Change of address IP of VIP

Hello

Version 11.2.0.3.0

We are migrate a RAC database from one data center to another.

It is necessary that the cluster services are upward when I run the below command:

srvctl change applications - n lxdb999 - a 10.15.16.17/255.255.255.0/PROD_DB

Thank you

CRS should be operational, but you must stop all dependent services.

Stop all services of DB as srvctl stop service d s - n

Stop the VIP address srvctl stop vip - n

Now modify the applications and provide a new IP address.

After this start the VIP - srvctl start vip n

That repeat the same steps on the other node of the cluster and can even be verified using the cluvfy utility.

cluvfy comp nodecon n - verbose

Tags: Database

Similar Questions

  • Changing the address

    Hello

    I recently moved from the Australia to the United States and would like to change my address with my existing Apple ID Pourriez please help me?

    Thank you very much

    Help here > change your iTunes Store country or region - Apple Support

  • Menu offers the choice to send to Evernote; I need to change/update address Evernote to fall down. Address book has changed; not good.

    Thunderbird offers forward for Evernote in the menu dropdown. I changed the address of Evernote in my address book, but it is not captured by the menu drop down. How to upgrade to the front to Evernote address in the menu drop-down?

    It would seem that you have this installed add-on:

    https://addons.Mozilla.org/en-us/Thunderbird/addon/enforward/

    then, to change the address, change it in the preferences of the add-on (Tools/Add-ons/Extensions).

  • When I try to open my address book (collected), it shows only persomal addressbook, which is empty, how to change collected address book?

    I need to access my "collected addresses", but when I open the address book, it shows my "Personalbook', which is 'empty.
    How to change my "address book collected?

    You have the directory pane displayed in the address book window?
    If it is in the menu bar in the address book window, select pane display-in page-directory

    No menu bar? Press the ALT key.

  • I just changed email addresses. TB guard shipping copies of emails to the new address in the old

    I can't find a place where TB directs the emails in any account to a default account. Having just changed email addresses. I have two accounts in my TB program. For every email that I receive, for each account, I get a message saying that he was sent to the old account and is not available, because the ISP has closed this account. How to change or remove this automatic redirection? I have not deleted this account in my list of TB yet, because I'm still working through the files left there to decide whether to move or delete the individual emails. Simply remove this old account to solve the problem?

    You need to sign in to your account via a browser and check your account settings.
    There is no such thing as a "Thunderbird account. Thunderbird is an email client that allows you to retrieve messages from an account that you set up with your email provider.

  • Need to change my iPad in the United States to the United Kingdom as now living in the United Kingdom. Can not change the address or buy in the store.

    Need to change my address in the United Kingdom, the United States, now retired to the United Kingdom and does not apply to make the address change or buy on the Apple Store of UK or download new applications.

    Settings > general > language and region > region > United Kingdom

    I believe that this change will allow you to do what you need to do!

  • problems of change of address

    I'm trying to change my billing address in the iTunes Store.  I have to update my credit card information.  I touch only in and continue the change of address and press ENTER.  Apple says that my card is rejected.  My Bank says it all credit card is fine and has no explanation for the dismissal.  Of course, I can't call someone at Apple and cannot even send them a mail because it isn't on an order number.  As usual, it's the horrible customer of Apple at work service.  Any suggestions on how to fix this since I can't ask Apple directly?  Thank you very much.

    Chuck

    Well, I do not know why you "can not call Apple. At the iTunes link Support options you can choose what you will get to the call/chat support option screen. So, it's not "horrible service", just a misunderstanding on your part about how to use the link and access the service page.

    Insofar as the address change will, if you use the credit card has a different billing address than what you put in, then it will say that it is denied. Is the address on your bank statement exactly identical (in every sense) that you are trying to put in place?

    See you soon,.

    GB

  • How to read the multiple slave devices in a RTU modbus RS485 2-wire network without changing slave address manually?

    Hello

    Currently, I can read data out of multiple using the attached VI DAQ devices by manually changing the address of the slave on the front panel that determines what slave to read the data. However, I want the VI to do it automatically for me instead of me manually by clicking on the buttons on the front panel to change the address of the slave. In other words, the VI should read data off devices 3 slaves and save them to a database of all the 1 second (sampling from 1 sec interval). I tried to use the structures of the case, timed sequences and delays, but I'm still not able to get what I wanted. My current VI is a modified version of a VI library modbus - 'MB series Master query read input registers'. No idea how to do this?

    IM pretty new to LabVIEW, so don't kill me if im away here

    Could replace the cluster 'Series settings' with the attached structure solve this problem?

    The real deal will be just the value back to the default (1).

    -Tom

  • Difficult to change IP address in WRT160N

    I am trying to use my 160N as access point and I read on the Linksys site on how first, replace address IP 192.168.1.2 and then disable DHCP and save the changes.  The 160N is plugged into my laptop (address IPv4 192.168.1.100) and the laptop is not connected wireless to any other network.

    After I saved the changes, the next screen says "change successful" and then I hit the continue"" button.  There is a 20 second pause.  The bottom of the screen shows the laptop tries to connect to the new IP address, but cannot. I started from.  I try to reconnect to the configuration using the new IP address page, but can't.  I use the old (default) IP address and still not get the configuration page.  I have reset the router 3 times do the same exact process and get consistent results.  Linksys, I called and they told me that I had to change the third digit and not the last number to avoid any conflict of IP so I tried without success.

    Why can't I change the IP address?

    1. disconnect the E3000 WRT.
    2 wire a single computer to the WRT.
    3 reset the WRT by pressing the button of reset for 30 seconds.
    4. open the web interface at http://192.168.1.1/
    5. change the address LAN IP of 192.168.1.1 to 192.168.1.2.
    6 turn off the DHCP server.
    7. save the settings.
    8 disconnect the computer from the WRT.
    9. wire one of the LAN ports of the WRT to the E3000.
    10. connect your computer to the E3000. Try opening http://192.168.1.2/

    If this does not work, open a command prompt window and type "ipconfig/all". After the output full.

    In addition, make sure you have a working internet connection on the computer without worrying if it is connected to the E3000 or the WRT.

  • Change default address "scan to network" on C2665dnf

    I had a successful address configuration "scan to network" of the LCD screen of my C2665dnf for a notebook of Windoze. The laptop has changed, new name, new address. I changed the address in the address book server and it works for scanning.

    However, whenever I select "network analysis" of the screen LCD, "pre-selected" default address is the old laptop that no longer exists. I have to go to select the correct laptop from the address book each time - what works, but it is a bit of a pain.

    No idea how to reset default 'scan to network' to be a different address?

    This sort end account - not very intuitive, but you must select the address you want, and then change the scan settings to and then click on the "Save" button. This saves the scan to settings, including the path of the server chosen as default for this icon on the LCD screen. The main thing was to save, even if you make no changes to the settings (except the server).

    Once I had worked to this point, I was able to create a new icon with different parameters (scan in PDF format, for example), then now simply just choose the correct icon for the work.

  • I need to change the address of that my developer PlayBook is shipped... Someone has an idea how to do this?

    I wasn't expecting the PlayBooks free to hold out long enough to ship.  Now that it appears that I will not mine get until the first week of may, I need to change the address that mine will be available so that I can travel.  I'm afraid that when the mine is sent, my mailing address has changed.

    Those of you who have had correspondence with the ideas of TGM, who would be the best person to contact to get my mailing address has changed?

    Thanks for your time!

    Just reply to the E-Boutique online order-mail you received and tell them to change the delivery address.
    It is done a few days previously and received confirmation about two days later.

  • NAC and change IP address

    Hi all

    We use NAC OOB, L3, gateway real IP with AD - SSO. When users connect to the computer, the PC is supposed to change the IP address after the authentication with the windows user account. But based on security policy, users cannot change the IP address, in order to change the IP address will be failed. There is no work around for this issue? should we change our security policy and allow users to have right to change IP address?

    in this case, what security in GPO to change to give them permission to do "ipconfig / renew" purchase order?

    any suggestions would be much appreciated.

    Thank you

    Alex

    You must install the heel first with admin rights. Then once that the user connects with its own rights (not administrator) and he needs to do anything administratively (like change the IP address), the agent asks the stub to do and it works.

    Click on the link I sent. He has a lot more details :)

    HTH,

    Faisal

  • Change of address IP Aironet1131

    All, I have 2 1131 that do not work correctly. The only problem I have is that we changed our scheme of IP and the AGP have static IP. Therefore we cannot identify with them. Once I console in, what are the steps to change the IP address so that we can manage devices using the web interface? Will also be this result in a service interruption?

    Thank you!!

    J. Smith

    Once you console in just go to activate the mode, and then go into \windows\system32\conifg\system mode and change the address of the BVI interface:

    AP > en

    config t AP #.

    interface AP (config) # BVI1

    AP(Config-if) # x.x.x.x 255.255.255.0 ip address

    Don't forget to change the gateway by default also.

  • Change the address IP of CASE

    After that I had added CAS server to the domain of the CAM, can I change the address IP of the CASE more? Do I need to regenerate the SSL certificates? I use temporary atm of SSL certificate.

    Thank you.

    Yes, you need to rebuild the cert temp unless you use a name instead of the CASE intellectual property (not sure of name but for IP Exchange you must)

  • ACS-change IP address

    Dear all,

    I need to change the IP address of existing primary cisco ACS (windows-based) 4.2.

    Can anyone suggest me how to change the IP address?

    I went through the underside of the discussions related to solaris.

    https://supportforums.Cisco.com/message/222551#222551

    Thank you & best regards

    Ahmed...

    Salam Ahmed,

    Disable ACS services before you change ip address, change the ip address, then again the ACS services.

    You should be aware that all AAA clients will be affected due to this change and the new ip address needs to be reconfigured on all AAA clients.

    If you have configured replicatoin you need to change the ip address of the primary server on the secondary ACS as well.

    Kind regards

    Amjad

    Rating of useful answers is more useful to say "thank you".

Maybe you are looking for

  • Apple ID by using the e-mail to icloud

    I was about to change my Apple ID existing (gmail), using icloud email address but the message "your Apple cannot end in @icloud.com different choose email address.

  • I am considering upgrading my laptop for Windows 8. What can I expect if I do this?

    You may want to consider upgrading your laptop for Windows 8, but don't know what to expect or if it is compatible or not. If you are in this category, then you will find this site useful. It will give an idea of what to expect with possible isuses a

  • HP Envy 15 Notebook PC TS wifi problems

    Hello I recently had the laptop HP Envy 15 TS, and I've just developed a problem connecting to my home wifi network. I was able to connect without major problems since the end of last week, with the exception of a few intemittent of cutting off the c

  • Card micro SD from Dell place 8 do not mount on start-up.

    Hello, I recently bought the new meeting place 8 and so far it's been great, except that the SD card is not recognized when I recharge the tablet. The card works fine in all other respects, but have to remove and reinsert the card whenever I need to

  • install a 2nd hard drive in a c hpe - 257

    I'm considering buying an SSD for my computer HPE - 257c.  However, when I opened the box, I find no cables or cards that would allow me to add a 2nd hard drive.  I intend to use the SSD for the OS and programs and use the old (original) hard drive f