change map route on mac

On a road that I want to take, maps on my Mac has proposed three alternatives. One is out of the question. My favorite is one combination of the other two. How can I combine these two routes. ?   I like the fact I can plan the trip on the mac, then send directions to the iphone.

You can choose from the given options. If you want another road, the only thing you can do is to drop a PIN at the junction and save it as a favorite. Go to the favorite, then ask to navigate to the destination. Or, don't follow the directions, and continue on your desired route. He probably réacheminera you the meaning you want.

Tags: Mac OS & System Software

Similar Questions

  • Why some of my contacts have a field called maps on my Mac and iCloud, but some cards don't.

    Why some of my contacts have a field called maps on my Mac and iCloud, but some cards don't.

    It is possible to customize the fields for each contact in edit mode. Just click any empty field on the up/down icon next to it.

    If you have not created these custom contacts fields, you may have imported contacts?

  • How to change shortcuts on a mac?

    How to change shortcuts on a mac? As the order is spotlight, is it possible to change this?

    System Preferences > keyboard

  • Have changed my router but Airport Express no longer works.  How can I connect it?

    Have changed my router but Airport Express linking is no longer.  How can I connect it to the new router?

    The Express has been programmed to keep in memory the settings needed to connect to your 'old' router... What is more there... so the Express is lost and knows not how to find his way.

    The solution is to reset the AirPort Express Terminal at its new, out of box factory settings, so it can be mounted again do not forget to connect to your new router.

    To do this...

    Turning off the AirPort Express for a minute or two

    Hold the reset button the first Express... and keep holding it while you simultaneously reconnecting the power cord the AirPort Express

    After that the amber light was clignoter blink quickly for 5 to 6 seconds, release the reset button

    Allow a minute for the Express start slow, flashing amber light status

    Now, the Express is back in its new factory settings, then you a game it upwards again to connect to your new router... just like you put in place to connect with your old router.

  • HP Officejet 7612 large format: HP7612 will not print after change of router

    I just changed my router a router Orange Virgin

    Wireless printing was good before but now do not print.

    The printer wireless network test results show all works well, but it will not be printed

    All advice welcome

    Reinstall the drivers and full software again.

  • No Wireless Connection and can not only change the router

    I have messed around with my router configuration to try to make my NAt type open and somehow messed up the Internet. I set kind of it and now I can connect to the internet if I connect directly to the router but I can't always have a wireless connection and I also can't change the router setting more? I followed the steps back to get my ip address and it used to be 192.168.1.1, but now his 192.168.1.2 I don't know what I please help.

    Hi estesblake,

    (1) do you get an error message when you try to access wireless internet?

    (2) what is the number of brand and model of your router?

    Follow the steps outlined in the article below to fix the problem of wireless network connection

    Wireless network connection problems in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab02

    Regarding router problem check the documentation that came with the device or contact the manufacturer of the device.

  • I have a HP Deskjet F4580 3 years, worked to change the router.

    I have a HP Deskjet F4580 3 years, worked well to change my router yesterday. Since then the blue wireless button flashes just power and I can't "add device" on the new network.

    All thoughts

    Replacement of your wireless router try here.

    http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  • Change from windows to mac, how can I get the programs I bought for windows?

    Change from windows to mac, how can I get the programs I bought for windows?

    HAV photoshop loose 11 for my windows computer but I have now bought a mac. I can do something to get the program, I have to convert it to mac?

    Hello

    Please see a product for another language or version of trading platform

    Hope that helps!

    Kind regards

    Sheena

  • I have a license for adobe design standard cs6 for windows, but I would like to change that to a mac license. Is this possible?

    I have a license for adobe design standard cs6 for windows, but I would like to change that to a mac license. Is this possible?

    Hello

    The following link should help:

    Exchange a product for a different version of the language or platform

    Thank you

    Varun

  • CS6 design & web license for windows changing in CS6 for mac?

    I ' have the problem that I changed from windows to mac. Before 3 years, I bought CS6 design & web for windows!

    Now, I changed for mac and want to use my license. Is their opportunity?
    Please help me

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

    Mylenium

  • Lost cd CS4, need to change from PC to MAC

    Hello, I lost my cd for Photoshop CS4. I need to change from PC to MAC! where can I download the program?

    License CD was only good for installation on a PC.  CS4 is too old to cross-grade to a Mac version.  Cross-grades are allowed for the most recent version (CS6).  You can also subscribe the creative cloud where the two platforms are planned with the same subscritpion.

  • I changed from pc to mac and photoshop elements 2.0 disk won't install on mac

    I changed from pc to mac and photoshop elements 2.0 disk won't install on mac

    Photoshop Elements 2 must be very old software and is not likely to be compatible with the new machine, you may have acquired, pc or mac.

  • Changes in the incoming packets to address SG300 inter - VLAN routing and MAC

    Hello

    I SG300-20 operates in Layer 3 mode

    Vlan1 is not used

    Gateway Internet is VLAN211

    Customers are in other VLANs

    Switch is the default gateway for clients and itself has internet gateway as default route.

    The switch MAC address is XX:XX:XX:XX:XX:63

    When the client sends traffic destined for Internet MAC address in outgoing packets is XX:XX:XX:XX:XX:63

    But in incoming packets the source MAC address is XX:XX:XX:XX:XX:69

    Why change? And how can I set the switch to use MAC XX:XX:XX:XX:XX:63 address?

    I finished the event and found that it does not change as expected. When you use the switch to Layer 3, routing, with or without him as your default gateway, it will happen.

    I tested two different VLAN in two different ways, and every time that I ping via the switch to a different subnet, the MAC source on the return package was different on the last two. This is due to the fact that the return traffic through a different interface on the switch.

    Currently, there is no option to change this.

  • DMZ-Link bandwidth does not change the routing table countin traffic

    Hey guys

    I'm INE laboratories dong and shoved a weird one that delivers.

    I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.

    Here is my configuration:

    Rack1R6 (config) #do sh run | dry BGP

    router bgp 100

    no synchronization

    The log-neighbor BGP-changes

    BGP dmzlink-bw

    155.1.146.0 netmask 255.255.255.0

    aggregate-address 155.1.0.0 255.255.0.0 summary only

    neighbour 54.1.1.254 distance-54

    neighbor 54.1.1.254 dmzlink-bw

    neighbour 155.1.67.7 distance-300

    neighbour 155.1.146.1 distance-100

    155.1.146.1 neighbor send-community times

    No Auto-resume

    Rack1R6 (config) #.

    Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    Version of BGP table is 35, local router ID is 150.1.6.6

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 54.1.1.254 0 54 I

    * > 28.119.17.0/24 54.1.1.254 0 54 I

    * > 112.0.0.0 54.1.1.254 0 0 54 50 60 I

    * > 113.0.0.0 54.1.1.254 0 0 54 50 60 I

    * > 114.0.0.0 54.1.1.254 0 0 54 I

    * > 115.0.0.0 54.1.1.254 0 0 54 I

    * > 116.0.0.0 54.1.1.254 0 0 54 I

    * > 117.0.0.0 54.1.1.254 0 0 54 I

    * > 118.0.0.0 54.1.1.254 0 0 54 I

    * > 119.0.0.0 54.1.1.254 0 0 54 I

    r > 155.1.0.0 0.0.0.0 32768 I

    Rack1R6 (config) #do sh ip bgp

    Version of BGP table is 35, local router ID is 150.1.6.6

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * i28.119.16.0/24 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254                             0 54 i

    * i28.119.17.0/24 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254                             0 54 i

    * i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I

    * > 0 0 54 50 60 54.1.1.254 I

    * i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I

    * > 0 0 54 50 60 54.1.1.254 I

    * i114.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i115.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i116.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i117.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i118.0.0.0 204.12.1.254 0 100 0 54 I

    Network Next Hop path metrics LocPrf weight

    *>                  54.1.1.254               0             0 54 i

    * i119.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    r i155.1.0.0 155.1.146.4 0 100 0 I

    r>                  0.0.0.0                            32768 i

    s > 155.1.146.0/24 0.0.0.0 32768 0 I

    * > i205.90.31.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    * > i220.20.3.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    * > i222.22.2.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    Rack1R6 (config) #.

    # now R4 configuration

    Rack1R4 (config) #do sh run | dry BGP

    router bgp 100

    no synchronization

    The log-neighbor BGP-changes

    BGP dmzlink-bw

    155.1.146.0 netmask 255.255.255.0

    aggregate-address 155.1.0.0 255.255.0.0 summary only

    neighbour 155.1.45.5 distance-200

    155.1.45.5 route-neighbour card GAME-54 on

    neighbour 155.1.146.1 distance-100

    155.1.146.1 neighbor send-community times

    neighbour 204.12.1.254 distance-54

    neighbor 204.12.1.254 dmzlink-bw

    No Auto-resume

    Rack1R4 (config) #.

    Rack1R4 (config) #do sh ip bgp Synt.

    Local router BGP 150.1.4.4 identifier UNDER number 100

    BGP table version is 18, table 18 main routing version

    15 entries for network using 1980 bytes of memory

    18 entries for path using 936 bytes of memory

    9/7 BGP path/bestpath attribute entered using 1512 bytes of memory

    3 entries for BGP AS-path ACCESS using 72 bytes of memory

    1 entries PMO community, using 24 bytes of memory

    0 cache entries of BGP route-map with 0 bytes of memory

    0 cache entries of filter-list BGP using 0 bytes of memory

    Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory

    BGP using 4620 total number of bytes of memory

    Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds

    Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd

    155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3

    155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3

    204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10

    Rack1R4 (config) #do sh ip bgp

    BGP table version is 18, local router ID is 150.1.4.4

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 204.12.1.254 0 0 54 I

    * > 28.119.17.0/24 204.12.1.254 0 0 54 I

    * > 112.0.0.0 204.12.1.254 0 54 50 60 I

    * > 113.0.0.0 204.12.1.254 0 54 50 60 I

    * > 114.0.0.0 204.12.1.254 0 54 I

    * > 115.0.0.0 204.12.1.254 0 54 I

    * > 116.0.0.0 204.12.1.254 0 54 I

    * > 117.0.0.0 204.12.1.254 0 54 I

    * > 118.0.0.0 204.12.1.254 0 54 I

    * > 119.0.0.0 204.12.1.254 0 54 I

    * > 155.1.0.0 0.0.0.0 32768 I

    s > 155.1.146.0/24 0.0.0.0 32768 0 I

    * i205.90.31.0 155.1.13.3 0 100 0 200 254?

    *>                  155.1.45.5                             0 200 254 ?

    * i220.20.3.0 155.1.13.3 0 100 0 200 254?

    *>                  155.1.45.5                             0 200 254 ?

    * i222.22.2.0 155.1.13.3 0 100 0 200 254?

    Network Next Hop path metrics LocPrf weight

    *>                  155.1.45.5                             0 200 254 ?

    Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    BGP table version is 18, local router ID is 150.1.4.4

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 204.12.1.254 0 0 54 I

    * > 28.119.17.0/24 204.12.1.254 0 0 54 I

    * > 112.0.0.0 204.12.1.254 0 54 50 60 I

    * > 113.0.0.0 204.12.1.254 0 54 50 60 I

    * > 114.0.0.0 204.12.1.254 0 54 I

    * > 115.0.0.0 204.12.1.254 0 54 I

    * > 116.0.0.0 204.12.1.254 0 54 I

    * > 117.0.0.0 204.12.1.254 0 54 I

    * > 118.0.0.0 204.12.1.254 0 54 I

    * > 119.0.0.0 204.12.1.254 0 54 I

    * > 155.1.0.0 0.0.0.0 32768 I

    * > 205.90.31.0 155.1.45.5 0 200 254?

    * > 220.20.3.0 155.1.45.5 0 200 254?

    * > 222.22.2.0 155.1.45.5 0 200 254?

    Total number of prefixes 14

    Rack1R4 (config) #.

    # and where is the real problem, R1

    Rack1R1(config-Router) #do sh ip bgp

    Version of BGP table is 15, local router ID is 150.1.1.1

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * i28.119.16.0/24 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i28.119.17.0/24 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I

    * > I 204.12.1.254 0 100 0 54 50 60 I

    * i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I

    * > I 204.12.1.254 0 100 0 54 50 60 I

    * i114.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i115.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i116.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i117.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i118.0.0.0 54.1.1.254 0 100 0 54 I

    Network Next Hop path metrics LocPrf weight

    * > I 204.12.1.254 0 100 0 54 I

    * i119.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i155.1.0.0 155.1.146.6 0 100 0 I

    * > I 155.1.146.4 0 100 0 I

    * > 205.90.31.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    * > 220.20.3.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    * > 222.22.2.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0

    112.0.0.0/8, version 4 BGP routing table entry

    Paths: (2 available, best #2, table by default-IP-Routing-Table)

    MPIO: eBGP iBGP

    Announced for the update-groups:

    1          2

    54 50 60, (from a customer-RR)

    54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)

    Origin, IGP, 0, 100, valid, internal multipath localpref metric.

    DMZ-Link Bw 250 KB

    54 50 60, (from a customer-RR)

    204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)

    Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best

    DMZ-Link Bw 12500 KB

    Rack1R1(config-Router) #do sh ip route 112.0.0.0

    Routing for 112.0.0.0/8 entry

    Known through 'bgp 100', 200, 0 distance metric

    54, internal type tag

    Last update of 204.12.1.254 ago 00:15:30

    Routing descriptor blocks:

    204.12.1.254, 155.1.146.4, there is 00:15:30

    Path metric is 0, number of shares of traffic 1

    AS hop 3

    Beacon road 54

    * 54.1.1.254, 155.1.146.6, there is 00:15:30

    Path metric is 0, number of shares of traffic 1

    AS hop 3

    Beacon road 54

    Rack1R1 (config - Router) #.

    as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...

    can you please help me if I makeover anything in my setup?

    Hello

    Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.

  • Change the keyboard for Mac

    I need to change keyboard for mac

    			 

    pleas

Maybe you are looking for