Change of Modem and WRT54GL quit unexpectedly from Internet

Similar Questions

• Updated CC 2015 and programs quit unexpectedly

  Hello. I've just updated to 2015 for CC and I'm in trouble. After Effects and Illustrator will be stopped unexpectedly in the middle of my project. It happens to someone else? Is there a way to get back to the CC 2014? Thank you!

  Please check https://helpx.adobe.com/creative-cloud/kb/cc-2015-applications-crash-on-launch---mac-os.ht ml

  Concerning

  Stéphane

• Hub topology and talk: can I traffic Internet road to PC at a radius of the site through the tunnel and NAT outside in the world on the 5520 hub?

  I don't know if it can be made to work or not, or if it's a mutually excluded NAT configuration that is not possible, but I have a 5520 ASA to my site central office with a fiber of 20Mbps Internet streams and two remote offices with ASA 5505 devices connected via DSL or cable modem and have finally got from Site to Site "spoke" VPN upward tunnels and run with the ability to route traffic to through a 'hairpin turn' speak-to-Spoke on the Hub Site 5520.

  I have desktop PC at each remote site speaks A & B that need to communicate directly with them to support a small group of work-style of the software point of sale that is actually hosted on a remote site A PC.

  PC on two remote sites must also be able to communicate with a credit card processing by the public Internet service, and I wish have the ASA 5505 units in each block of remote office as all traffic directly NAT'ed from each respective out on the local LAN PC straight Internet above each site cable modem or DSL modem. I want to force these PCs need to NAT their Internet-destination back through the ASA 5520 traffic located at the Home Office, on the VPN tunnels. In other words, I want the cable modem and DSL connections to route traffic strictly VPN encrypted to the Home Office and also behave like routers NAT for the local PC it.

  I can kill the 5505 prevents NAT for PCS in remote offices simply removing the rule dynamic NAT factory default for 'everything', but then I can't understand how to get my 5520 central to perform NAT which required of the remote PCs to talk to their service of Internet credit card processor without breaking the configs "NAT-free" necessary for VPN traffic to spoke-to-spoke to work. If I'm trying to put an entry static or dynamic NAT for a remote desktop on my 5520 ASA central, it breaks the VPN tunnel so that PC specific.

  Is that what I want to accomplish even possible with the ASA?

  Hi Neal,

  Yes, it's quite possible! below is a loss of things you need to do:

  (1) make sure of course on both the 5505 s of the ASA, you send ALL traffic from the local network through the VPN.

  (2) as Andrew mentioned, have the 'same-security-traffic permit intra-interface' command on the ASA 5520.

  (3) you do not have to have a configured proxy server, but it is also a good solution. But to make it work without her, assuming that the ASA 5505 remote subnets 192.168.1.0/24 and 192.168.2.0/24, add the config lines below to the ASA 5520:

  NAT (outside) 1 192.168.1.0 255.255.255.0

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Global 1 interface (outside)

  Please note that 1 id, and the interface can be replaced according to the configuration you already have in place in the ASA 5520.

  I don't know what kind of NAT exemptions are at the origin of the questions for you, but if you can put a sanitized one of your ASA 5505 and ASA 5520 config, I can make suggestions concerning the exact configuration.

  Let me know if it helps!

  Thank you and best regards,

  Assia

• Two devices Fax listed when you try to print from Internet Explorer metro

  Hello.  Our Pro Officeject 8600 is ranked twice as "Fax - HP Officejet Pro 8600" when access to the 'Peripheral' charm in Windows 8 Pro 64 bit and try to print from Internet Explorer of Metro.

  One of the two brings in fact appear Fax options, while the other will be printed as usual, but you must use some trial and error when you try to print.

  It is specific to IE connecting the metro interface as the desktop IE printer appears as normal.

  I want my printer to appear as a printer and not a fax, so that I don't have to guess...

  Any help would be appreciated.

  Thank you.

  This isn't a problem from the point of view that the software works in fashion, it is supposed to. When you install your printer it installs two drivers, one for fax and one for the printer, because they are two totally different functions. If you find it difficult to distinguish between them, I would recommend renaming as I mentioned above.

  Uninstall and reinstall the printer will not change this fact.

  I would like to know if this is the information that you need to hear!

  Have a wonderful day!

• Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Copy the contents of the drive in a desktop folder and install from this directory.

• I have an iMac and I can't open my PhotoshopElements 12 editing software.  It is said that Photoshop elements 12 editor quit unexpectedly.

  12 elements Photoshop editor quit unexpectedly. Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple.

  Then, it's the message in a box for the report.

  I updated my system; I uninstalled; I reinstalled and still the same thing.  I paid $79 for it and I can't use it.  Help, please

  Process: Adobe Photoshop elements 12 Publisher [1201]

  Path: / Applications/Adobe Photoshop elements Editor.app/Contents/MacOS/Adobe Photoshop elements 12 12 Editor

  ID: com.adobe.pse12editor

  Version: 12.0 (12)

  App item ID: 768610744

  The external application ID: 192852631

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe Photoshop elements 12 editorial [1201]

  User ID: 502

  Date/time: 2015-11-10 09:35:01.473-0600

  OS version: Mac OS X 10.11.1 (B 15, 42)

  Report Version: 11

  Anonymous UUID: B8973E82-5A70-32F8-7109-DF0E813BEA0A

  Sleep/wake UUID: 443293E8-60F1-432D-96C9-9484EBB54370

  Time since started awake: 5500 seconds

  Wake time: 960 seconds

  Integrity of system protection: enabled

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x0000000000841f0f

  Note the exception: EXC_CORPSE_NOTIFY

  VM regions near 0x841f0f:

  I finally found the solution:

  Solution: Clean up damaged files and reinstall your app

  Resolve the error and to editor elements of Photoshop or Adobe Premiere elements Editor to start are a two-step process:

  1. Records of cleaning:
     1. On the tab or a window of Finder, click go > go to folder.
     2. Type ~/library/conteneurs and click OK.
     3. Search for all records that contain the word adobe in their names and delete them.
     4. On the tab or a window of Finder, click go > go to folder.
     5. Containers of type ~/library/group and click OK.
     6. Looking for a folder named JQ525L2MZD.pepe.
     7. {Be careful when performing this step} In the folder: JQ525L2MZD.pepe:
        • Do NOT delete records: JQ525L2MZD.pepe/Application Support/Adobe/Elements Organizer/catalogs.
        • Delete: another record above, delete all other files and folders inside JQ525L2MZD.pepe.
  2. Reinstall the software:
     1. Uninstall your software from the elements and make sure that the application is no longer available.
     2. Clear your computer's trash.
     3. Restart your Mac.
     4. Reinstall your app from the Mac App Store.
     5. Start your application.

• Suite CS5 do not update about OSX El Capitan and "quit unexpectedly" WARNING shows on the closure of the programmes.

  I just bought a new iMac OSX El Capitan 10.11.1 running and that you have installed the Master Collection CS5. I'm having two problems with him.

  First the entire suite seems to refuse to update. Updates of are recognized by the updater and downloaded. But at the end of the process, a notice of default to install update appears. It seems to include all updates downloaded.

  I'm not under any third-party anti-virus software. I also tried to disable the firewall without result.
  

  

  Also when I left most of the programs of the suite that a notice appears saying the program quits unexpectedly. It was not unexpected on my part because I just he was asked to stop smoking. It's very annoying.

  
  

  These problems are happening to others? Adobe is aware of these problems? Is there a solution, or Adobe needs to fix the problem? And if I can't update, how can the problem set?

  I hope that Adobe intends to give ongoing support to its old products. Especially since it's new business model means that I can no longer buy versions updates to this expensive product.

  Follow the procedure below:

  Open System Preferences :

  

  Then open Security and confidentiality :

  Set the parameters of Mac Gate Keeper allow anywhere [Note: later, you can change the settings back ]

  

  Then try to install the updates, it shud work.

  Let me know if you need more assistance.

• Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  suturenet wrote:

  It's a stupid system, it won't let me post more of the report.

  Yes, the forum software is stupid, but you are insulting the wrong people.

  BOILERPLATE TEXT from the FAQ:

  https://forums.Adobe.com/thread/375816?TSTART=0

  Do not be abusive or aggressive in your tone

  A post of sounding aggressive, demanding, accusatory or abusive will often evoke a response aggressive or abusive and unnecessary.

  Remember, you do not discuss Adobe here in the user forums.  You ask the help of users of volunteers like you who give their time for free. Nobody has any obligation to answer your questions.

• Safari crashes (web content safari quit unexpectedly) and kernel panics

  Hello

  MacBook pro 15 "2014 in intermittent safari breaks down (content of web safari quit unexpectedly) and the kernel panics. No particular clock or its use, it happens randomly after a few min\hours\days... cannot reproduce while troubleshooting... tried to do to reinstall OS no help...

  Run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select 'open '.

  '' Choose a problem '' in the box on the shortcut menu, and then "Start EtreCheck" in the dialog box.

  Click on the button "Report share" in the toolbar, select "copy to Clipboard".

  Paste here when you reply.

• Weekly report of family security in Arabic and secuiry e-mail from Microsoft answer is Arabic... How to change ENG?

  Weekly report of family security in Arabic and secuiry e-mail from Microsoft answer is Arabic... How to change ENG?

  Jim,

  We have updated your language setting. The emails you receive from the safety of the family should now be in English.

  Thank you

  Daniel

• I have a wireless printer and changed modems and need to know where to go and change the security key to make it work wireless

  I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.

  I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.

  The method depends on the printer. Read the instructions or uninstall, and then reinstall the printer. It will ask you the modem settings.

• Images high resolution that I matter IIN indesign appear in a definition very mlauvaise to the screen and once exported to pdf, they are still quite far from the original. Perhaps to remedy these problems.

  Images high resolution that I import in indesign appear in a very bad definition on-screen and when exported to pdf, they are still quite far from the original. Perhaps to address these problems?

  The bad export quality could be linked to the pre-selection of PFD you have chosen. Some of the presets are designed to re - sample images to make a smaller final PDF

• I just moved from windows to mac and changed my photoshop and lightroom, but now continues photoshop and lightroom stopping self on the mac, mostly photoshop and lightroom, anyone know why?

  I just moved from windows to mac and changed my photoshop and lightroom, but now continues photoshop and lightroom stopping self on the mac, mostly photoshop and lightroom, anyone know why?

  Yes, never make it.  I think Mac Yosemite by default active Standby Mode.

  Nancy O.

• sharingd quit unexpectedly

  Hi all

  "sharingd quit unexpectedly.

  A couple of days, I started getting this message when I connect El capital. It happens overtime I connect.

  Anyone know the cause?

  Thanks in advance

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• BEFSR41 wired router affected by change of modem cable

  Hi all

  You don't know if someone here can help me with a problem with the router above following a change of modem, I can get things to work, but once everything is turned off, the next time it starts things are back to how they were.

  To give a bit of history...

  My setup is a G4 Mac and a Xbox 360 Elite connected to a wired router BEFSR41, which in turn is connected to my cable modem, I am based in the United Kingdom so my ISP is Virgin Media.

  This configuration has been absolutely rock solid for more than 3 years, but last Sunday, I was unable to connect to internet and I noticed that the light on the modem was flashing instead of be constant, as it is supposed to be.

  I called Virgin and they did a test signal and confirm there is a problem and sent an engineer. He arrived Tuesday and confirmed the modem was very old and had packed and replaced by a new. We rebooted everything and everything was fine, I could email and get out on the internet as before.

  It worked fine the next day too but on Thursday morning, despite the fire loan being constant on the modem, I couldn't online again. I called Virgin and they did another test signal and said that something did not look right and they would send another engineer.

  He came Friday (different GUY), but confirmed that there is nothing wrong with the modem, the signal is OK just to verify, plugged the Mac directly into the modem, bypassing the router and I could get on the internet without problem.

  It seems that the router is at fault, but I have to say that it is a massive coincidence that it has stopped working correctly two days after the modem has been change, so I was looking at the configuration of the router via my browser page, and the only thing I did was to confirm under Type of Internet connection that "automatically an IP address to get" has been selected and I saved the settings and bingo everything works well again.

  So I put off, Mac, router and modem and switched back them and I'm at square one, no internet access. If I go to the router setup page again, "get automatically an IP address' is still selected and if I hit again 'save settings' everything works fine.

  I then started to bounce back each element separately and by turning the router or the mac on / off does not affect access, I am still able to get on the net, but as soon as I bounce the modem, I'm in the place again until I have click on 'save' on the router set up page.

  It's just my head in - what is the modem to the router to make it 'lose' its parameters and specifically, how to fix?

  I must say I don't remember when I bought the router through any complex installation, it is basically out of the box, go hooked upward and worked for 3 years and more.

  Any suggestions would be very welcome.

  Nick

  As far as I know, it seems that you have a cable modem.

  Your BEFSR41 should work with your modem when the BEFSR41 has been reset by default.  In addition, in some cases, you may need to 'clone' of the MAC address of the computer (the one that works when you connect it to the modem) in your BEFSR41.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Let the empty user name (Note: some routers have a username "admin") and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen).

  (11) If you need to clone the MAC address of your computer, do this step now.

  (12) If you get this far without problems, quit your browser and put your entire network.  Then, using an ethernet cable, connect the ethernet port of your modem to the Internet port on the BEFSR41.  Leave your computer connected to a LAN of the BEFSR41 ports.  If your modem has a USB port, do not connect anything to it.  If your modem works with a battery, remove it now, and then wait one minute, then replace the battery.  Turn on your modem and let it start up completely (1-5 minutes).  Turn on your BEFSR41 and let it start up completely (1-2 minutes).  Turn on your computer.  Try to connect to the Internet.  If you have a problem, temporarily disable your firewall software computer and try again to connect.  If you still have problems, see 'The replacement boot order' below.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional help, please give the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

  Changing the boot order *.

  The boot order (modem, router, then computer) that I mentioned above is the classic boot order, and it works with most of the networks.  Some networks will work well if you turn on all devices at the same time.  However, the other networks is very picky about the way in which they are started, and they may also require a different boot order.  Sometimes, it can require a lot of experimenting until you find the boot order that works.  For example, I had once a system requiring that I start the router first, wait 5 minutes, and then start the modem and the computer.  Try different orders on your system until you find what works.