Center media card PCI TV Tuning problems

Similar Questions

• REUNITIALISATION CARD PCI-6624 COUNTER PROBLEM

  Hello

  I have an app with maps CAN, digital, analog and media cards. So as soon as I have my application error (error CAN or other) which forces me to stop it, I have my card PCI-6624 counters who don't get réunitialisent not and so I have the following error at the next launch of my application:

  I point out that I have this error since I updated my app (LabVIEW 8.5-online LabVIEW 2011) and plug-in DAQ 9.3.5.

  I edited my code and checked that I was doing well clear United Nations of my tasks and a reunitialisation of my media card pour itself out of my app in case error.

  I can even stop and close the application and once in MAX can't réunitialiser media cards after a crash, I always have to turn them off and turn them back on in the peripheries windows or restart my computer.

  Please inform me if you had already encountered a problem like this or help me solve this problem if you have an ideas for me.  Thank you in advance.

  Hello Jr_Marlet,

  This problem is known and has been resolved with the release of DAQmx 9.4. I therefore invite you to retrieve this version (or even 9.5) on ni.com/download.

  Feel free to get back to us if the problem persists.

  CDT,

  Eric

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Media Center Receiver service has encountered a problem and the need to close"

  "Media Center Receiver service has encountered a problem and the need to close" I had to do a Windows XP system restore since then I continue getting the error message appearing all the time. How can I disable this message?

  Hi Keith,

  What is your level of service pack?

  Let's try the following: How to configure Windows XP to start in a "clean boot" State. This could help us eliminate third-party applications that may cause a conflict.

• Media card reader problem

  The green light on my media player is constantly on, because he thinks that there is a card in there. It is causing all sorts of problems with my PC. I did search back issues with media card on the forum readers to find a solution. The closest solution to you, that I could find is below.

  http://h30434.www3.HP.com/PSG/board/message?board.ID=HardwareDPC&message.ID=5888&query.ID=211647#M58...

  I tried to put the card in and out with no luck. I restarted the PC with no luck. I tried to disable and re activate each in Device Manager. The solution to the issue I found suggested that uninstall all the different reading devices and restart. Someone at - it any other suggestions on how I should approach this issue? Any help would be greatly appreciated.

  Thank you

  jahmekyat

  Hello

  Thank you for your response. Sorry for the lack of information in my post. In fact, I have corrected the issue last night. What I did get another sd card and insert that into the card reader. Then, I went through Explorer and clicked on, safely remove and it worked. I think that the problem could be with the previous card is not removed correctly, or that the other card was causing problems for some reason any.

  Thanks again for your help,

  Bryan T

• Smartphones blackBerry media card problems

  My wife just got a Blackberry "BOLD".  We have a lot of trouble with it.

  I bought a 4GB Kingston memory card and installed.  I'm going to settings-> Options-> memory.  I have the card Support 'On '. Encryption mode 'None. ' Mass storage Mode support "on"; Auto enable mass storage Mode... 'Yes '.  Says device "a card is not currently inserted in the device.  As far as I know, he is.  Tried it out by ensuring that it is the right way (it is), take the battery, reboot etc.

  When I insert the card for the first time is any message that is supposed to appear?  Nothing has.

  Nothing wrong with the media card - I can insert into my computer and copy files to it.

  I find this very frustrating phone.  Part of the problem is we have a mac, but it should not affect the media card.  Because we have a mac, we are unable to download OS updates, right?  So I hope that this will not be part of the solution.

  Any ideas or suggestions on how to diagnose the problem or difficulty it would be very appreciated!

  Thank you!

  z

  Thanks for the replies.  He did it here.

  Unfortunately, the video link for 8830 and curve.  However, I retried card insertion and I figured out that I hadn't pushed it pretty hard.  There to snap in flush before closing the door.  Guess I was unaccustomed to the MicroSD card.  If it is inserted correctly, a message appears confirming that a multimedia card is available.

  Then go to settings-> Options-> memory.  Here you can format.  Note There are no parameters-> Options-> Media Card as other BBs.

  Once you have done so, you will find the appropriate options appear for example, when you use the camera, you can store the pictures from the camera or media card.

  Thanks again

  z

• BlackBerry Smartphones problems accessing my media card to format install repair n

  About 1 month after I had a new 4 GB media card 4 my Curve 8520 it stopped workin. I tried 2 format, fix n install but I had a guarded dat msg saying could not format or install or repair. So I tried my old 2 GB card media n I'm getin d same problem. Sum1 can you please help? What is my phone?

  OK, Sandisk is one of the best brands, so the time to start back at square one. In this case, it may well be the phone. If you're ready to try something a bit drastic, my next suggest is to reload the OS on your BlackBerry. You can do so by following the steps in the following link:

  http://supportforums.BlackBerry.com/T5/device-software-for-BlackBerry/how-to-reload-your-operating-S...

  It is possible that something like a wipe handheld might work, but that it will take just to the next step and could win you time in the long run.

• Problems of Smartphones blackBerry 8310 curve and media card

  OK here is what I am working at the moment: BB Curve 8310, PNY 2 GB MicroSD, 4.7 to the BB Desktop software and 4.5.0.110 to BB device software. I have Auto enable Mass Storage set to OFF.

  Here's the problem: yesterday I was transferring a bunch of files on my phone before going to work. The process takes more time than I expected so I click Cancel to stop the transfer. Kept, always transfer. Click on Cancel twice more, never stopped. So I unplugged the USB to the phone, went to work. At work, I check my phone, and it froze. Can't do anything. I take the battery on a couple of times, the phone will come back on, working for about one minute, then freeze. Now when I do that, it's frozen once it comes back on. Even trying to get into the desktop software, it freezes when you try to load Roxio media manager.

  I took the media card, and the phone works very well. I even transferred the data on my laptop so I wouldn't lose it and reformatted the SD EEG. the same results above. Everything is up-to-date. I wonder if it's just a problem of press card or a phone number. If I buy a new media card, everything would be fine, or will I get the same results?

  Please help me.

  I have the same problem.  I have actually became a new BB and had successfully moved the chip (even) of the old on the new 8310 8300 and looked to see that my music was still on it and accessible.  Then, I installed the BB desktop software and moved some pictures on the chip.  Then I stop office and disconnected the BB.  Then, I noticed that the BB has been frozen.  I'm not sure what the connection is between the chip and the office, but I think that if I remove the pictures from the camera, I might be able to work again.  I'll also have to check the setting of the card of support on the BB.

  If someone has already solved this problem would be great.  I was happy to have the work all.

• get the error message"Windows Media Player has encountered a problem while playing the file. "When tying to play videos on my memory card

  get the error message"Windows Media Player has encountered a problem while playing the file. "When you try to play videos on my memory card

  Hello

  1. What is the format of the video file you are trying to play?

  2. do you have any third party audio or video codec installed?

  Follow these methods.

  Method 1:  Run the troubleshooter in the Windows Media Player settings.

  Troubleshooting looking for issues related to playback of audio and video files in the drive by checking its configuration and network parameters.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:
  If you have installed any third-party codec or plug-in for Windows Media Player, uninstall them temporarily to check if they are causing the problem.

• Problem with the system of files and media card renaming of files...

  HIII guys.

  I m, development of application in which I have to rename the file to media card so I use the FileConnection API.

  but it gives me exception error in file system and the same code works fine for the files of memory device.

  I m confused abt it... Is there any setting for media card access... ???.

  code snippet

  fconn = (FileConnection) Connector.open (file:///SDCard/BlackBerry/pictures/2.jpg, Connector.READ_WRITE);
                         
             
  If (fconn.exists ())
  {
  System.out.println ("" + fconn.canRead () + fconn.canWrite ());
  fconn. Rename ("1.jpg");
  fconn. Close();
  Returns true;
  }

  fconn.canRead () returns to me true

  fconn.canWrite () returns me true.

  help me guys...

  Thanks in advance...

  JDE 4.2.1

  Device Simulator-8100

  HIII

  I finally found it...

  My mistake of not closing the files input stream each so it locks...

  Thnks for help...

• Smartphones blackBerry media card problem

  Hi, recently my son decided to use my media card in her phone to download some pictures / msic. Unfortunately, when I put the card, I could see all my music titles / lists, but no current music, I kept getting a "search" on the bottom bar. I threw on the chip and bought a new one. Now my phone tells me that there is no card inserted media (I tried taking a picture and it tells me that there is no card, he will have to register in the fon.). Even when it connects via USB, I do not receive the password prompt, so that the device is recognized, nor my PC sees the device.

  Can I guess I could have caught a virus? Can or should I reinstall the OS on the fon? If so, advice on how to do? Don't see anything in the Help menu.

  Thank you 1 million...

  Have you tried to reset your device by removing the battery?

• Problems of blackBerry Smartphones photo transfer from the memory of the device to media card.

  My BB has hundreds of photos on the device's memory, so I can't transfer, then to the PC (T Mobile "expert" told me) unless I have move to the media card. How it happened, I don't know. So, looking through this great forum I found the answer from a guy with a link to ID of Article: KB05478, I'm sorry, I couldn't find the post, but I photocopied it. Thank you, whoever you are.

  BUT there is no command 'move' on my BB, so I can't move the photos from the memory of the device to the media card.  I can, however, move them individually. Needless to say, there are 100 pictures, which will have for ages.  Is there another method?

  Thank you very much.

  P.

  Yes, this is what he means.  It is at the same time.

  The best thing to do in the future is to get a camera configuration always save the photos to the media card / media card.  The photos on the memory device, if ever, the device is corrupted or fails you will lose all your photos.

• How to change the configuration of the BIOS with NO SIGNAL - to accept the new card PCI - ex

  Compaq Presario SR2030NX

  Product #RJ036AA

  S/N {removed privacy}

  MB: ASUS A8M2N - LA

  Bought: October 2006

  OS: Windows XP Media Center 05

  New graphics card: MSI N210-D512D2 graphics card GeForce 210-512 MB, DDR2, PCI-Express 2.0 (x 16), 1 x DVI, 1 x VGA, DirectX 10.1, mono-emplacement

  New: 480w PSU

  ERROR:  NO SIGNAL on monitor and can not reset the BIOS to accept the new video card in the PCI slot

  PROBLEM: The user reports the monitor suddenly became white with blue lines finally erased.   On start-up, the screen shows "No Signal" then turns off.

  Troubleshooting has included:

  Fixing monitor with its cable to another PC - monitor work

  Fixing working monitor and cable to the PC - No Signal

  There is no boot beeps, fans, lamps, not work cable defeated, no video.   I concluded the embedded video component failed.

  Installed the new video PCI - ex card and new power supply 480w and still get NO SIGNAL.   New video card specifications called for a minimum 350w power supply.  The fan on the new video card PCI - ex works.  Search on the HP Support pages indicates that the BIOS should be modified to change the type of PCI slot type in-flight video.  Makes perfect sense to me, sounds like it might work.

  How to reset the BIOS when you do not see what you are doing?

  I have moved the jumpers to reset the CMOS, but cannot tell if it worked or not.  I tried a couple blind BIOS resets, but I could do this for months.

  If I could determine the Version of the BIOS, I might be able to blindly to reset the BIOS.  The Compaq Options of Menu and "BIOS Setup Utility information" web page provides instructions for BIOS version 6 or less and version 7 and greater - menus and access steps are very different.

  QUESTIONS:   How to determine the version of the BIOS.  Which key I hit to access the BIOS (F1, F10, esc, Del)?  Which menu I followed to reset the type of video, so how can I save and exit?

  

  Thanks for any help

  GJB

  Thank you Paul,.

  I didn't know that it was just a function of Regedit - piece of cake.

• To increase the flow of a Basler Cameralink Camera (A504K) with a capture card PCIE-1429 card

  Hello

  I use a monochrome camera of Cameralink Basler A504K-resolution 1280 x 1024 with a capture card PCIE-1429 (x 4 slots) card. The image acquisition is controlled by MAX of LabVIEW version 11.0.1. The problem is that when I try to reduce the number of lines (specifically height) 1024-32 (for example) in the window of acquisition (from MAX), the frame rate of the camera is expected to increase to almost 16, 000fps. But it does not go beyond 248fps. Can you suggest me, why is he so past, or how to increase his pace? In addition, under the image window has appeared has something like: 1 X 8-bit 1280 x 32 9 image. That 1 X means here? For your reference, I am also attaching the image of the purchase window.

  Thank you!

  Hi Római,

  Change the height of your image in MAX will not increase the rate of your acquisition - the camera always sends the same number of lines per image, you said just the software to stop their playing earlier.  The following image still occurs until the next edge FVAL.

  1 x at the bottom tells you view the image at 1 x magnification.  In MAX, you can zoom in and out, and this indicator lets you know your current zoom level.

• Error 200452 with synchronization of two cards PCI-6733

  LabVIEW: 8.6

  Using two cards PCI-6733 connected via a RTSI cable, I'm trying to get an output synchronized two PCI cards (which are connected to of BNC-2110).

  Here is the labview code I put together by looking at the examples online and in the program. To the left of the diagram is the part of the program that generates the entries.

  

  Currently, it gives me an error 200452: "specific property is not supported by the device or is not applicable to the task." Property: task of Start.TrigType name: _unnamedTask<26>. »

  Any ideas how to solve this problem? The Labview code above looks like it will do what I want?

  Thank you

  After investigating further the code, since it seems that your referencing the same clock, you do not need a trigger. You can probably avoid the error by removing the third blpck on all threads