Cf11 install problem on WIndows server 2012 R2

Similar Questions

• Flashing blue/black screen on installing the VM - Windows Server 2012 RC tools

  Hello

  I have a problem with the installation of the tools from the virtual machine to a new server RC VM Workstation v8.0.2 2012 both 8.0.3: when the graphics driver is installed the machine virtual display flashes blue and black and can not be recovered.

  Reboot safe mode allows the virtual machine to start with a working screen, where to find VM tools apparently not installed. I then had success removing the VM graphics card and from the virtual machine as usual. VM tools then displays correctly installed in the virtual machine, but there is no VM card in Device Manager.

  I tried the suggestion here (http://communities.vmware.com/message/2059062#2059062) nothing works.

  Someone at - he managed a successful VM Server 2012 RC tools installation?

  See you soon,.

  Conan.

  I had this same problem when installing Server 2012 RC x 64 on my new machine simply active and virtual 3D graphics acceleration in the preferences of the VM.  This solved my problem.

• Windows Server 2012 R2: Error 0x000000C4

  Hello

  I'm having a problem where I can not install Windows Server 2012 R2 (clean install). First: this is NOT a virtual machine. This means that I can not run the command prompt commands of anything like that. in any case, my problem is that whenever I run the Setup, Windows loads the files successfully, but then, just before the Installer starts up, I get a message saying: "your computer must restart. Press and hold the power button. "Error: 0x000000C4". The computer restarts automatically. I never had this problem with Windows Server 2012; It's just with R2 2012. I meet the hardware requirements for WS 2012 R2 so that cannot be the problem.

  Please could someone help me solve this problem. Again, this is not a virtual machine. I know that some people have overcome this problem by running commands for VirtualBox, but I obviously can't do that because I do not have an operating system installed and it isn't VirtualBox.

  Thank you very much.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• installation of windows server 2012

  I recently purchased windows server 2012, however, it came with a disc only. No instructions, nothing? How can I install on my Acer Aspire easyStore H342?

  Hello

  Thanks for posting your question in the Microsoft Community!

  After going through the description of your problem, it seems that needs clarification to install Windows Server 2012. I suggest you go through the followiong links.

  Installation of Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/jj134246

  Install and deploy Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/hh831620

  If you need assistance, I suggest you to ask your question in Windows Server 2012 TechNet Forum.

  http://TechNet.Microsoft.com/en-us/WindowsServer/hh534429

  I hope this helps!

• Blue screen of death (0x0000003b) on Windows server 2012.

  Hello! I found a problem with windows server 2012. This server runs on a VMware virtual machine, and once of the month I get this error, but the drivers can cause this error all the time different.

  For the first time this problem caused the driver AgileVpn.sys, second and third time win32k.sys. And the last pilot time named videoprt.sys caused this problem.

  I spent a lot of time to search for a patch. But I have not found a necessary updates in Windows server 2012 r1 for this problem.

  Maybe give me a little help or tell me what I need to do?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Question: How can I format Ubuntu 10.10 on my machine for the installation of Windows Server 2012

  My machine is installed with Ubuntu 10.10 and together as a web server for a few months.

  Now, I need to totally remove the Ubuntu and install the large Windows Server 2012 RC.

  Easy steps?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not

  Hello

  I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I select one disk HARD are not visible. What should do?

  Best regards...

  Grolle,

  Leave in the Raid Controller, what is the status of the table? In addition, was the raid 1 initialized after being created? If this isn't the case, then, who will have to be done before you try to install.

  If you download this and start on the lifecycle controller (F10) and then select deploy BONES, load these files there and proceed with the installation of the OS.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=M5VGR&FILEID=3325059394&osCode=MWS80&ProductCode=PowerEdge-R710&LanguageCode=en&CategoryID=DD

  I would like to know how will install it.

• TMS on Windows Server 2012?

  TMS 14.3 installation Guide and upgrade says to install on Windows 2008 SP2 TMS or 2008 R2.

  Is it possible to install MSD on Windows Server 2012?

  Did anyone done this yet?

  Sent by Cisco Support technique iPad App

  Martin and Paulo are correct... not are currently unsupported and highly recommend even not try.

  However, stay tuned... or coming soon, but probably not in the time frame you need. Go with Win 2008 R2 in the meantime

• AUSST 4.0 on Windows Server 2012 R2 installation

  Hello

  I am installing AUSST on Windows Server 2012 R2 with IIS 8.5, although I can't get the thing to work!

  I followed the instructions to use the Adobe update (AUSST) server configuration tool if I do something wrong.

  All updates have been downloaded to the directory "c:\AdobeCloudUpdate" (a little more than 80 GB). I created a new web site in IIS to point to this directory as root and set the permissions to the local group 'IIS_USERS' read, list, etc.

  I followed the instructions to add the types of files for maps to the level of the server, changed the classic and set AppPool to update the 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\web.config' file with the veriables add path to 5 file types.

  When you try to access the "updaterfeed.xml" of a client computer using the full URL of the "http://co-au-01.contoso.msft/webfeed/oobe/aam20/win/updaterfeed.xml", I get a XML page cannot be displayed error.

  

  I created a file of substitution of "AdobeUpdater.xml" and added this to a new package is created in Packager CC and deployed just Photoshop and Office CC application. When I load the soft CC I get a download error when you try to view the applications.

  

  I tried to change other web.config files not found on the Server IIS ("C:\Windows\Microsoft.NET\Framework\v4.0.30319\config") and also the v2 of .net and .net v4 in the 'C:\Windows\Microsoft.NET\Framework64', but no joy.

  I hope it's a very simple solution and just miss a step but little help would be highly appreciated.

  Thanks in advance,

  
  Tom

  Something I've discovered here is that you need to add a wildcard on the VAC/services/FAC file MIME type (more precisely the validation file), because the files of validation is not an extension so he threw back a 404 error.

  

  I hope it suits it for you!

• Problems installing OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2

  Hello Experts,

  We install OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2. He was installing (install the business - create a new BI system) smoothly, but in the last configuration Page progression at 27%, he was stuck. In accordance with the recommendation of oracle.

  It is a problem with WebLogic Server installation on Windows 2012 R2. That is documented in the unpublished bug 16844206 WLST IMPOSSIBLE GET ENV ON WINDOWS SERVER 12 WITH ENV MINIMAL

  MDG action plan-
  

  Install Java 1.7.

  Installation of WebLogic Server 10.3.6.

  Patch WebLogic Server with Patch 16844206 .

  Perform a software installation of OBIEE 11.1.1.9.0.

  Configure OBIEE

  
  

  Following the same thing we did it-

  (a) installed weblogic 10.3.6

  (b) Dowbloaded the patch and ran GUI and command line.

  
  

  1. When was held from the GUI

  Downloaded Patch_16844206. copied the content of this file zip, except the file Readme in your cache directory SmartUpdate (MW_HOME/utils/bsu/default cache_dir). Ran the bsu.cmd file located in the folder WM_HOME/Middleware/utils/bsu to open the Smart Update utility Oracle - and then 'downloaded Patches' table ffound Patch Id SRSV Bug 16844206 and then clicked on apply.

  However after doing a "running Validation" popup appears and he is blocked for 90 minutes at this same position. (see screenshot)

  http://www.use.com/FonC8

  2. When ran from command line-

  
  

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3-patch_download_dir = D:\app\Oracle\Middleware\utils\bsu\cache_dir-statut = downloaded - discovers - verbose

  Exception in thread "Main Thread" means

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3 - patchlist = 23698-verbose - install

  Exception in thread "Main Thread" means

  
  

  Any solution?

  
  

  Thank you very much

  Benoit
  

  Hi all

  According to Oracle advises has resolved it as follows.

  It is a failure with OutOfMemory. Increase the memory allocated for the process of the bsu. Change the following line in bsu.cmd

  MEM_ARGS =-Xms256m-Xmx512m set

  TO

  Set MEM_ARGS =-Xms1024m-Xmx1024m

  Basically, you will need to open bsu.cmd in Notepad, and then change the setting above. And then again run. And it will work.

  Thank you very much

  Benoit

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• Cannot install windows server 2012 on VM

  Well, I installed virtual box. I downloaded the ISO and VHD in windows server 2012 but will not be accepted by the Virtual box?

  Josh,

  I would have you post here.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Back to us for problems with Windows in the future.

• Install OBIEE11.1.1.9.0 on Windows Server 2012 SP2

  Hello Experts,

  I try to install OBIEE11.1.1.9.0 on Windows Server 2012 SP2. Asked me to do only install S/W Installation company wasn't (Doc ID 2027617.1).

  The solution was-

  There is a work around that is to implement a software installation and follow the instructions of section 4.2.5 - installation Oracle Business Intelligence 11 g with your own Java Development Kit (JDK) - the Guide of installing Oracle® Fusion Middleware Oracle Business Intelligence, where you need to patch Weblogic once it has been installed:

  1. Install Java 1.7.
  2. Installation of WebLogic Server 10.3.6.
  3. WebLogic Server patch with Patch 16844206.
  4. Perform a software installation of OBIEE 11.1.1.9.0.
  5. Configure OBIEE.

  This is why I did the following-

  1 installed jdk1.7 (jdk-7u80-windows - x 64)

  2 installed RCU 11.1.1.9.0 (rcuHome\BIN\rcu.bat)

  3. then ran wls1036_generic.jar

  C:\Program Files\Java\jdk1.7.0_80\bin > java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  Cannot create the temporary extraction directory in the default location.

  
  

  I get the above error message. Attaching screenshot. http://www.use.com/FpC0P

  Can you please help?

  
  

  Thank you

  Benoit
  

  Just to update, finally ran wls1036_generic.jar. Problem was probably related to the virtual machine.

  We were in-

  C:\Java\jdk1.7.0_80\bin>Java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  Error - a

  Cannot create the temporary extraction directory in the default location.

  The temporary extraction directory is the Windows temporary folder. The location is-

  Folder - %USERPROFILE%\AppData\Local\Temp where %UserProfile% - c\:users\ [acctname]

  But when you run start > run > %Temp%, I see.

  C:\Users\ccbgso\AppData\Local\Temp\2--et error was a drive is not accessible.

  And \2 was the problem, because there is not C:\Users\ccbgso\AppData\Local\Temp\2.

  To correct this error, we did it-

  Start > run > Regedit > hkey_current_user > volatile environment

  And found 2 below.

  Chosen the 2, then the two TEMP & TMP sought in the right pane.

  the values were - C:\Users\ccbgso\AppData\Local\Temp\2

  Right-click each & click on modify, remove the \2

  Clicekd on ok.

  Disconnected and re connected.

  And then ran

  C:\Java\jdk1.7.0_80\bin>Java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  This time, he began the extraction and 'Install Oracle - Weblogic 10.3.6.0' Welcome screen appears.

  Thank you best regards &,.

  Benoit

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it