change of KING imaq1394 during the capture

Similar Questions

• Changes to spreadsheets lost during the use of numbers on iPad

  I have a mini iPad.  I use iOS v9.1 v2.6.1, numbers.

  Since this version of numbers and the previous, I noticed that some of my edits and entries to my spreadsheets get lost when I reopen it the worksheet. Happens all the time, but enough times to get my opinion.  I don't have to observe what sequence of actions cause changes and entries to get lost down.  Don't know if anyone has this problem?

  Can you provide details?  Do you have documents in iCloud?  Are you open on other devices too?

  SG

• Change of file server (during the copy/move)

  Hello everyone!

  I have a problem with the change of ownership of file on network shares.

  Namely, we have several (important) CIFS shares on our NetApp storage systems where the native (user) management quota is based on the file ownership. We intend to use this quota management for automation purposes, but the problem is that our analysis has shown that the owner of most of the files on these actions is - administrator. It is an unfortunate outcome of scripts hurt of the past and we need to remedy this situation.

  After much thought and keeping the overall complexity of the structure of folders in mind, it became apparent that the ideal solution would be to have users copy/move the files they need their old stocks of those newly created - and at the same time - network have the property for each file copied/moved, change somehow 'in flight' so to speak.

  Is this possible? Moving files to a volumeNTFS, on another volume, where ownhership is set to be inherited is possible - but this is CIFS shares , and it does not work.

  I googled the subject, but so far without success.

  I admit that I'm perplexed.  Any ideas are more than welcome!

  Thank you

  -Semi

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Change vnic-portgroup assignment during the Clone operation

  Hello

  I have a powershell script that creates virtual machines from a template, and I want to change the portgroup vnic

  assignment in my Clone specifications.

  $vmcSpec = new-Object VMware.Vim.VirtualMachineCloneSpec

  $vmspec. Config = New-Object VMware.Vim.VirtualMachineConfigSpec

  How you can access the configuration of the NIC through $vmspec. Config? With the deviceChange property.

  Thanks for your help

  Olivier

  Yes, you can use the VirtualDeviceConfigSpec via the deviceChange property.

  A tip useful is first find the device in question and then simply change the required properties.

  In this case, the network (portgroup) should be changed

  $templateName = 
  $newVM = 
  $esxName = 
  $poolName = 
  $nicName =                                 # Ex "Virtual Ethernet Adapter"
  $newPGName = 
  $folderName = 
  $datastoreName = 
  
  $fromVM = Get-View -Id (Get-Template $templateName).Id
  $folder = Get-Folder $folderName | Get-View
  $esx = Get-VMHost $esxName | Get-View
  foreach($pg in $esx.Network){
       if((Get-View $pg).Name  -eq $newPGName){
            break
       }
  }
  
  $found = $false
  foreach($dev in $fromVM.Config.Hardware.Device){
       if($dev.DeviceInfo.Label -eq $nicName){
            $found = $true
            break
       }
  }
  
  $spec = New-Object VMware.Vim.VirtualMachineCloneSpec
  $spec.Config = New-Object VMware.Vim.VirtualMachineConfigSpec
  $devSpec = New-Object VMware.Vim.VirtualDeviceConfigSpec
  $devSpec.device = $dev
  $devSpec.Device.Backing.DeviceName = $newPGName
  $devSpec.Device.Backing.Network = $pg
  $devSpec.Operation = "edit"
  $spec.Config.deviceChange += $devSpec
  
  $spec.location = New-Object VMware.Vim.VirtualMachineRelocateSpec
  $spec.location.datastore = (Get-Datastore $datastoreName | Get-View).MoRef
  $spec.location.host = (Get-VMHost $esxName | Get-View).MoRef
  $spec.Location.Pool = (Get-ResourcePool $poolName | Get-View).MoRef
  $spec.powerOn = $false
  $spec.template = $false
  
  $fromVM.CloneVM_Task($folder.MoRef, $newVM, $spec)
  

• Error in the capture of several channels using pre-trigger

  I have problems of acquiring data with pre-trigger samples during the capture of several channels, using hardware NOR-PXI-6071E and Analog Input VIs in Labview (inheritance OR-DAQ).

  My goal is to trigger a signal, while capturing another. Unfortunately, I can't use the PFI0 for external triggering, as our cables/material have already been built, so I have to use an analog input as the trigger channel. I understand that to do this I must capture the two strings and the string I want to trigger outside must be the first string in the list.

  If I trigger and capture on the same channel (I tried 1-4) then it works very well, regardless of the number of samples before relaxation together. If I capture more than one channel (the channel of the relaxation to a first), with no pre-trigger samples, then trigger and capture both work very well. However, if I do the same thing with pre-trigger > 0 sample I get the following error:

  Error-10621 to AI control. Possible reasons:
  NOR-DAQ LV: The specified trigger signal cannot be assigned to the resource for the trigger.

  I don't have to such limitation explained in the user manual, and the forum search, I found a few other people who have had the same problem but they had no solutions. Any ideas?

  Hi Jackson,

  Unfortunately, this is a hardware limitation when you reference analog trigger via one of the lines to HAVE.

  Please see this knowledge base. Particularly the second paragraph says

  The error-10621 appears immediately when the VI running if you try to assign scans of relaxation before while scanning multiple channels and using one of the entries as your trigger channel.

  Details are explained in the third paragraph:

  Because all the entries are multiplexed before being sent for analog triggering circuit, it is possible that the trigger on the trigger channel conditions might miss while the device is multiplexing by another channel. In this case, the trigger will not be detected.

  It is explained in the E-Series user manual page 10-3.  Specifically the second paragraph of the section entitled "Analog Input Channel".

  Eric S.

• hinge left cover HP J6480 broken during the cartridge change. How I replace that?

  HP OFFICEJET J6480 ALL-IN-ONE. The left HINGE of the cover broke during the change of the cartridge.  How can I replace it?

  Thank you

  James

  @tyson1, you can give HP @8004746836 and see what options we have to replace or repair the unit.

• PXIe6556 - how to change the voltage of output during the generation?

  I would like to know if it is possible to change the voltage output (data lines) during the generation?

  1. start the generation - Vout = 1V

  2. change of output voltage without stopping the generation of Vout = 1.2V

  3. change of voltage output of...

  TKS

  Try searching for "Advanced: incarceration strategy property attribute ' and ' voltage levels: data voltage range property" in aid of generator/analyzer of signals for the digital waveform installed with your driver. This should allow you to change the levels of tension on the fly. To use this attribute, you must have the latest driver HSDIO (2.0).

  Is that what you are looking for? It is an advanced attribute, and most of the use cases should not dictate it you have been warned. I hope this helps!

• "Changes Made" during the closing - how to get the user's response?

  When you press the close button after the change of some fields in text on a form, how can I find out what the user has selected? (Save, delete, cancel)

  Hey,.

  I found this link:

  http://www.BlackBerryForums.com/developer-forum/184021-save-discard-cancel-prompt-capture-button-SEL...

  After reading it, I wrote a little lil of the code.

  public boolean onSave()
      {
          Dialog.alert("Saved Data");
          return true;
      }
  

  It works for me and made the work of what I need. In my application, I want to save the data that a user makes when they leave the page. This code is called if 1) a change has been made on the page, and 2) if the user clicks on the "Save" option in the save/discard/Cancel dialog box.

  Hope that helps

  Mike

• Agent failure during the ownership change processing

  Hello

  Could someone help me in this issue:

  Data collection is stopped due to the following error:

  15-02-2013 02:08:43.916 ECHO ERROR [IncomingMessage-12294] com.quest.glue.core.jfogbank.JFogbankAgentImpl - an unexpected error has occurred which may cause undesired behavior. You can contact Quest Software customer support if you see this error again: Agent failure during the ownership change processing
  java.io.IOException: no connection is made to com.quest.glue.core.jfogbank.JFogbankAgentImpl@6176959c
  at com.quest.glue.core.jfogbank.JFogbankServer.waitForConnection(JFogbankServer.java:403)
  at com.quest.glue.core.jfogbank.JFogbankAgentImpl.startDataCollection(JFogbankAgentImpl.java:295)
  at com.quest.glue.core.jfogbank.JFogbankAgentImpl.propertiesChanged(JFogbankAgentImpl.java:475)
  to com.quest.glue.core.services.ASPServiceImpl$ ListenerAdapter.propertiesChanged (ASPServiceImpl.java:606)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
  at java.lang.Thread.run(Thread.java:662)

  15-02-2013 02:08:43.916 ECHO [IncomingMessage-12294] INFO com.quest.glue.core.services.AgentStatusServiceImpl - failure reported Agent
  15-02-2013 02:08:49.673 ECHO VERBOSE [Windows_System_on_ctsintcovsods3.cts.com AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection to stop

  What does this error mean?

  Kind regards

  Shiva

  Hey Shiva,

  you are probably using the OS cartridge inherited on x86_64, RHEL or CentOS 6.3 or earlier.

  You must install both 32-bit libraries to do the data collection:

  • -glibc.i686
  • -nss - softokn.i686

  Why is this?

  By dΘfaut x86_64 installation does not seem to install libraries 32 bits, which prevents OSCart commissioning agents.

  Fortunately, OSCart agents are largely independent, and only the C 32-bit kernel libraries (and their dependencies) must be installed in order to get the agents running. Needed to support packages are available on the RedHat 6 32-bit installation DVD in the directory {{packages}}.

  https://support.quest.com/SolutionDetail.aspx?ID=SOL89778

  Best regards, Falco

• Impossible to update kb2779768 in windows 8 restore changes during the configuration to 94%

  ORIGINAL TITLE: cannot update kb2779768 in windows 8

  Restore changes made during the configuration to 94%

  Help, please

  Hello

  Thank you for your message and give us the opportunity to help you.

  Update problems are usually caused by software of third party incompatible or incompatible drivers.

  Please answer these questions so that I can better help you.
  1. have you installed any third-party anti-virus software?
  2 are you able to install some other updates?
  3. do you get an error message?

  To verify the error,
  (a) press "Windows + R" and type 'control' and press on enter.
  (b) type "Windows Update" in the search box top right and click on "View Update History" based on the results.
  (c) double click on updates failed to display the error.

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the update utility.
  (a) Type "Troubleshooting" on the splash screen, click on 'Settings' and press ENTER.
  (b) click on "Show all" in the left pane and then click on "Windows Update" and run the troubleshooter.

  Method 2:

  Step 1: Temporarily disable the anti virus software.

  If you have an anti software antivirus installed, temporarily disable it and check if the update works.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. Windows 8 has an inbuild anti virus called Windows Defender which protects your system.

  Step 2: Try to install the update to the clean boot.
  Follow the steps here to set up the computer in clean boot mode, and then try to update Windows.

  http://support.Microsoft.com/kb/929135

  Note: Once the diagnosis is made please follow "step 3: reset the computer to.
  Start as usual"on the article to start the computer in normal mode.

  Step 3: Try to manually install the KB2779768 in clean boot.

  If step 1 does not work, download the update manually and install it.
  http://www.Microsoft.com/en-us/download/search.aspx?q=kb2779768

  Note: Once the diagnosis is made please follow "step 3: reset the computer to.
  Start as usual"on the article to start the computer in normal mode.

  For any future reference.
  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  I hope this helps. Feel free to use the forum for any other issue of Windows, you may have.

• MISP track changes made to a digitized table used during the conversion?

  I need to convert several databases in AL32UTF8, which is 2 TB or so of size.  I want to reduce the outage window.  Most of the data is ASCII, but the character set is WE8ISO8859P15, so it is possible to get the non-ascii character in there.  My plan was to analyze the database while it is live, then run MISP during the blackout without a full re-analysis.  But I fear that a non-ascii character could go in there from scanning the failure.  The MISP track changes since the last scan, so just check the lines that have been added or changed since the scan?  In my tests limited until now, so it seems that complete analysis would take longer than the window of failure, a progressive solution would be wonderful.  However, I don't see how to make this happen.

  
  

  Thank you

  Mike has
  

  No, the CDS is not currently able to track incremental changes. However, you could try to categorize paintings like those who can get new non-ASCII characters and those who cannot. The fact that a given table has at least one non-ASCII character is a pretty good approximation of this classification. In this way, you could just rescan the tables which are likely to get new non-ASCII characters. Depending on the size of the problem tables this may shorten the time to restart the analysis considerably.

  Note that all need conversion CLOB columns, even if they contain ASCII only.

  To minimize the window of downtime, we recommend a solution with GoldenGate. GoldenGate is, however, not a free product.

  Thank you

  Sergiusz

• Not able to change the plan of the quality during the inspection of reception using the task of ACEM.

  Hi all

  I am not able to change the plan of the quality during the inspection of reception using the task of ACEM.

  Please suggest what to do on the priority.

  Thank you and best regards,

  Piyush Kudawalee

  Hello

  If you use functions much jump, then you must add a new plan of the quality in the settings of jumps.

  Please go to the root of quality > process lots Skip parameters > application process of Skip lot number attached to the elements > go to settings to jump > add plan new collection...

  This will show you the two quality LIMM and Oracle plans. You can add as many plans as you want and can restrict their in asigning to specific jump lot.

  The quality plan is failing because there can be only plan quality attached to jump a lot.

  NOTE: Please indicate the post as helpful or answered if the update has really helped you. This would also bring the wire to the logical conclusion and will be useful for viewers.

  Thank you

  GHG

• I need to change my code IBAN Bank during the session on payments. How can I do? Thank you

  I need to change my code IBAN Bank during the session on payments. How can I do? Thank you

  I think you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Does anyone know how to change the date of the capture of several images with LR CC?

  Does anyone know how to change the date of the capture of several images in LR CC

  Hi Jguy,

  Please see this thread time changing capture several Images on

  Let us know if this helps

  Kind regards

  Assani

• Change the destination directory during the installation of Acrobat Reader DC

  How can I change the destination path during the installation of Acrobat Reader DC? After the download and execution of the installation file, I can't make any changes and Acrobat Reader will always be installed on drive C (sys), but I would change on drive D (data)! Any suggestions?

  Hi martinm1975,

  Try Adobe - Adobe Acrobat Reader DC DistributionSetup offline.

  After the extraction process, you will get the option to change the destination file.

  

  Kind regards
  Nicos