Change comas por puntos

Similar Questions

• Since ho changed com devo reinstallare sul nuovo per computer?

  Since ho changed com devo reinstallare sul nuovo per computer?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

  .

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• I can't change the color of the check mark character

  I use Adobe Acrobat XI.  I open the Annotations Panel and I'm trying to change the color of the thumbnail of the checkbox.  If I click with the right button on a stamp of check and go to properties then I can see a place to change the color on the appearance tab.  However if I change the color then I do not see the change comes into force on the box.  If I change the opacity so I do not see the change.  I have also noticed that if I resize the check mark so I can't do the new default size even if I check the boxes ' to default properties ' or 'locked '.

  Hi Johnny,.

  You cannot change the color of a stamp: stamps selected the colors that are used for a stamp designer. You will feel that you can change because there is a selector of color on the properties bar when you select a stamp. This color is however only for the popup note that is associated with the patch and not the stamp itself.

  Stamps come always to 100% of their size. You must create a new dynamic stamp to your desired size.

  Kind regards

  Rave

• PROBLEMAS CON PATRICK HP Deskjet 895Cxi

  Hola maestros.

  Tengo una HP Deskjet 895 Cxi installed y hasta the present me ha funcionado correctamente.

  The ultima vez as the cambie los cartuchos of tinta, understanding compatible unos, pero tuve than change the por una HP Deskjet 895Cse Emporda.

  HA funcionado correctamente hasta hace unos dias, pero ahora parece what ha "muerto."

  He ido has the casa donde compre los cartuchos y parece ser as solo quiere los 'original' original results as los cartuchos pero me cuestan casi como una nueva Patrick.

  Sabeis what puedo hacer?. If exist alguna probavilidad of 'resucitarla '.

  MUCHAS gracias por vuestra ayuda suicídio.

  Saludos muy cordial.

  Juan

  You posted in the English version of the Microsoft Answers forums. Please repost your question by selecting your language in the drop-down menu at the top of this page or by going to the international section of this Web page:

  http://www.Microsoft.com/communities/forums/default.mspx

   

  Translation of Bing above:

   

  Han published in the version in English of los foros Microsoft responds. Por favor, volver a publicar you pregunta seleccionando well su idioma in el menu desplegable in the part superior of this page o yendo a Sección internacional from this page:

  http://www.Microsoft.com/communities/forums/default.mspx

• Create a virtual machine from una Máquina física

  Buenas tengo a PC con windows vista 32bits y intento con virtualizar VMWare, vcenter converter standalone, para eso he cogido Máquina física y he pinchado UN segundo disco, he abierto el programa VMWare vcenter converter standalone y he hecho lo siguiente:

  PASO 1: Machine Convert: this local machine (Origen)

  PASO 2: Destination: here he against the ruta donde quiero save the imagen y well he probado an exportar-lo para vmware player 2.5 y también he repetido el paso para vmware workstation 6.5.X

  PASO 3: customise the config, donde he marcado las options than in el siguiente pantallazo muestro

  

  Con todo esto to me genera el archivo used despues of than quiero import en otra Máquina

  Ahora OCOG maquina donde quiero import dicha imagen física y he probado lo siguiente:

  Option 1: open el vmware y hacer file == > open, cojer imagen anterior tal cual y run - the

  Option 2: open the vmware vcenter converter program is run the option of 'set machine', donde el ORIGEN economics y our crea en otra vidéoconférence otra imagen supposedly "reconfigurandola" para adaptar - a Máquina dicha.

  Option 1 the opcion como con tanto 2 al correr imagen sale el windows vista logo y despues sale me el pantallazo AZUL diciendome than verifique if he wont algun device recently etc etc etc... y but that arrival Coupling Nut a hacer a chkdsk /f (el qual he probado a hacer desde entering her recuperacion consoled) y me said that no podia por hacerlo algun reason.

  Con todo esto, alguien me could hechar una mano, o Yes alguna sugerencia o consejo?

  Gracias,.

  What tenes el equipo original disco? Como you Le Diego el archivo boot.ini indica al bootloader a Quebec n tiene than ir a buscar los archivos inicio del sistema operating system.

  For example if in el equipo original tenemos UN disco SAS, SCSI o algo por el estilo Máquina virtual definimos UN disco IDE if the boot.ini no to change the Máquina en virtual durante el proceso of conversion you can than este quédé apuntando UN do disco SAS luego no encuentra ago than what defined tenes are UN disco IDE in the virtual.

  Para mi can come por ese lado. Of todas formas you pido what pegues una captured of the led error pantalla para as lo mas clearly identify pruned.

  Best wishes / Saludos

  Por don't favor no olvides calificar las responses you valiosos ayuda o were should

  Please, do not forget the points of call of the "useful" or "correct" answers

  ________________________________________
  Nicolas Solop

  VMware vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

  My Business Blog (Blog of the Wetcom group)

  Follow me on Twitter

  My Linkedin profile

  Join the Virtualizacion en Español group in LinkedIn

  

• Una Máquina virtual size

  Hola a todos, buenos dias!

  Tengo una duda acerca del tamano una Máquina take virtual en VMServer, ojala alguien me help puediera. There're than the size of las Máquinas Office Québec yo he hecho corresponden al tamano del disco duro as the al momento asigno to create; for example, if the asigno 50 GB of SD the size of the virtual machine vidéoconférence mide 50 GB. Pero hace back weeks, puse en el data store the vidéoconférence una Máquina virtual as mide 10 GB e VMServer y sorpresa, cuando the ejecuto ooooh y veo el tamano del disco duro tiene asignada esa virtual machine are 50GB. DEsde esa vez he quedrido reduce the size of virtual una as tengo maquina, which damp 50 GB (storing data of the vidéoconférence than is in the y tambien ese are el tamano del DD) sin poder lograrlo. ¿Alguien me pudiera dar algun tip para poder hacer esto?

  Por any comment, estare grateful.

  Saludos!

  crear maneras back are a virtual disco

  1 of ellas're asignar todo el espacio en disco virtual configurado of the instance. In this case, TR asignas for example 50 GB, el disco virtual ocupara 50 GB

  Segunda opcion're asignar el espacio en disco vaya creciendo conform to vaya utilizando, in this case TR asignas for example 50 GB, pero in the ocupas 10 GB, ocupara e 10 GB disco en instalacion going consistent creciendo is vaya utilizando

  in case of that dedicate reduce el Disco:

  1 opcion seria use VMware Converter (http://www.vmware.com/download/converter/) (gratis're) (in personal lo esta opcion es mas segura)

  the otra opcion are change disco por fuera el, como are el example annex (http://vmprofessional.com/index.php?content=2k3resize)

  I hope you sea util

  Saludos

  Jose Ruelas

• Verification of the icloud

  Every 15 seconds "audit of the Apple ID." Enter the password for [email protected] in the settings' returns, I can't check it because for some reason any when I first set up my phone, it changed .com to. co.uk and gmail don't. co.uk email addresses so I can't make an account with this email to check it out, I also can not disconnect because "Find my Iphone" is turned on, so I can't use Icloud and the message will not go away, what can I do?

  Reaching out to the Apple Apple Contact for help in the Apple ID - Apple Support account security

• Empty windows appear in the recently closed Windows list

  Recently, I upgraded to Firefox 13.0.1. (It seems that he could have two updates on the same day or after the other very short, but I'm not sure of him. I will be reminding upgrades of multiple instances of Firefox, all this same version. Thus, it * could * be true that this problem has arisen with this version or a recent previous version.)

  Since the upgrade, empty windows appear in the list of recently closed Windows (RCWL). I try to keep the clean list, so when I'm done with a window holding sites I know I don't want to go back, I close all the tabs in the window, leaving an unused new tab *, and then close the window. These windows should not be included in the RCWL, but they are now.

  [* I put new tabs to about: blank so that they will load the pages automatically.]

  Since this standard behavior change comes with an upgrade, and since I can't find any reference to it elsewhere, including the Support of Mozilla, I suspect that it may be a new bug.

  In troubleshooting, I tried deleting the list recently closed in these windows and tabs. I've never had before, but it seemed worth trying and as something that might have been relevant. I thought that perhaps a window would not "Save as really empty ' if it had recently closed tabs in the list. This tactic did not work.

  I also tried to start Firefox in Mode safe, the reopening of all the RCWL, each one tab - a 'new tab' in all cases - closing then close each window. They always appear in the RCWL.

  Please let me know if I can (or need to) provide additional information. Thanks for any help!

  Try to set the browser.newtab.url pref to about: blank so currently, you do not use this parameter.

  • http://KB.mozillazine.org/about:config

• system recovery

  I preformed a system recovery, a few days ago and after that he did all the updates for the computer the computer restarted as it was supposed to, but the message 'we could not finish the updates by undoing the changes' come and now my computer 9 stuck on it.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  According to the message that you posted, I suspect that this could be due to the recent changes are applicable

  Please perform the steps to solve the problem below:

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Last known good configuration" in the list of the early start Option

  Note: Wait until you get to the Windows desktop

  Step 04. Please remove unwanted startup items and uninstall unwanted applications

  Step 05. Please reboot / restart your PC normally

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• This LabVIEW programmer needs to know

  Hello guys...

  I'm working on labVIEW for 1 year last on mine.

  If I have problems I will post my questions in the Forum of NOR.

  But I don't know that a small drop of sea water...

  So what should a labview programmer should know?

  In short, how avoid the 10 screen wide spaghetti complete code of the structures of the sequence, local variables and the race conditions

  Also I advice take you a look at the certificates of NOR and the "learning curve":

  http://www.NI.com/white-paper/13120/en/

  http://www.NI.com/training/certification/

  http://forums.NI.com/T5/certification/BD-p/certification

  Edit: perhaps, I would just add a few points that I usually have to keep in mind during the phase of a new project of planning:

  • Choose the right framework or model based on requirements
  • Keep in mind how to get and set values - indicators and controls. If possible, use the cable to transmit data. Keep in mind what's OK to do with local variables (for example updating a control), and which should be avoided (usually) (read/write indicators for example). If you cannot use the wire to go directly to information (parallel loops), learn the correct use of notifiers, queues, UserEvents, etc...
  • who will use the code (it is very important, you need a totally different approach if you develop for yourself, or others who are not programmers and perhaps even do not know the physical part of the system...)
  • GUI always be responsible. Avoid bad habits (longer time running things in the GUI event loop).
  • Avoid the overcrowded façade: use pop-up windows for the settings, etc. That the user don't need to see always.
  • Error handling! It is very important to make a robust error handling strategy: for example if one of your HW components creates an error, your application cannot just stop everything. Handle the error, close properly all HW and file references (do not forget if you don't properly close a file, you can lose a LOT of data : file write is buffered memory RAM). Also record the error information to a log file.
  • If you need to make an EXE or installer: use a configuration file to store the user's changes: If the user changed the colors (width, etc.) a chart/graph, store this information in a configuration file that you load at the next startup of the application.
  • Automatic detection equipment (or users the possibility to modify the port/channel): what happens if your application moves to another PC (numbering changes COM port, etc...)? Your application needs to adapt to the changes of HW.

• DESKJET 3636: Once again, problems with drivers, ob! DESKJET 3636

  Here we are I am still here to complain for the installation of the drivers, this time with Win10 and a new printer, but the same question that in past. It seems that HP engineer have used bad and strange to pursue a way to write the drivers which conflict with end version of Windows, and I think it's a problem of permissions... but really hard to solve!

  As a result, I'm losing so much time to solve the problem and considering the installation of a printer, it's a matter of 5 minutes I'm really pis * d stop!

  Please read carefully: the printer works, it can print wusing ePrint service and it can print the laptop if I print from Notepad! Only with Notepad! Please avoid issues like "the printer has an IP address?

  The printer is connected to the WiFi, I installed the drivers, the basis and him full, nothing has changed: it allows to print a simple txt file, but it cannot print images 'graphic', Word, same Windows print test page button returns an error.

  When I start the HP software doctor he reviews "solved" a problem (the first voice of the list) and then, if in this application, I press the button test print, the printer prints! But after that he keeps does not not with the PC.

  I can't change the port TCP (errors), I can't change the permissions (System is proprietary, and I can't change it too), for some users, printing is disabled!

  Of course, I deleted the drivers, reinstalled, rebooted the PC, do not ask stupid questions. Also updated the firmware of the printer, nothing has changed.

  Why work so complicated fo HP to make a 'normal', easy to install driver and (especially)? I'm wasting time only here, too bad!

  What can I do? Please respond here in no time! Last time I lost 4 weeks after you changed the printer and the problem also appears in a new! I needed to spend money to call a high-level specialist who, after 3 hours and different call solved the problem. In my opinion is ho windows manage permissions and allow some services! It's huge relevant so that you understand this problem!

  Thanks for the reply but it has not been a solution useful, too easy and drivers have problems during installation on the system.

  I changed a few settings in the printer settings, the most important I've invited was the printer 'sharing', after I maybe had the chance to access/change come voice as the port.

  In port I selected the HP protocol instead of microsoft

  in advanced settings, I selected auto-tuning

  I have the double selection of voices on this printer, but is not serious it works!

• Has no parameters to query TCP/IP

  During repair the connection to the Local network on my laptop, I get an error with the following window:
  Windows could not finish repairing the problem because it is impossible to perform the following action:
  Has no parameters to query TCP/IP connection. Cannot continue.

  My router and the modem to work properly. Only this laptop has the problem. The system is configured to automatically obtain the IP address.

  Try to set it's static and see if the changes come. Also use a flash drive and another computer, download the latest NIC drivers and update your network card on the computer that is giving you problems.

• EA4500 does not work with IE11

  Salvation;

  Since the upgrade to IE11 I have more direct access to the router on my local network. Is it a firmware change come the page generated according to the browser is not supported.

  I know I could use Chrome or other browser but I don't really want to.

  Thank you

  On another post mentioned xperiandri you could use the workaround below.

  To work around the problem, you can press F12, developer tools will be open.

  Then go to emulation (last tab) tab and change first and third combo boxes in Internet Explorer 10.

• move the angry birds app to another user on windows pc

  My young son installed and has been playing Angry Birds on my Windows user account (Admin).  But now I put for each Member of the family user accounts help the contents of the control.   But when clicked on Angry Birds icon from HIS Office, he is not 'his' w/his Angry Birds game levels that it opened.  How to make 'her' Angry Birds game in his user account?

  Hello

  I suggest you to copy the data from the game of the old user account to the new and check if it helps.

  Steps to follow:

  a. navigate to the following location: (usually the location where the saved game data will be stored)

  C:Users\ (username) \AppData\Roaming\Rovio\Angry Birds\

  b. right-click on the folders (or files) and COPY - go to the new user account and paste it in the place where the game data.

  c. repeat as needed. Do not delete the files and folders of the account until you are sure they are duplicated to the new user account.

  d. restart the computer so that the changes come into force and to check whether the problem is resolved.

  I hope this helps. If the problem persists, you can write to us and we will be happy to help you further.

• port used by another application

  Hi-

  I know that this problem has been posted before about a have people, but when I read the messages and responses, I just get twisted into a pretzel trying to follow links and messages and suggestions that all seem to lead me in all directions. Sorry, but I just get really confused. I tried to do an online chat with a representative of Palm, but the login screen keeps repeating to me again and again for me to fill out my name and repeated info and I seem to be able to connect to their chat agent.

  So here I am. Here's my situation:

  Handheld Tungsten E2 cannot sync via bluetooth to my Windows 7 laptop. I use OS 4.1.4 because screens of download for most recent versions say that they do not work with Windows 7. Also a Palm representative told me that, too. I have synced with great success, through bluetooth, this fall, but have recently undergone a laptop crash, then a breakdown of your handheld. (What a month this has been!) They have all both been fixed but sync seems to no longer work.

  • I have Bluetooth activated and configured as detectable on the handheld.
  • My Bluetooth devices are listed as working in my Windows 7 Device Manager.
  • My Hotsync manager is enabled.
  • I tried setting series and also to the network via the Hotsync Manager in the system tray. No matter what I click in the Hotsync Manager list, I get a message telling me that the Com1 port is not available but the Hotsync Manager will open the port when it becomes available. This, of course, never comes to pass.
  • When I attempt a Hotsync, I'm unable to connect and get the message on my pocket computer that the port is in use by another application.

  Help, please. And please keep it as simple as possible.

  Thanks a LOT-.

  BWalker

  Hello!

  If the reason to use Palm Desktop 4.1.4 are just compatibility concerns then please use 6.2.2.  Palm Desktop 6.2.2 version compatible for Windows 7, especially due to changes MS made 3rd party app data saved.  First of all uninstall PDT 4.1.4 and then install PDT 6.2.2.  This version of Palm Desktop, wouldn't you go through the grind to determine which COM port to use also.  In hotsync Manager, go to connections and check bluetooth.

  After that, go through the process parring on the PC to match the Tungsten E2 again.  HotSync should work correctly this time.

  Just a note that if you use a USB bluetooth dongle sometimes to restart you have to just get out of the hotsync Manager and reopen since Windows could change COM ports on USB devices.