Change name of 12 c earpiece Windows Service - OracleOraDb12cTNSListener

Similar Questions

• Error: ' Service Pack has not been installed. Restoration of the changes. Not turn off not computer. "unable to install Windows Service Pack 2."

  Original title: cannot install Windows Service Pack 2.

  I tried to install Windows Service Pack 2 and you know how when you lock your laptop, it's how he like to appear. Service pack filed to install, so now have him, he said, 'Service Pack was not installed. Restoration of the changes. Do not turn off computer. "I'm not going to let me at all to connect to my computer... Alls for this is restarts by itself and when it turns on, it says the same thing. I already tried to remove the battery and leaving out the laptop for a little while and then when I put the battery in and re - turn on the laptop, it says the same thing and continues to do exactly the same thing and I'm getting really aggravated and crazy. Is there anyway that I can fix it without going through a computer technician?

  Hello

  Have you been able to successfully install the other updates?

  If you have the Windows Vista installation disc, follow this link and check if the problem persists:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  See: How to troubleshoot Windows Vista and Windows Server 2008 service pack installation problems?

  Learn how to install Windows Vista Service Pack 2

  Hope the helps of information.

• Windows Servicing identified that package KB972036 (Update) is not applicable to this system

  How can I get rid of this update? I find only information for the installation of updates failed, nothing on the automatic reception of an update through Windows Update that is not valid for my system.

  Windows Vista Home Pemium Service Pack 2
  HP Pavilion DV6700
  Microsoft Office is NOT installed, only the viewers

  "Windows Servicing identified that package KB972036 (Update) is not applicable to this system"

  "Windows Servicing has not finished the process of change update 972036-11_neutral_LDR of State of Staged (Staged) packaging KB972036 (Update)"

  Log name: System
  Source: Microsoft-Windows-maintenance
  Date: 2009-09-02 10:52:50
  Event ID: 4375
  Task category: no
  Level: error
  Keywords: Classic
  User: T24622056-PC\Alan
  Computer: T24622056-PC
  Description:
  Windows Servicing failed to complete the process of the package configuration KB972036 (Update) in install Requested(Install Requested) State
  The event XML:
  
   
     
      4375
      0
      2
      0
      0
      0 x 80000000000000
     
      103100
     
     
      System
      T24622056-PC
     
   
   
     
        KB972036
        Update
        Install requested
        Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0
        Installed
        True
        0 x 80070643
        Fake
       
       
     
   
  

  Hi BrechbieIAD,

  Welcome to Microsoft Vista answers Forum!

  I have a few here that might solve the problem.

  Step 1:

  You may need to start the computer in safe mode and uninstall the update, follow these steps to start the computer in safe mode:

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

  See the link: http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  Step 2:

  Now, you may need to delete the contents of the download on your system folder, follow these steps:

  Click Start > type download in the start search > delete the folder KB972036.

  Step 3:

  Now, run Windows Update and allow to install KB972036.

  After Windows Update has finished reboot normally and everything should be fixed.

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• scammed by windows service center

  I have just been scammed by the so-called Windows Service Center. I stupidly that they have control of my computer by remote access, and then when they started asking for money to fix it, I said I could not payt eh $300 they then said that I could do a Bonu $ 20! by Paypal, but I would not type in my paypal password. Then, she said she couldn't helpme but the recall on this number 03-9001-8830 in Melbourne when I didn't use their service. I had dialed the number on another phone and he did respond by Windows Service - but that they were scamming.  I am now reallyworried that they can again access my computer... after they ahd remote use of this one. Have I really clogged?  I went and changed my password hotmail frm immediately another computer (that I had while they were line n).  Can't believe I was gullible that I am usually very wary, but they identify problems that we've been a... aargh!  Can someone pls help - I'm so worried! My partner is abroad, and he'll be furious if I caused a big problem. Thanks, Anna

  Hello

  Yes, it's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Its a total scam. Uninstall their software and then perform a system restore before you install.
  Change all your sensitive passwords at all sites - e-mail, Bank, credit cards and others. (Do not
  on the computer compromise and it would be better to do it on the phone or in person.)

  You can even restore your system to factory fresh to make sure their software violates not
  your security. (Ways to re - install Windows Clean - removing everything on the backup drive so all the data
  before hand.)

  ====================================================================
  ====================================================================

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Do not fall for the fake phone Tech Support
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  ===========================================================
  ===========================================================

  Follow these steps carefully:

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• "The process of home for Windows Services

  Why do I get the message that the host process for Windows Services has stopped working and closed whenever I try to start my computer?  What is the host process for Windows Services and what I can do to solve the problem?

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Svchost.exe application error, host process for Windows Services has stopped working

  Original title: Svchost.exe application error [windows loses focus]

  Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

  Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc00000fd
  Offset: 0x0000000000018e3d
  ID of the process failed: 0x81c
  Start time of application vulnerabilities: 0x01cd7970b1953fa0
  The failing application path: C:\Windows\system32\svchost.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: efb97cea-e563-11e1-a232-002655497401
  The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
  Thank you for your time.

  Hello

  1. when exactly do you get this error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  Step 1:

  Try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• startWebLogic.cmd as Windows Service

  Hello

  Need help with setting up startWebLogic.cmd as Windows Service and deploy the file (P6.ear) in the console. What are the guides step by step in putting in place this startWeblogic.cmd as service windows and deployment primavera p6.ear file in the console. I only managed until the implementation at the beginning of the weblogic as service windows server, but I'm not able to deploy the file p6.ear primavera in the console. State of the service is only in Mode "start running". It does not change the mode 'active '. Anyone could guide by providing codes? Need help with this area.

  Hello

  I guess when simply run the console P6 deploys very well.

  Once I have it running in the console, here are the steps that I pass by - sorry, it seems pretty complicated, but after you have done a few hundred times it seem too loud that it allows to

  Step 1 - check that Weblogic does not require a name of user and password

  -If you are in development, this is already done and you can proceed to step 2

  -If you use the mode of production, then you want to create a file called boot.properties under C:\Oracle\Middleware\user_projects\domains\P6\servers\AdminServer\security

  * I'm assuming that the following

  * With the help of windows with a patch of default weblogic installation

  * Field called P6

  * You have installed for an AdminServer (I'm sure it would be a very similar process if you did to a managed server)

  * You will very probably create the final folder of 'security '.

  Contents of this file requires

  username = weblogic

  password =

  Save and close this file and rerun weblogic in a console. This time it should not prompt for a name of user and password (there is a reference to boot.properties)

  If you check the boot.properties file after that, you will notice that the username and password are now encrypted.

  End of the weblogic after that session.

  Step 2 - basic Weblogic service configuration

  I want to make some customizations here so that the Windows Service name is logical and the process comes with a name dedicated rather than java.exe or wlsvc.exe (or beasvc.exe depedning on the version of weblogic)

  I'll assume weblogic 12.1 - if you use 10.3.6 the steps are basically the same except beasvc.exe is now called wlsvc.exe

  Step 2 - setting up the files

  Go to C:\Oracle\Middleware\wlserver_12.1\server\bin

  Copy and rename the file wlsvc.exe to be wlsvcP6.exe (just what you rename it, it is what appears in the Task Manager)

  Copy and rename the file uninstallSvc.cmd to be uninstallSvcP6.cmd

  Copy and rename the file installSvc.cmd to be installSvcP6.cmd

  Step 2b - implemented uninstall (I do it for good luck that I hope never to need)

  Edit the file uninstallSvcP6.cmd

  Scroll to the end and fine line which should look like

  '% WL_HOME%\server\bin\wlsvc' - remove - ServiceName: "wlsvc % _ % SERVER_NAME % domain_name.

  Change is:

  "% WL_HOME%\server\bin\wlsvcP6' - remove - ServiceName:"PrimaveraP6. "

  The two changes that we do here is for her to reference the renamed file wlsvc.exe and give it a nice service name in Windows Services

  Save and close the file.

  Step 2 c - implementation of the installation

  Edit the file installSvcP6.cmd

  Scroll to the end and very well the line that starts with

  '% WL_HOME%\server\bin\wlsvc' - install - ServiceName: "wlsvc % _ % SERVER_NAME % domain_name.

  It's changing

  "% WL_HOME%\server\bin\wlsvcP6' - install - ServiceName:"PrimaveraP6. "

  Scroll up to near the top of the file and fine lines

  off @echo

  SETLOCAL

  After that you will want to write the following (change these for your environment)

  Set DOMAIN_HOME = P6

  Set USERDOMAIN_HOME = D:\Oracle\Middleware\user_projects\domains\P6

  Define SERVER_NAME = AdminServer

  Set PRODUCTION_MODE = true

  Set JAVA_VENDOR = Sun

  Set JAVA_HOME=C:\Java\jdk1.6.0_38

  (Sometimes I also put the USER_MEM_ARGS TV as well, but it should not be necessary after that the next step is done)

  The two lines below that all the statmeents SET should be

  Set WL_HOME=D:\Oracle\Middleware\wlserver_12.1

  Call "% WL_HOME%\common\bin\commEnv.cmd".

  It's changing

  Set WL_HOME=D:\Oracle\Middleware\wlserver_12.1

  @rem call '% WL_HOME%\common\bin\commEnv.cmd '.

  call %USERDOMAIN_HOME%\bin\setDomainEnv.cmd

  Basically, we are saying to the service is not to use the P6 areas instead of the default commEnv.cmd file setDomainEnv file

  I usually have to chuck a declaration of break at the end of the file so I can see if it succeeded or not.

  Save and close this file

  Step 3 - installation of the service

  Right-click on the installSvcP6.cmd and run as administrator

  I hope that you will get a message saying that it successfully installed.

  Take a deep breath, cross you fingers and start the PrimaveraP6 service

  Watch for wlsvcP6.exe task manager

  With some luck, after a minute or two you should have race P6 (make sure that you still haven't P6 running in a console window, otherwise it will take place in port conflicts).

  Good luck.

  Concerning

  Alex

• Problem: WebLogic Node Manager under Windows Services

  Hi all
  
  Details of the environment :
  -Windows Server 2008 R2 - x 64
  -Oracle WebLogic Server 11 g R1 (10.3.6.0) - generic
  -Reports and forms oracle 11g R2 (11.1.2.0) - x 64
  -Oracle JRockit JDK R28.3.0 - x 64
  
  I have windows servers that we want managers node and managed to run instances. As you can see I would like to run Node Manager under Windows Services.
  
  I use this guide:
  
  < a link = http://wlsjavatips.blogspot.com/2009/09/how-to-install-node-manager-as-windows.html >http://wlsjavatips.blogspot.com/2009/09/how-to-install-node-manager-as-windows.html< /a >
  
  Create boot.properties that include the user name and password:
  
  - AdminServer (location: < WL_HOME > \user_projects\domains\ < DomainName > \servers\AdminServer\data\nodemanager)
  - WLS_FORMS (location: < WL_HOME > \user_projects\domains\ < DomainName > \servers\WLS_FORMS\data\nodemanager)
  - WLS_REPORTS (location: < WL_HOME > \user_projects\domains\ < DomainName > \servers\WLS_REPORTS\data\nodemanager)
  
  Results :
  1 are you able to automatically start all servers (AdminServer, WLS_FORMS and WLS_REPORTS) after the server restarted.
  2. I can't access to http:// < hostname >: 7001/console, < hostname > http://: 7001/em, http:// < hostname >: 9001/forms/frmservletand http:// < hostname >: 9002/reports/rwservlet
  
  Questions :
  1. on WebLogic Console http:// < hostname >: 7001/console, the status of AdminServer, WLS_FORMS and WLS_REPORTS are running, but the State of health is OK just to AdminServer, and others have no status.
  2. as I said before, I can run my form on http:// < hostname >: 9001/forms/frmservlet and run my report on http:// < hostname >: 9002/reports/rwservlet. But when I found
  on Order FM OEM http:// < hostname >: 7001/em, the State of WLS_FORMS and WLS_REPORTS are down. I can't monitor sessions connected to the server and I can not change the configurations via EM.
  
  Any help is greatly appreciated and sorry for my bad English.
  
  Thank you and best regards,
  
  -Rob-

  Hello

  After a reboot the server I had the same problem, also windows environment. AdminServer but OK/console WLS_FORMS and WLS_REPORTS nothing.

  Process Explorer indicated there are 3 java process for each server that had begun the nodemanager (beasvc)
  Also everything worked very well for end users, but not for the side default where forms and reports where "down".

  I added settings offers and reinstalled the service nodemanger. But always without success.

  Finally I solved it by stopping the servers (WLS_FORMS and WLS_REPORTS) in the / console and by them from the option default (fusion middleware control)

  Everything is 'healthy' and 'OK' again!

  I think that nodemanager and the opmn obtained in a "things are complicated" after the break-up... I mean :) server restart

  Greetz,

  B.

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• Windows Service Pack 2

  When I try to install my windows service pack 2, it will feature do then to halfway through it comes up saying cannot copy file, then it cannot copy the name of the file appears as:

  REDSHD. GIF
  
  So, what can I do because I need to download so that I can get my updated anti-virus up-to-date.  More what this file is and what it means?

  Rhonda

  I was afraid you were going to say that. WinXP SP2 to SP3, should be installed years ago. As it wasn't, you can't possible have been running an application fully functional antivirus for recent years. Here's what you do now:

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  HOW to do a clean install of ofHOW TO do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Do I need a Windows service?

  I have to run an .exe file built with LV, using the Exec VI system. I want the called application to run without front. In the application builder there is no option to hide the front panel.
  How can I solve the problem? Can I create a windows service from the .exe file called that can be invoked from the main application using the system Exec VI? It will be called like any other .exe file?

  BR

  have you checked property vi / appearance of window / custom and set the transparency to 100%

  ?

  also, you can run the time that minimize position and prevent the user to change
  in vi property

• Windows Service Center call me telling me to open my computer windows FRAUD?

  09.30 h, October 30, a guy from the Windows Service Center called me telling me that they call such + 46068059216 Stockholm Sweden. They insist that I should open my Windows computer because it is infected with malicious software and they will be worthy of trust, they will tell me the ID of windows I use. The only person who knows this number is the owner of the PC and a windows technician. I have distrusted the call and looked quickly on the internet and came across these reports.

  What is c? Windows technicians call me or send me an email?
  What is Windows doing about this?

  Hello

  It's a scam.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  We have all the errors and warnings in our Event Viewer

  If you gave them remote access and you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  See you soon.

• If I buy a person's computer and windows is registered in their name can I have register it in my name with the OEM for windows

  If I buy a person's computer and windows is registered in their name can I have register it in my name with the OEM for windows

  If I read your question correctly, this article should solve your problem for you:

  "How to change name and company information after you install Windows XP"
    <>http://support.Microsoft.com/kb/310441 >

  HTH,
  JW

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I received calls from someone in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is corrupted

  Original title: my computer is corrupt and needs fixing!

  I received calls from a person in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is damaged, and they want to help me.  But I have not received any error message on my screen.  When I asked them how they got my number they said it's from the database of Windows. The number they gave me is 02921252715 and when I called the number of the person on the other end told me that they are a company called Windows e-solution, independent company and is not attached to Microsoft Windows.  What should I do?  Are these authentic calls and approved by Microsoft Windows?

  Hello

  Its a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">