cfdocument .swf error driver

Similar Questions

• a digital game gives error driver and closes to the main screen

  When I play it crashes

  It says digital error driver when im playing a game and there's a lot that happens in the game wise grafich it freezes it goes back to the start screen saver, but it is reinforced by 500% the Start button is large enough. I restart the any then it goes back to normal. What can I do please help me thank you

  There are many reasons why a PC "behaves" in this way.

  These annoying 'glitches' can be caused by an overloaded hard drive, CPU overworked, Malware, 2 AV, useless data, browser addons, or you can have unnecessary programs running in the background, etc...

  For you to try - troubleshooting steps
  
  * If you are overclocking STOP.

  * Make sure that all the intake/exhaust vents are clean as well as fans.
  Download some software temp monitoring for cpu, gpu.

  * Event Viewer.
  Type eventvwr in the search and go into windows journal > application tab.
  Search for errors. Errors have red in the left column.

  Look for errors that say crash app, app crash, or everything about the CURRENT problem.
  When you find either take them a screenshot of them and download about us, or note the ID codes and event source and look for them in Google.

• Satellite P20: Device i/o error - drive will not read anything

  My bed dvd player is nothing. She made some attempts to turn the cd and then give up. Click the icon of my computer dvd player gives me an i/o device error message.

  I had these problems early, holding the disc and pushing rapidly solved. Now it does not work even if I use different user names and the different internal hard drives.

  What I have to buy a new dvd player or can it be repaired? also, would it not a motherboard problem, which means that I should probably get a new laptop?

  Thanks for any help,

  Andrew

  Hello

  I put t think that this drive problem has something to do with the motherboard. The operating system is running properly and I think that you have only one problem with your CD/DVD drive.
  Unfortunately, I put t hear it is possible repair. It is perhaps possible to s, but I think that costs are too high to do and this is why the new replacement drive is always advised.

  You can try to remove the drive from Device Manager and then after reboot the operating system should recognize it again. You can also try to clean the lens but I n t think this will solve anything.

• Bluescreen error driver Tecra A4

  Tecra A4 model PTA42A-01C001 running XP - Pro bluescreens occasionally with a driver error. I can't find my model on the download from Toshiba site. Can someone please help?

  Very interesting, mate! :)

  Thank you for your comments. It's always interesting to read.

• Satellite A300 PSAGCA - 02Y010 - error: driver Webcam open failed

  Problem:
  Receive error whenever I try to use the camera for Toshiba support software: Webcam driver open failed. Restart the computer or the camera. Webcam does not work in Skype. It seems that it is a very common problem with the A300s series, but there is no clear solution there.

  Material
  Series: A300
  Model: PSAGCA-02Y010

  Software
  Operating system: Windows 7 64 bit
  Camera Assistant Software for Toshiba: 1.7.175.0123

  Details
  I recently did a clean install of Windows 7, Windows Vista update. I've never used the web cam on Windows Vista, so I can't testify as to whether or not the web camera is workin properly. However, when I tried to use it with Skype, it did not work. I reinstalled the driver that I backed up before I installed the new operating system, but it did not work. The web cam does not appear at all in Device Manager - even when the value for show hidden devices. Trying new material added through the control panel fails to detect the webcam at all. I rebooted after each installation/repair of the driver.

  Measures taken

  Reinstalled drivers saved
  I used the third-party software (Double Driver) to back up and reinstall the drivers for the webcam after I installed Windows 7. Double Driver claimed there was no device to install the driver. Manually, I copied the files in the folder using the camera and replaced existing ones. The files I copied were:
  casflr.cat
  oem34.inf
  Restore.ini
  UVCFTR_S.SYS

  Pilots relocated from site Web from Toshiba
  Vast Goolging turned only recommendations to uninstall and reinstall the drivers. I was unable to find the drivers for windows 7 64 bit, but I tried for my laptop model for Windows Vista 64 - bit - no luck. I tried to install software camera for Toshiba support, as far as I know, including the driver - it gives me the error described above.

  I also tried to find a universal Windows 7 driver for the webcam - I was unable to find one.

  Check the registry value is Correct
  I tried also checked the registry value to HKEY_LOCAL_MACHINE/System/ControlSet001/Enum/USB/SN001/ClassUID corresponds to the value in C:\Program Files (x 86) \Camera Assistant Software for Toshiba\driver\64bit\casflr.inf as and C:\Program Files (x 86) \Camera Assistant Software for Toshiba\driver\32bit\casflr.inf recommended by some article is recommended.

  Please, I would really appreciate it if someone could help me out here. I've exhausted all the options I can think.

  Probable solution:
  I met a thread post who suggested a loose wire was responsible and that the camera could work when the cover is almost closed. I tried this and the camera suddenly appeared in the Device Manager. However, I still can't make it work with Camera Assistant Software or Skype.

  Post edited by: A300Owner

  > The web cam does not appear at all in Device Manager - even when the value for show hidden devices.
  > I met a thread post who suggested a loose wire was responsible and that the camera could work when the cover is almost closed. I tried this and the camera suddenly appeared in the Device Manager.

  Does this mean that webcam does not appear in Device Manager if the cover is open right?
  In this case, it seems that there is no link between the webcam and the motherboard.
  As far as I know as the internal cam is connected to the controller card USB mother s and possibly there is a bad connection.

  Possible solution: I think that the technician needs to disassemble the laptop to check the connection :(

• Satellite Pro A10: IDE #1 error - drive doesn't appear unless the CD is inserted

  Hello

  I've been recently wearing on my bed watching a DVD when I fell asleep with the laptop sitting next me on my bed. During the night, however I moved and he accidentally knocked on the side of my bed.
  The next day when I booted up the loading it said IDE #1 error since then I understand it is a mistake to CD/DVD drive, the device works very well, starts ok (except the IDE error) and I can use it as usual except that there is no DVD drive in 'My computer', which is a bit of a pain when I want to watch a movie/play a game or install something.

  The drive itself is completely insensitive, when I press the button to eject the tray, it doesn't do a thing.
  I decided to try to remove and put back the drive to see if it was struck just loose when he fell of the bed as he fell only in short way (approximately down to 18 ".)

  I removed all the covers on the bottom of the laptop and checked that all was in place correctly and to try to understand how to remove the drive but would not do too adventurous as to worsen the situation, the only thing I have done is to remove the CPU fan and remove a few stuffed animals and remove the HARD drive and glanced to make sure it was not damaged in any place) It wasn't) and then replaced and replace all covers.

  When I rebooted the system, it started fine as usual, and the player react when I press the eject button, but the DVD player (sometimes) will now appear in 'My computer', but only when I insert something (be it a DVD/game/program), then it displays the error message an error of e/s on the device there.

  Any help of you all would be a great help, I thought just remove the drive and replacing it with a new one as a DVD RW one but I do not know how, I would be very grateful for advice and guidance you could provide.

  Thank you very much
  Michael

  Hi Michael,

  It is possible that the relocation of your optical drive may be necessary to refer it to the full. Unfortunately on the A10, it will be dismantled in order to achieve its screws located under the keyboard.

  Please see the following link for the complete disassembly instructions. The DVD player is covered in step 13. http://www.irisvista.com/tech/laptops/ToshibaA15/SatelliteA15_laptop_disassembly_1.htm

  concerning

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• Power status error driver

  Hello

  A few days ago, I bought a Lenovo G50. But I find it very slow and it had to restart all of a sudden for a State power driver error twice today already.

  This is not normal.

  Can anyone help? I have to go back to the shop? And why is it so slow?

  Thank you

  Egbert

  Hi EgbertvanKeulen,

  Welcome to the Forums.

  According to the request, we understand that you are facing problem with error state power driver in your laptop Lenovo G50.

  As you also mentioned that the system is slow and restarts the system startup in the BIOS and check if the system reboots. Also run LSC (Lenovo Solution Center) diagnostics and look for errors.

  Click here for LSC diagnostics.

  As you mentioned about the power of driver error, try to update the BIOS and check for the issue. What this error pops out.

  Click here to see the update to the BIOS for windows 7.

  Best regards

  Ashwin. S

• C6350, install error - driver problem?

  Hi all

  RAN into this error while installing drivers for my C6350. I have had this printer for some time, it comes first in the management of problems during installation. Alos tried repeatedly, defraged and tried again, but still does not. I have obviously downloaded the driver several times just in case missing data issues.

  Any help really appreciated, John.

  This text has been in the header of message box:

  «C:\Users\xxxx\AppData\Local\Temp\7zS0935\Setup\... \Setup\hpzprl40.exe"-m...»

  This text was in the box, preced by Red Circle X

  "The system cannot find the file specified."

  Spec sys: Win 7 64 bit Premium / I7 Prc / 12 GB Mem / Avast! AV

  Downloaded from HP, driver: PS_AIO_04_C6300_Net_Full_Win_WW_130_140

  Restarted PC, router and printer before installing the driver, stopped Avast!

  Thanks for the reply to my post, but the suggested actions were not working.

  I clean all previous HP driver and temporary files, downloaded the driver, but when I tried to install I got an error that it could not find a 9diferent file to that stated above in the first post, I looked for the file in question and it's in the file!

  I'm not a novice around the PC, and as I mentioned earlier, this is the first time I ran a question. It probably has something to do with my Win7 OS...

  HP Universal driver, printer can now be used again (connected via a wireless network)

• Diagnostic test error: drive hard hitachi failed the diagnostics tests

  My computer is a HP Pavilion 6500 series; Windows 7 64-bit. under 18 months.  Receipt of the following error messages to a HP diagnostic test: drive hard Hitachi failed the diagnostics tests: test to look at random; funnel seek test; surface scan test. Please notify.  I need to replace the hard drive?

  Hi Pete,.

  You are welcome.

  It is difficult to say exactly why the HARD drive started to fail and there's always a random item concerned - I've known a few hard drives fail after a few weeks, while others can be quite happily far longer than expected.

  Best regards

  DP - K

• Setup runtime error driver Photosmart C4780

  I bought the new desktop computer Dell with Windows 8.1. Have C4780 printer used with XP.  Local use rather than network or home group. Connected the printer directly to the printer.  Regardless if WiFi enabled or disabled.  8.1 Windows recognizes the printer on the list of devices, but offline.  Problem is driver needs.  I tried several times to download the driver on the HP site but came to the top with many problems. Windows Update does not work even though my printer is on the list.  Finally, succeeded to download the software/driver for Windows 8.1 64bits (checked and that's okay). Ran hppiwexe.  Then ran HPInstallerSetup.exe application.  After it extracted I get a runtime error "program C:/Users //AppData/Local/Temp/7zS7723/setup.exe this application has requested it in an unusual way." Please contact support team of the application for more information. "What should I do now?

  I solved the problem. I visited my local independent computer store repair and maintenance and told them about the problem of the printer.  They proposed several possible solutions. (1) be sure that the printer was plugged into a USB 2.0 port, and not a 3.0 port. (I had plugged into the port 3.0).  (2) the computer might already have a Microsoft driver for the printer.  I'll just have to find it. (Was still not sure how). (3) download the driver manually (I don't know how to do this).

  After tweak again and leads research on Google I came across a statement on the parameters of HP network device support, but with a different version on Windows.  I have cliced the start options, one of which was Device Manager.  I clicked on Device Manager, printers selected, then my printer has been listed as a subset and clicked that.  Make a right click does appear some options, including the update driver software.  I clicked on it.  Then click search automatically for updated driver software.  He did his thing... ended with a statement that it was loaded successfully.  I tested the printer... and it worked!

  I assumed that this was the pilot manually download approach.

  Thanks for your help!

• Error "driver cannot be installed on systems no trackpoint.

  I'm trying to get my otherwise functional trackpoint to work with Evernote on my T42p. People on their forums solved the problem by updating to the pilot the most recent trackpoint. Fine. I uploaded it here: http://support.lenovo.com/en_US/downloads/detail.page?submit=true&componentID=1296773861251&DocID=DS... but it will not be installed. I get this error: "device driver cannot be installed on systems no trackpoint" obviously, I have a trackpoint! Why this is happening? What can I do to get the new driver installed? Can I do it manually from the Device Manager?

  On Thinkpads with touchpad you must update the ultranav driver. This package also contains a trackpoint driver (see instructions for installation on the download page).

  You tried to install the driver package is for systems Trackpoint only as X - Series ThinkPad X 200.

• attach the problem. Tablet connection error: driver not found

  I can't connect my tablet which has android v4.2 Jellybean. It shows driver not found. what I can do.

  Original title: attach problem

  Hi Andre,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing when you plug your tablet with Windows 7 system. I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. What is the exact error message you get, when you say, "Driver not found"?
  3. Connecting the Tablet via a Wi - Fi hotspot connection when you mention, "tethering problem? If this is not the case, how you try to connect the Tablet?
  4. What is the brand and model number. the Tablet?

  The question seems to be resulting in an incompatible or damaged driver that obstructs the connection. First, I suggest you to check if you are able to connect the Tablet via a USB cable.

  In addition, I would suggest trying the following methods and check if the number is reproduced.

  Method 1:

  Run the network troubleshooter to verify connection of the Tablet problems.

  Using the troubleshooter from network in Windows 7

  Also, I suggest you run the hardware and devices Troubleshooter to check for problems with the related drivers that can help connect with the tablet.

  Open the hardware and devices Troubleshooter

  If the problem persists, try the following method.

  Method 2:

  Manually install the Windows 7 compatible driver from the manufacturer's Web site.

  For your reference:

  What to do when a device is not installed correctly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• "Restart your pc on a problem and needs. We are only collecting the error information, and then we'll restart for you / / error DRIVER IRQL NOT LESS or EQUAL (Smb driver.sys)

  I bought a Dell XPS 14 with Windows 8, less than a month ago, and I get a blue screen with the error message above several times in the past two weeks. I'm not all that computer, I'm looking for all possible assistance. I found the next with the same error message thread, I followed the advice and attached my minidump.zip file.

  Any help you can give me would be most appreciated - thanks in advance!

  Hi dajoip,

  It seems to be an older version of Kaspersky installed which can be a problem because it may not be entirely compatible with Windows 8.

  One thing I might suggest is to uninstall Kaspersky and see if the blue screen errors to solve.

  Consider the alternative security such as firewall and antivirus integrated Windows 8 (Windows Defender) software.

  You can also take advantage of the update or uninstall Daemon Tools.

  If the error persists try the synaptic generic drivers for following a link as the Smb_driver_Intel.sys seems to be a synaptic driver (create a system beforehand Restore Point):

  http://www.Synaptics.com/resources/drivers

• error driver irql is not less than or equal

  When connecting my computer to the internet via mobile it shows this error

  Shivamsingh

  These related Netwsw00.sys Intel® Wireless WiFi Link Driver of Intel Corporation.  I would like to re - install the latest driver available.