " $ counts = " << decodeString.count(QString("$")); startSpot = 0; initStartSpot = decodeString.indexOf("$", startSpot + 1); for(x=0; x < 22; x++) { endSpot = decodeString.indexOf("$", startSpot + 1); dataArea.text += "\n x:" + x + " endSpot = " + endSpot; if(endSpot != -1) { switch(x) { case 0: // badge ID //qDebug() << " Badget ID = " << decodeString.substr(startSpot, endSpot - startSpot); break; case 1: // blank or Show ID //qDebug() << " Show ID = " << decodeString.substr(startSpot, endSpot - startSpot); break; case 2: // First Name tfLeadFirstName.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 3: //Last Name tfLeadLastName.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 4: //Title tfJobTitle.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 5: //Company tfCompanyName.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 6: //AddrLine1 tfAddrLine1.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 7: //AddrLine2 tfAddrLine2.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 8: //City tfCity.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 9: //StateRegion tfStateRegion.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 10: //PostalCode tfPostalCode.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 11: //Country tfCountry.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 12: //Phone tfPhone.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 13: //PhoneExt tfPhoneExt.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 14: //Fax tfFax.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 15: //LeadEmail tfEmail.text = decodeString.substr(startSpot, endSpot - startSpot); break; case 16: //RegClass //tftext = decodeString.substr(startSpot, endSpot - startSpot); break; case 17: //PrincipalBusiness //tftext = decodeString.substr(startSpot, endSpot - startSpot); break; case 18: //Primary Job Function: //tftext = decodeString.substr(startSpot, endSpot - startSpot); break; case 19: //Influence in your company's buying decision //tftext = decodeString.substr(startSpot, endSpot - startSpot); break; case 20: //Number of Employees //tftext = decodeString.substr(startSpot, endSpot - startSpot); break; case 21: //Annual Sales Volume: //tftext = decodeString.substr(startSpot, endSpot - startSpot); break; case 22: //Products you are interested in (Multiple Answer/Comma Delimited) //leadContainer.tftext = decodeString.substr(startSpot, endSpot - startSpot); break; } startSpot = endSpot + 1; } else { break; } } } navigationPane.pop(); } } } attachedObjects: [ BarcodeDetector { id: barcodeDetector formats: BarcodeFormat.Any camera: camera } ] TextArea { id:dataArea text: "" textFormat: TextFormat.Auto maximumLength: 400 } } onCreationCompleted: { if (camera.allCamerasAccessible) { camera.open(); console.debug("rear camera opened") } else { dataArea.text = "Cameras are not accessible" } } }It is the solution. This works.
Not the solution I was looking for, but I don't have the time now to try again.
My guess is that propertyMap will now also work with the way I'm treated Page calls.
-
Windows Xp SP3 IDT PC Audio problem / Dimension 9200
Hello
I get an error message
Cannot access IDT Audio from PC that seems to come from "Shanghai Development Center.
All my audio died.
Someone had this problem?
Is there a solution?
WinZip is OK, I have it and use it to unzip the files (or zip files), but I wouldn't be hard drive (zip) compression (if that's what you did) because it can cause a lot of problems and slower operation.
I have no idea what or where this 'Shanghai Development Center' came. Cannot answer.
The SigmaTel driver from Dell downloads is the only one. The range of Dimension has been abandoned at least 5 years ago and there is never anything new Dell drivers. I have a Dimension E510 (5150) at the same time.
Maybe you are looking for
-
She made no answer due to the update of the system interuppted reference satellite
during the update system was interrupted, now there is no response to all the
-
View photos and details at the same time.
I have a large photo - license of foreign car collection-, but this query could also apply to anyone who has a collection of photos. I want to be able to choose to display each picture (organized by folders as usual) - with its relevant details (for
-
Your cd/dvd-rw do this? If we are all in trouble.
My computer is a HP Pavilion a620n running Windows XP Home Edition. It came with a Lite On DVD + RW SOHW - 802S. And here lies the problem. It cannot read a dvd or cd disc but fails to write to one. Here are the steps taken by me to solve the problem
-
I have to restore Outlook data from a hard drive that was photographed. My computer is running and I'm trying to get all the emails and files I had in Outlook. Where are the files and folders stored and what are they called. They are not in 'My Docu
-
BlackBerry Smartphones download programs
Hello Is there anyway that I can use my phone to download applications like poker? I downloaded a poker app to play for fun, and I can't find the file anywhere on my phone... It is a .exe file and said it saved on the card of support, but I can't se