Change attached code and corrections

Similar Questions

• Hello guys, I have problem to change color codes and need help!

  Hello, so basically I tried to change the color code by downloading this color.xml of the site How to change Adobe Dreamweaver Code view topic - Hongkiat.

  When you look at the site, the preview is also beautiful it may be, full of colors. And here is mine.

  

  And this is after I change color to dark color background

  

  As you can see, the colors. are not so good, a little monotonous. The tutorial showed there will be yellow, blue, red and grey.

  Here's how I put my color code

  

  Everything must be although I have not tampered with other color as the background.

  This is the path to the folder where I put my colors.xml

  

  I had to make sure that the problem is not in the file itself, but it turns out that, he showed the same result when I used the file from another tutorial. As far as I know, the path is correct.

  Can someone help me with this?

  I try my best to answer within 3 hours to solve this problem.

  Thank you very much.

  Errors in your HTML coding or CSS affect how code colors appear.  I'll give you an example.

  In this first screenshot, my code is valid (no error).

  CSS - http://jigsaw.w3.org/css-validator/

  HTML5 - https://validator.w3.org/nu/

  

  In this 2nd screenshot, my code contains errors.  Notice how the code colors have changed?

  

  Then me humour and cross your validation code first checks that your code is error-free.   Then tweak your code according colors.

  Nancy O.

• they changed my code and secret question and answer and I can not get!

  My new mail me find is * address email is removed from the privacy * or * address email is removed from the privacy * and my codes are and has been johnyrambo

  My new phone number is 0030 6980376544 (because I live in Greece). I changed the connection company internet and home as well my phone number because I had an accident and I lost my cell phone. my old zip code is 11146 or 11143 and 111143 not because I wrote it maybe wrong. My little contact is amontilado as I remember and kris Caron and nhs and * address email is removed from the privacy * and some of my emails was the asiankisses I also remember and chinlove and japancupid also. I had and msn too and it's * address email is removed from the privacy * my name.
  I can't in my account at least 4 months now

  Hello

  If you are referring to the problems of hotmail please repost in hotmail forums

  We cannot help you in these forums of vista

  Portal on the forums of hotmail hotmail:

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  Consult with Microsoft Certified Solutions
  How to work the views Active Hotmail?

  What to do if you can't connect to Windows Live Hotmail

  Your account has been temporarily blocked

  Compromised account - unauthorized account access

  Reset your password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Close your Hotmail account

   

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• When you try to download my code, and the series only. There is an option to use a 24-bit or a 64-bit format. Apparently I choose evil, but I can't go home to change.   How can I clear it so I can continue the download process

  When you try to download my code and serial No., there is an option to use a 24-bit or a 64-bit format. APPARENTLY, I GOT ONE WRONG, but I can't go back to this page to change this option. It is a question...

  Do you mean 32-bit or 64-bit?

  What version number and program?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• Inserting an image change the layout and spacing of my code - how do I prevent this?

  Mode code in Dreamweaver, whenever I insert an image via the "Insert" menu, the surrounding code layout changes (sometimes significantly). See the image below.  It's really annoying to have to go back and add tabs and fix the spacing each time I have insert a picture.  Is there a way I can avoid this?  I use Dreamweaver CC and it was always a problem.

  

  Instead of using the 'Insert image' command, drag the image to your files/project manager in the code instead. It will retain the formatting of the code. And speeds up the workflow as well.

  Don't ask me why the command changes your code formatting, while you drag an image does not work. There are the devs forgot to take the tail missing the tag image account.

• Custom Logging Codes and Messages database options

  I use TestStand 4.5 with the provided standard SQL database schema. I noticed that in the table UUT_RESULT the only time where what a UUT_ERROR_CODE or a UUT_ERROR_MESSAGE is written is when the UUT_STATUS is error. I would like to be able to connect our custom FileGlobals.Error_code and FileGlobals.Error_text in these fields when the UUT fails a test.

  I'm rather not change the schema but just get help on how to get my global variables in the correct fields.

  Thanks in advance.

  Steve

  Steve-

  To accomplish what you're trying to do, IE. the value of the message and the error code USE without updating the database schema, you would have to change the entry points for Single Pass and Test UUT for patterns that you use. You must add a step after the MainSequence called step that evaluates if the call to MainSequence failed and if that were the case, change the last result placed in the Locals.ResultList table. You must set the Locals.ResultList [x]. Error.Code and Locals.ResultList [0]. Error.Msg properties on this result for the global values you mentioned. If overall file values in the template file, then this is an easy task. If the global file value is in the customer file or another file, you will need succeed somehow to the entry point. Many options: store values in station model and global entry point will recover, have value assign customer at the local level in the point of entry using expression as RunState.Root.Locals... or create temporary properties on Execution.RunTimeVariables that contains the model entry point access determine if exists and pull values of. You will need to make sure that the previous values are disabled before the next USE. I hope this helps...

• Change Security Code

  I have a BT Home Hub 4 connected by radio to my lap top. I could change the admin. Password.

  However, I can't change the security key Code. Every time I enter a new key Code and click on apply, I get a screen message "are you sure". I click Yes and lose the internet connection. Also comes with an Ethernet connection.
  The wireless network adapter is up to date and work correctly.
  So right now, I can only use the key Code manufacturer default. Any ideas please?
  Thank you, wicket T.

  Odd. Do you mean does not change the key, or after its change you get cut?

  I just got a HH4 and allowed me to change the key, so I don't think it's a "characteristic of the system' (as BT can call :-)).)

  Have you tried to reset the HH4 and leave? http://BT.custhelp.com/app/answers/detail/A_ID/11386/~/how-do-i-reset-my-BT-Home-hub-to-its-factory-settings%3F

  You can get a better response in the forums of BT, if you have not already tried it. http://community.BT.com/

  Something which possibly might affect it (I don't know but his is worth a quick look) is that I noticed that there is an option check for ' Sync with 2 .4GHz: ' (use the same wireless SSID and the 2.4 GHz wireless key) you are changing one but not the other?

• Solved: Error 0x80072ee2 Code and problem of invalid key when the key is invalid

  The problem with computer problems, it's that they can lose a huge amount of time trying to find the right solution that actually works.
  The reason why I created this issue and the solution is because I don't think that anyone allowed to solve the problem and I don't have the time to answer each question.

  Maybe the administrator can warn everyone and copy the message to the response section wherever it is, thank you.

  This solution is the one that actually worked properly and should work fine for 99% of all non only; 0x80072EE2 but key issues not valid genuine key is used.

  I don't remember if it was before I ran the Windows 7 disc or after completing what I got the following error message
  "Windows Activation error Code: 0x80072EE2.

  1)< show="" me="" other="" ways="" to="" activate="">
  2)< use="" the="" automated="" phone="" system="">
  3)< check="" nearest="" location="" (country)="">< next="">
  4)< telephone="" toll-free="" telephone="" number="">
  (A)< option:="" 1="">
  (B)< #="">
  (C) enter the activation number into each box when asked to do so
  1: after entering the right number in each box-< #="">
  2: If you no more; don't remember the exact number you placed in the area or you place
  wrong number
  It is easy to replace (edit) the wrong number and continue.

  BEFORE YOU INSTALL OR REPAIR WINDOWS 7 OR ANY OPERATING SYSTEM *.
  SOFTWARE BACKUP ALWAYS 1 PREFERABLY ON AN EXTERNAL HARD DRIVE *.
  BUT, OF COURSE, YOU CAN USE USB DRIVES OR DVD RECORDABLE RECORD... *.

  Install or repair Windows 7 (in my case, Home Premium 64 bit OEM but the similar method should be used for other windows): -.

  (1) insert my OEM of Windows 7 Home Premium 64 bit disc in my drive (in my case E:\ Drive BD - ROM combo
  -You probably D:\ DVD burner)
  ((2) IF the disc runs automatically and then go to 3) below
  (A) if the disc does not automatically
  1: Start (red, yellow, green, blue & flag (icon) in a circle) in the lower left corner of the screen
  in the taskbar
  2: select it (left click on the mouse button)-computer-select the drive (device with removable storage).
  you put the Windows disk in
  3, select the drive-Yes (if displayed) user account control
  (3) Windows 7 (Windows Installer) is displayed
  (A)< install="" now="">
  (B) install Windows - Get important updates for installation appears
  1:< go="" online="" to="" get="" the="" latest="" for="" installation="" (recommended)...="">
  2: I left checked (selected) the box, which refers, "I want to help improve the windows installation.
  -Useless - do not trust MS & partners - MS should provide free assistance
  especially when their software created problems in the first place.
  3: check the, "accept the terms of the license" (automatically without reading).
  because you have no choice if you want to use.
  4:< next="">
  5: "which type of installation do you want?
  A: I chose < upgrade=""> -because if it solves the problem it would save a lot of time.
  B: custom (Advanced) - to only use as a last resort and after backup all data and applications programs.
  -It is easy to format and install Windows 7 and other operating systems.
  -The main problem is, (the huge amount of time)
  find and restore all; drivers, applications (programs), emails.
  (C) to continue to follow the Wizard (information/instructions)
  (4) I followed the wizard - to give accurate information to reinstall Windows 7, but I received an error message
  -J' have probably first uninstall Windows 7.
  -NB! If you upgrade all software from a previous version do not remove the previous version
  unless directed to do, because he needs evidence that a previous version exists.
  -If you install a full version of a software, it's usually best to uninstall the previous version
  before installing the new version.

  Hope that this record many people losing large amounts of time, I did.

  Before I forget, every time (including recently) I asked for Activation of the aid staff
  They told me to contact Microsoft (MS) Technical Department
  (even to resolve this error: 0x80072EE2, which is a problem of Activation).

  Therefore, I would never check for MS and partners to obtain automatically the information from my computer.
  Occasionally, I'll send messages manually when asked.

  Solved: Error 0x80072ee2 Code and

  The key problem of invalid when key is valid

   

  The problem with computer problems, is that they can lose a huge amount of time

  try to find the right solution that actually works.

  Why I created this issue and the solution is because I don't think that no matter what

  No one helped to solve the problem, and I don't have the time to answer each question.

  Maybe the admin can warn everyone and copy the message to the response section

  wherever it is, thank you.

  This solution is the only one that actually worked properly and

  should work fine for 99% of all and not only;

  0x80072EE2 but key issues not valid genuine key is used.

  I don't remember if it was before I ran the Windows 7 disc or

  After completing what I got the following error message
  "Windows Activation error Code: 0x80072EE2.

  1)< show="" me="" other="" ways="" to="" activate="">
  2)< use="" the="" automated="" phone="" system="">
  3)< check="" nearest="" location="" (country)="">< next="">
  4)< telephone="" toll-free="" telephone="" number="">
  (A)< option:="" 1="">
  (B)< #="">
  (C) enter the activation number into each box when asked to do so
  1: after entering the right number in each box-< #="">
  2: If you no more; do not remember the correct number

  who has placed you in the box or you put the wrong number
  It is easy to replace (edit) the wrong number and continue.

  BEFORE INSTALL OR REPAIR - WINDOWS 7 OR ANY OPERATING SYSTEM
  ALWAYS 1 BACKUP SOFTWARE. PREFERENCE-HDD EXTERNAL

  BUT, YOU CAN USE A USB DRIVE OR RECORDING ON RECORDABLE DVD DISCS...

  Install or repair Windows 7 (in my case, Home Premium 64 bit OEM)

  but, the same method should be used for other windows):-

  (1) insert my OEM of Windows 7 Home Premium 64 bit disc in my drive

  (in my case E:\ BD - ROM combo drive - you probably D:\ DVD burner)
  ((2) if the disc runs automatically and then go to 3) below
  (A) if the disc does not automatically
  1: Start (red, yellow, green, blue & flag (icon) in a circle)

  in the lower left corner of the screen on the task bar
  2: select it (left click on the mouse button)-computer-select the drive

  (Device with removable storage), you put the Windows disk in
  3, select the drive-Yes (if displayed) user account control
  (3) Windows 7 (Windows Installer) is displayed
  (A)< install="" now="">

  1: after you place Windows in the drive do not touch keyboard keys

  while restarting the computer (once it has been shut down

  Just enter the password to log back on and ignore the error messages
  (B) install Windows - Get important updates for installation appears
  1:< go="" online="" to="" get="" the="" latest="" for="" installation="" (recommended)...="">
  2: I left checked (selected) the box, which means,.

  "I want to help improve the windows installation.
  -Useless - do not trust MS & partners - MS should provide free assistance
  especially when their software created problems in the first place.
  3: check the, "accept the terms of the license" (automatically without reading).
  because you have no choice if you want to use.
  4:< next="">
  5: "which type of installation do you want?
  A: I chose< upgrade="">

  -Because if it solves the problem it would save a lot of time.
  B: custom (Advanced)

  N ' use as a last resort and after backup all data and applications programs.
  -It is easy to format and install Windows 7 and other operating systems.
  -The main problem is, (the huge amount of time)
  find and restore all; drivers, applications (programs), emails.
  (C) to continue to follow the Wizard (information/instructions)
  (4) I followed the wizard - to give accurate information to reinstall Windows 7,

  but I got an error message.
  -J' have probably first uninstall Windows 7.
  -NB! If you upgrade all software from a previous version

  do not delete the previous version unless told to do so,

  because he needs proof that there is a previous version.
  -If you install a full version of a software, it's usually best to uninstall - previous version
  before installing the new version.

  Hope this save many people lost large amounts of time that I lost.

  Before I forget, every time (including recently) I asked for Activation of the aid staff
  They told me to contact Microsoft (MS) Technical Department
  (even to resolve this error: 0x80072EE2, which is a problem of Activation - I couldn't believe it).

  Therefore, I would never check for MS and partners

  for the information automatically to my computer.
  But, sometimes I send messages manually when asked.

  MS have done at least millions of people that help the MS, but still

  MS refuses to provide Support Free Chat in the world.

  -How much profit is MS wants to do,

  especially in situations when in fact MS software causes problems.

  To save space the administrator can delete previous versions of courrupted.

  I only hope that the conversion software does not change the format of this version too.

• Lesson 1-1 code is correct?

  Hi all.

  I just started watching a course and have finished all the chapters of lesson 1, no homework and quiz.

  So we in Lesson 1-1 example usage of lambda expressions (with my method createStudentsList() to fill the list):

  Students list < student > = createStudentsList();

  Double highestScore = 0.0;

  for (s student: students) {}

  If (s.getGradYear () == 2011) {}

  If (s.getScore () > highestScore) {}

  highestScore = s.getScore ();

  }

  }

  }

  It compiles and works.

  But the proposed changes by using lambda expressions does not work:

  Students list < student > = createStudentsList();

  Double highestScore = student

  filter (new predicate < student > () {})

  public boolean test (Student's t) {}

  return t.getGradYear () is 2011;

  }

  })

  .map (Mapper new student, < Double > () {})

  public Double extracted (student s) {}

  Return s.getScore ();

  }

  })

  . Max();

  saying "the filter method (new predicate < student > () {}) is undefined for the type List < student >" and "Mapper cannot be resolved to a type.

  Even the latest version of the code does not compile:

  Students list < student > = createStudentsList();

  highestScore = student

  filter (student s-> s.getGradYear () == 2011)

  .map (student s-> s.getScore ())

  . Max();

  with "syntax error, insert ';' to complete the statement" for the two statements of student.

  I managed to make it work with this approach:

  Students list < student > = createStudentsList();

  Double highestScoreL = student

  . Stream()

  filter (s-> s.getGradYear () == 2011)

  .mapToDouble (s-> s.getScore ())

  . Max()

  . getAsDouble();

  I do wrong or just missed sth sth important? Sorry for the question so long - it is because as pieces of code .

  BTW I use Eclipse March 4.5.0 and jdk1.8.0_51 if that matters.

  There is problem with your code. I fixed your code and it would be:

  Student s0 = new Student(2014, 685);

  Student s1 = new Student(2014, 675);

  Student s2 = new Student(2014, 635);

  Student s3 = new Student(2014, 985);

  List of students of = Arrays.asList (s0, s1, s2, s3);

  Stream studentStream;

  studentStream = students.stream ().

  filter (new predicate() {}

  @Override

  public boolean test (Student's t) {}

  return t.getGradYear () is 2014;

  }

  });

  Stream highestScoreStream = studentStream.map (new function() {}

  @Override

  public Double apply (student s) {}

  Return s.getScore ();

  }

  });

  HighScore = highestScoreStream.max of in option (new comparator() {}

  @Override

  public int compare (Double d1, d2 Double) {}

  Return d1.compareTo (d2);

  }

  });

  Double highestScore = highScore.get ();

  System.out.println (highestScore);

  Make sure and tell me if you don't get anything. This is the detailed code pre JDK8 average. Now you can write it as functional programming.

  and Yes... The video code is just for us to understand. It is not syntactically correct as map is not a FunctionalInterface in JDK8.

• Is this a bug in Dreamweaver? Because the code is correct! Please advise!

  Hey coders.

  I'm pretty new to Dreamweaver, but have a decent understanding of the code and if I ever got stuck I usually figure out on my own, but today are not the case.

  My problem is: when I enter the code it didn't display correctly in my workspace, the slice falls completely down, when it should have been in the middle. But when I make it with the browser, it displays correctly! ???

  You can see my site here's progress to:

  http://www.topvizstudio.com/webproblem/index.html

  or you can download sliced HTML and Image here:
  http://www.topvizstudio.com/webproblem/index.html

  Please help, it is just killing me, I've already lost 2 hours trying to figure it out!

  Thank you!

  -Serge

  Design view is not 100% reliable.  What matters most is how your pages make in all the major browsers (IE 6,7,8, FF, Opera, Safari/Chrome...)

  The last picture is 500px wide and floating to the left, and yet the previous images are quite a bit more small. This leads me to think there isn't enough available on the page width to account for this installment.

  In addition, I do not understand why you are using may inline styles both in your HTML code.  This will make it much more difficult lifestyle changes later because your styles are not separated from the content.

  You must delete a semicolon after your image file names.

  Finally, your code has a typical beginner problem called division-it is.  In contrast to the provisions based on a table where each element is contained in a table cell, CSS layouts, there is no need to place each element on the page within its own division. In fact, it is often best if you do not.  Less increase in the code.

  image
  

  image
  

  image
  

  Review this 3-part tutorial. I think it will help you.

  Taking  a Fireworks (or Photoshop) comp to a CSS based layout in DW

  http://www.Adobe.com/devnet/Fireworks/articles/web_standards_layouts_pt1.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com