Change IMEI and Participation of MFN

Similar Questions

• Service (search) and N ° imei and empty Modem firmware

  Hello world.
  I use the iPhone 6 more. This morning, I used like normal, but he has a problem while I'm closing 4G data it shows not the search in the bar service.
  I tried to restart the phone with Home & power button, also I tried to reset the setting also but it stays the same. I was getting ready to restore in iTunes but when I check the imei number, it's no imei in the list and Modem Firmware is empty. But the phone still as usual as the Wifi and the application that it no service does not (research).

  My question:

  1. How can I retrieve the Imei and the Modem Firmware number and use it as usual?
  2. now my phone it works always, what will happen if I try to restore or upgrade to new iOS in iTunes?

  Please help me solve this problem. I really really sad and don't know what to do now! also, I have no money to change :-(

  Hello

  If your SIM card has been blocked, check with your network provider?

  See you soon

  Brian

• The batch change date and time

  I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

  When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

  Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

  Any guidance would be greatly appreciated.  Thank you.

  Just delete the text "" * minutes ' in the lines where the date is changed. "

  Then time will be incremented seconds.

  For example, for the first version of the script use:

  the value timeIncrement to 1 - increment of time in seconds

  (* select at least 2 images in Photos *)

  say application 'Photos '.

  activate

  game imageSel for (get selection)

  if ({ is } imageSel) or (the length of imageSel < 2) then

  error "Please select at least two images."

  on the other

  defined first_image to the point 1 of the imageSel

  the value first_date to (the date of first_image) as date of

  Repeat with I from 2 to the County of imageSel

  put next_image to the point I of imageSel

  the value next_date to (the date of next_image) as date of

  the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

  say next_image

  the value le Date of next_image to (next_date + time_difference) as date of

  end say

  end Repeat

  end if

  return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

  end say

  
  

• Hotmail has suddenly changed appearance and now present on the top of the page blue with lines. I have a screenshot...

  Run Firefox 15.0. Hotmail has suddenly changed appearance and my page is not at the bottom of the screen. The top 5/6 of the page is a series of horizontal blue stripes. Text in the blue section is the Windows Live titles such as ' home, Mobile devices, etc. When I try to compose a new message, text in the blue box partially covers the 'To' button, so I need to position the slider at the bottom of the button to enter an address. I have tried Hotmail in IE and it seems fine, so it must be a problem of compatibility between Hotmail & Firefox. Hotmail has not responded to my questions by e-mail. I could understand that if this happened at the beginning of a session, just after I have lights, but this happened after, I had been active in Hotmail and other sites. Other sites are not affected, just Hotmail and only in Firefox.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Already tried safe mode?

  • https://support.Mozilla.org/KB/safe+mode

• Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Anyone know how?

  Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Someone knows how, I could not find where it change?

  See http://kb.mozillazine.org/browser.cache.disk.parent_directory

  You can also install portable Firefox version, if you want to run Firefox on a disc of SS.

  • http://PortableApps.com/apps/Internet/firefox_portable

• When I download a game it will not work the screen just keeps on changing color and color stripss

  When I supported a game it will not run the screen just keep changing colors and strips coloued

  Hello

  Please try to install the game in compatibility mode.  Here is some information that can be very practical...

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  -Check the functionality of the game under a spare user account

  Uninstall/reinstall the program

  -Clean Boot http://support.microsoft.com/kb/331796

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.

• I put the e-mail shortcut key to open Gmail, but it turns into Hotmail whenever I start my computer. I go to options and it is on Gmail, I click on it but do not change it and it works fine until I restart. That is what it is? Thank you!

  I put the e-mail shortcut key to open Gmail, but it turns into Hotmail whenever I start my computer. I go to options and it is on Gmail.  I click on it but do not change it and it works fine until I restart. Everything else works fine. That is what it is? Thank you!

  gezer2u,

  Try to record your username, then back in then try to restart your computer and see if the problem still persists.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• WAP54G continues to change SSID and security

  Hi all

  I have problems with my access points. They continue to change SSID and security. Nobody is reseting them. I already changed the password.

  Here is the screenshot of the SSID page:

  http://img276.Imagevenue.com/img.php?image=90322_pearl_lane_access_point_screenshot_122_486lo.jpg

  And here's the screenshot of the Security page:

  http://img175.Imagevenue.com/img.php?image=90743_pearl_lane_access_point_screenshot_2_122_443lo.jpg

  I have to update firmware? All entries?

  I appreciate your help. Thank you very much!

  Yes. You can "press" the button ITS on the web interface to the wireless page.

• I was about to change username and typing of accident the "locked" button, how to unlock?

  I was about to change username and typing of accident the "locked" button, how to unlock?  Using Windows Vista.  Thank you

  Hello

  • What do you see on the screen?
  • It requires a username and password?

  To "unlock" a computer, you simply press your ctrl + alt + delete simultaneously and enter the password of the user account.

  If you are not able to enter a name (and a blank password), then press the power button on the computer.  If it does not close on its own, you may need to hold the power for 10 seconds or more.

• change router and wireless network

  After I change provider and wireless router my wireless printer won't connect and print wireless will print with cable but not wireless. What should I do to fix this

  Hi floats,

  You will find that this document contains instructions to install the product in a wireless network using an access point , such as a router . This type of network is called an infrastructure network. HP recommends the type of network infrastructure for a wireless connection to your product.

  Follow the steps outlined in the document below and let me know how it goes?

  http://support.HP.com/us-en/document/c02213840

• Cannot change programs and features "Let Windows manage"

  I changed my programs and features for best performance when it has been set to let windows manage now I can't change it back keeps saying change admin and I am the administrator how to change it back

  Hi hadonly1son,

  1. What is the full and exact error message?

  2. tell the settings of Visual effects for the appearance and performance of Windows.

  3. you remember to make changes to the computer, after which the issue started?

  Try the following:

  Step 1:

  Temporarily disable the antivirus on the computer running software and check if you are able to change the settings:

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Try to create the new user account and check if it helps. If the new user account works, then try to fix the damaged user profile.

  Create a user account

  Difficulty of a corrupted user profile

  I hope this helps.

• Activation of Windows Vista after changing motherboard and processor

  I bought a HP Pavilion Slimline PC (HP S3500z) with AMD Athlon Dual core, online from HP in the United States during the year 2008, which is preloaded with Windows Vista Home Premium. I did the recovery also disks at this time.

  In May 2009, I came to the India and the PC was fine. This year, in October 2010, the PC has suddenly stopped booting and after discussing the nature of the problem with the HP online support, it was concluded that the motherboard has gone wrong.

  I tried to locate to the motherboard, but it is not available and there are size constraints associated with the motherboard that can be mounted in the slimline PC... FINALLLY I could not well the same motherboard.

  Now, I have no option but replace the motherboard and the processor from Intel to make...
  But after the replacement of these two main components: the Vista downloaded on my PC will not recognize them and would require again activation...

  I have not yet changed components and require the guidance on how to make this change followed in reactivation...

  Please give information about the problem as early may so I'd go head and do what is necessary...

  Thank you and best regards

  ajai_x

  When you change the motherboard, you lose all rights to the OEM installed Vista OS.  It is called "tattoo" by HP and is a license agreement with Microsoft. Your only solution is to buy a version of the OS and sure, format the drive to lose all data. The only other alternative would have been to contact HP and ask questions on a refurbished motherboard, or a Board that is in the same group family who would accept the OEM license.

  Concept of tattoo HP: http://forums.techguy.org/hardware/449361-hp-motherboard-tattoo.html

• What changes hardwear and software stop working playready

  What changes hardwear and software stop working playready? I don't want reformat my drive again and reinstall windows because of this problem of playready.

  Thank you

  (1) use the http://support.microsoft.com/kb/976590 ResetDRM to reset your PlayReady DRM

  (2) run Windows Media Center. Update of PlayReady through tasks, settings, TV, TV Signal, PlayReady update.

• My asus computer continues to change time and date

  My ASUS U50F/Windows 7, 64 bit version continues to change time and date. Sometimes he changes a day, sometimes is two or more days to come, but after a few months, it resets the date back to 2009. It seems that a lot of people have the same problem as me. Some suggest it is the BIOS battery, but that's not the problem. I got my computer some time in 2010, and well enough it has been the same since.

  Sometimes, the problem is more common, and sometimes it goes on for a few months without at all what's happening.

  Any input will be greatly appreciated, but please don't say I need to change the BIOS battery, cause it is not the problem.

  Thank you

  Hi Edward Aguilera,.

  Try the steps suggested by Kevin D Souza from this link and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/date-and-time-keeps-changing-in-Windows-7/b2a07875-CACE-48af-9a4f-47210ad430b6

  Response and let us know the status.