Change Ctrl.Val.Get or binary write format of LV8.5 until 2014

Similar Questions

• Programatically register values of control only works with Ctrl Val.Get all (not recommended)

  Hello

  I just downloaded "programmatically save 86 vi of https://decibel.ni.com/content/docs/DOC-3551 control values.

  This works.  In the recording, but there an invoke with Ctrl Val.Get All (deprectated) node structure of the event.  I thought that I would get rid of the obsolete reselecting the control method get all.  Of course it was more an (outdated) at the end and the top of the page, little changed from pink to yellow.  However when I run and load a file that is saved I get: error 116 took place to Unflatten chain... Possible reasons:

  LabVIEW: Unflatten or stream of bytes read operation was in pain due to corrupted, unexpected or truncated data.

  A few questions:

  If I were writing this thing without having to download the example it wouldn't work.  Any ideas how I would work in LabVIEW 2011?

  The example is quite old, people would use another method of loading and storage of the parameters in a VI these days?

  This VI crashes after a while.  Is it because he has two event Structures in a loop or because there is no case of timeout or what? (I am not really concerned about why it crashes but if someone knows the answer without wasting time running it I'd appreciate it)

  Thanks for the tips, things that I can draw from this

  The old ways worked with a data type that was {name, type descriptor, flattened data}. The use of new methods {name, variant}, to adapt the code to work with this data type. Also, you cannot use the old data with the new code files.

  I'm assuming that the VI is lock because you have two structures of event in a loop simple (it would make sense, since each structure must wait for an event is to occur), but I'm not the code itself, I can't be sure.

  With respect to the other options, I generally without saving all the controls on a front panel, but when I want to record a bunch of controls, I usually use something like this, which can also work if you collect all the controls of the FP. There are also links to other similar things in the more 'like this' section with the page.

• CTRL val get reference returns zero refnum

  I use 'ctrl val get' in a vi.  The value it gets is a bunch of references, the references are returned with a value of zero.  Is there a prohibition against the use of 'ctrl val get' by references?

  Adde a probe earlier to see what Ref was not valid.

  Ben

• How to use ctrl val.get on a Subvi running?

  Hello

  I try to use the Val.Get of control 'Node to invoke' method on a Subvi running to get the values of certain controls to display in a tab. Does she not get the value of the control, it is not updated during the Subvi execution. This particular Subvi displayed a few temperature readings (because now it is just connected to a generator of random numbers for debugging reasons). I have attached my files and I'd appreciate any help I can get. Ultimately the purpose of this exercise is to display a large number of readings of temperature on several tabs with the tab before showing some summary information.

  Thanks in advance,
  Chad

  Try something like this...

  

• CDATA section get lost during the storage of data in binary xml format

  Hello

  If anyone has found any documentation that once you store XML to binary xml format, it will not save CDATA tags? What is the expected behavior or a bug?

  for example, you have an instance xml like this:

  < foo > <! [CDATA [this is CDATA-content]] > < / foo >

  but once save you it in a table that stores this XMLType instance as binary xml, it is what is returned:

  < foo > it is CDATA content < / foo >

  Anyone can shed some light on this?

  Best regards

  Jürgen

  What is your version of the database?

  I reproduce on 11.2.0.2 or 11.2.0.3:

  SQL > create table xmltype tmp_xml

  xmltype store 2 as securefile xml binary;

  Table created.

  SQL > insert into tmp_xml values)

  xmlParse 2 (document ' ')

  3  );

  1 line of creation.

  SQL > select object_value in the tmp_xml;

  OBJECT_VALUE

  --------------------------------------------------------------------------------

• BMP bmp binary &amp; write on MacOSX

  Hello world

  I have two questions for you!

  First of all, I need to convert a bmp to binary file.

  What I'm supposed to do is: open the thread bmp with a file, unflatten dialog, to use it for other animals (convertir convert in grayscale, using a median filter, etc.), and after changing the it, I would like to save it. So I used the flatten pixmap vi and vi of the bmp file writing. But here's my problem: he always write the new txt file, and not bmp! :/

  Second question: I would like to convert the same bmp in binary file. I know how to get from binary to bmp, but not vice versa.

  Any help ?

  Thanks for all!

  Valentine

  (If you need more information, just tell me!)

  Convert just a file that is located in a specific location means that you can follow the code below

  

  But I'm not sure the MacOSX.

• Get the binary content of a file

  Hello

  can someone help me get the binary content to the format string of any file passed as an input.

  IM new to the Blackberry Java development so please help me with this.

  Any help would be appreciated.

  Thank you & best regards

  I found the solution.

  I used two different functions to get the binary and hexadecimal representation respectively

  These two functions are:

  
  // function that returns binary data of file
  
  public String getBits(byte b)
      {
          String result = "";
          for(int i = 0; i < 8; i++)
              result += (b & (1 << i)) == 0 ? "0" : "1";
          return result;
      }
  

  // function that returns hex data of a file and writes it to another file
  
      public static String byteArrayToHexString(byte[] b) {
  
          int len = b.length;
          char[] s = new char[len * 2];
  
          for (int i = 0, j = 0; i < len; i++) {
            int c = ((int) b[i]) & 0xff;
  
            s[j++] = (char) HEXBYTES[c >> 4 & 0xf];
            s[j++] = (char) HEXBYTES[c & 0xf];
          }
  
          DataOutputStream os = null;
          FileConnection fcon = null;
          try {
  fcon = (FileConnection)Connector.open("file:///store/home/user/hexfeatures.txt",Connector.READ_WRITE);
  
              fcon.create();
              os = fcon.openDataOutputStream();
              os.writeChars(new String(s));
  
              os.close();
              fcon.close();
  
          } catch (IOException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
          }
  
          return new String(s);
        }
  

  Thank you & best regards

• Call data from Ctrl: Vals node

  I am trying to extract the individual elements of the Ctrl Vals invoke node.

  The front of the VI being called is a string and 4 double rooms:

  

  I am calling the VI and try to read the values as follows:

  

  The error I get is:

  

  Could someone please explain what I'm doing wrong here?  I want to just correct the 5 variables from the front of the VI (string and 4 double rooms).  I try to extract it as a cluster only because that context-sensitive help mentions that data Variant is a cluster.  I would ideally unbundle this as well, but I can't even the cluster again.

  The code is also incredibly simple, so I attached the VI.  If someone wants the acutal VI, I can attach it to a future post.  Everything I do called two nodes Invoke to run then get the values of the façade.  And finally try to extract the variables based on Variant type.

  The data type of "val Ctrl. Get all the ' is an array of clusters containing ctrl name (String) and ctrl (option) value.

  You can not (AFAIK) convert these data directly to a cluster of string and double rooms.

  Are the names (labels) and the called VI controls fixed and known data types? If they are, you can select each by name and convert the correct data type.

  I once stumbled on a VI (openG, I believe) who would get the data type of a Variant, but I can't find right now...

• I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

  I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

  Yes, I have the same problem. Silverlight 4 does not work in Firefox 14.0.1. Used to use only "restarting in 32-bit mode", but now, who is caught in a loop without end. Silverlight 5 will work, but the video is choppy so badly that it is very bad. I think it's a fall frames in all directions.
  Someone needs to fix this problem yesterday.

• analyzes a document to my PC in read/write format

  How to scan a document from my printer to my PC in read/write format?

  Hi melvindeakins,
   
  -What version of the operating system are you using?
  -What is the brand and model of your printer?
   
  To scan a document, you must have a scanner. If your printer is an all-in-one printer that includes the scanner but also printer, you can use the same.
   
  If you use the Windows 7 operating system, see this article for more information:
  Scan a document or photo with Windows Fax and Scan

• Pavilion DV6 s/n CNF0272P4W: internal (601) CR2032 battery changed but still get the alarm

  Alarm began some time ago. Enter laptop makes at startup, ok. Internal battery changed but still gets the same alarm.

  Battery type CR2032. Ran that test battery had failed Id 6C757T-5417NN-XD003G-C0BX03 primary SCHOOL.

  Bought the dv6 2010.

  Hello

  First error 601 internal battery is not for the RTC battery, it's for the main battery. You need to perform a test, if you need to replace the main battery.

  http://support.HP.com/au-en/document/c00821536

  Kind regards.

• How can I change password to get into my computer? I am now in my computer, but want to change for the next time I open it.

  How can I change password to get into my computer?  I am now in my computer, but want to change for the next time I open it.  Thank you.

  Click Start, click your account at the top right picture, click on 'change your password '. You must then enter the old password and a new.

• After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  Molloy10 wrote:

  After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  What changes?

  What program?

• Need to change size of font in Acrobat pdf format

  Need to change size of font in Acrobat pdf format

  You can change the font size of the PDF content in Acrobat 11. Using the text tool & Images change happens "Edition content" accordion pane 'Tools' to invoke Edit and do what is necessary.

• When I create a rectangle, I can not not change the shape of a rectangle with the cursor in illustrator CC 2014 for what?

  When I create a rectangle, I can not not change the shape of a rectangle with the cursor in illustrator CC 2014 for what?

  Xavigarcia,

  I'm afraid that have met you the Rectangle Live bug that is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587