Change of the antenna of WRT54G V8.

I need to know how to remove my antenna on my linksys wrt54g v8.

I'm afraid I'm going to break the thing, I really need help here linksys.

I'm trying to replace it with an improved antenna I bought.

You cannot delete the antennas on the v8, but you can on earlier versions.

Tags: Linksys Routers

Similar Questions

  • Change the frequency of the antenna

    Hello

    I hope I can get a quick answer on this forum with an understandable explanation...

    I have a wireless router that runs on 802.11, and I'm trying to change the frequency at which it runs on. I'm sure this is possible, but I didn't really know how this can be done.

    Change the frequency would be easier than to change the antenna, or should a work be done on the circuit board. I realize it may void my warranty, but it is a computer science for my school project.

    Can I leave the router alone completely and just mess with the firmware in a sort of way?

    You mean regional wireless network?

    Forget it. He needs the hardware changes. The radio of the BEF is a 2.4 GHz radio. Definitely, there is no way to set this radio to a different frequency outside this band.

    You will need to replace the piece of the radio, antennas, install a custom firmware with a driver for the new piece and customize the firmware to manage the necessary settings for the new radio.

    You will need to check in another forum for help with this. This forum does not cover this type of topics.

    But I want to get my hopes up. I think that the BEF does not use standard linux in its firmware. So you won't get any firmware except the official for the BEF. So you will get the source code for the firmware needed to recompile the firmware in order to add your new driver.

    So basically, I would say that what you do is impossible, unless you are able to build your own firmware from scratch.

  • Problems with the power of the Xbox 360 WRT54G signal

    Here's what I have high down.

    ActionTek GT701 (Qwest 7.0Mbps)

    Linksys WRT54G

    Reference Dell 530 (wired)

    XBOX 360 Arcade (wired)

    XBOX 360 Elite (wired)

    Printer Dell Wireless (wireless)

    Dell Dimension 2350 (wireless)

    I started with an xbox connected to the linksys router and had the excellent signal (HD quality) for Netflix strength. I added the second xbox and was still five bars of signal strength. About three days ago for netflix on the xboxs signal strength is only cut up to two bars. The rest of the House working at full power, but I can't get Netflix on the xboxs back to what is a. I tried to reset the two routers, by disconnecting and then changing the port to the xboxs, upgrading the firmware for the router and finally tried just an xbox connected both. (not in that order)

    I contacted Netflix and thay make any change on the end there, no changes have been made by my ISP.

    Xbox live is running at full speed, I'm not able to get the strength of Netflix.

    Any help is greatly appreciated. We use no cable, and that's how my family watches TV

    Just a note speedtest .net - downstream - 6: 19 (average of 3 tests)

    Upstrem-. 69 (average of 3 tests)

    If the X - Box is connected by Ethernet, then, change the wireless channel wouldn't make any difference. I suggest to update the firmware on the router, reset the router and reconfigure go to zero and then check the signal strength.

  • How can I stop my songs to change to the next song before finishing (on AppleTV)?

    How can I stop my songs to change to the next song before they ended?

    I don't think that apple TV has a setting of crossfade. The music is being heard from iTunes? In iTunes, this is defined in the preferences > reading.

    TT2

  • I can't make changes to the settings of Firefox - none of this works

    As usual, when I allow an update firefox Win Desktop, more things gets sacked. God I wish there was an alternative to that shit from ff!

    I can't make changes to the settings of Firefox - none of this works

    It was theme Aeon 7.5 - this is obviously totally redesigned the appearance of the settings options and caused my mouse does not work.

    Thanks for your help - and I'm sorry for the insults.

  • How can I make a permanent change in the zoom level?

    I want to know how I can make a permanent change is the zoom level? I don't want to constantly have to change the default value of 100% whenever I go to another page. Thank you.

    Hello

    You can also use the NoSquint add-on to change the zoom level by default for all websites at the same time. After setting your zoom level, you can adjust the zoom on different sites and set the options for NoSquint remembers the settings for each site.

    After installation of NoSquint, go to the Add-ons page to define the settings for each site:

    • Tools (or

      ) > Addons > Extensions

    • Click on the button 'Options' of NoSquint

  • I can not change / set the smtp password.

    T - bird 24.5.0 running. On Ubuntu 10.04. There seems to be no way to change/set the password. Here is an overview of the screen indicating a change of account: http://k4gvo.com/images/smtp.png I don't see a way to set/change the password and an exhaustive search of the other menus, including the configuration editor has not helped. For some reason, probably because of an automatic update, he ceased to send emails. I manually installed 24 to see if that helped, but it didn't. This profile/account is probably 5 or more years so there is probably something in the profile that is the pipe upwards. I tried to add a new e-mail account so I could put the server by default to it but it won't let me. He went through all the motions, but when I look in the list of accounts, it isn't here.

    I created a new user account on the system and it I would like to create a usable smtp profile without change it however.

    I'd start on if I can save emails, however when I tried to copy the Mail / directories < account > to another user to test, they never came.

    Thank you
    Jim.

    Setting are OK because I used the same settings on a different system and it works fine. Also, using the same user/pw I receive mail fine, just can't send.

    I can connect from the command line: tbird should therefore be able to from the same system, right?
    Telnet Wxxx - xxxxl.com 587
    184.221.22.22 by train...
    Connected to wxx.xxxxl.com.
    [Escape character is ' ^]'.
    220 - sunxxx,xxxoc.com ESMTP Exim 4.82 #2 Saturday, June 7, 2014 15:34:48-0400
    220. we do not allow unsolicited use of this transport system,
    220 or in bulk by email.

    See also picture as an attachment.

  • the identification has changed to the CHRC... what it means?

    The icon for Mozilla Firefox has been reading of Mozilla Firefox, but now it shows the CHRC... what it means, what it is and why it was changed?

    The text under your Firefox on the Windows desktop icon has changed to the CHRC...? I think that you can rename it to whatever you want, but I see no reason for this change on its own.

    Could you do a right click and take a look at properties? You expect to see a 'target' like "C:\Program Files\Mozilla Firefox\firefox.exe" Summary anything here?

  • Why not change not the icon doesn't change when I go to yahoo of sites Web-example of the circle of purpe with y on the inside?

    When I shoot to the top of mozilla, I have a grey circle in front of the att home page. When I go to yahoo, this icon does not change in the purple circle. The gray circle left any Web site in the address bar. -maybe only unsecured sites because I see that I have a picture of a padlock when I was directed to this Web site. This happened recently and it happens every time I have shoot to the top of the Explorer.

    The Site identity button has changed to protect users against hackers attempt to "spoof" legitimate research site buttons. The site icon still appears on the bookmarks and tabs, but not at the left end of the location/URL bar.

    To restore the icons of the site to the location/URL bar, try the add-on again next:

    There is an add-on to add extra color to the new button

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

    I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

    Yes, I have the same problem. Silverlight 4 does not work in Firefox 14.0.1. Used to use only "restarting in 32-bit mode", but now, who is caught in a loop without end. Silverlight 5 will work, but the video is choppy so badly that it is very bad. I think it's a fall frames in all directions.
    Someone needs to fix this problem yesterday.

  • Change to the subject: the configuration via the mac terminal settings

    Hello

    I administer more than 140 computers mac, with firefox installed. Unfortunately, it seems like a daily appearance when a user calls and says that firefox is updated, listen to which they can't because they are not administrator accounts.
    Now, I use apple remote desktop to turn off auto-updated for many other applications such as software update, microsoft office and adobe. Unfortunately since firefox does not use a standard plist file on mac I can't use default to write preference remotely.
    Question: Is there a way to write to the config of firefox via command line, so I can turn off auto-updated mass instead of having to touch to each computer and do change in the GUI?

    Thank you!

    Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.

    Place a local file - settings.js in the folder by default/pref where you will also find the channel - prefs.js to specify using mozilla.cfg file.

    pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift

    See:

    You can use these functions in mozilla.cfg:

    defaultPref();  // set new default value
pref();         // set pref, but allow changes in current session
lockPref();     // lock pref, disallow changes

    lockPref("app.update.enabled", false);

  • To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

    After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

    You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

  • where in the comments: config I can change where the location of the cursor to default text in a new window/tab?

    Solved it myself just a new option in NewTabURL add-on which should be deselected.

    This problem may be caused by an extension that is not working properly.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

    In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

    https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

    If you mean the - and + Zoom control so it is always there in Firefox 6.0

    or
    View-> Zoom

    Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.

  • Satellite C645: There's changes in the strategy of cooling in BIOS v1.90?

    Hello

    is - that someone flashed BIOS from v1.60 to v1.90 recently posted.
    If so, have you noticed changes in the behavior of the cycles CPU fan?
    I mean, not the annoying problem of the processor fan runs from 0% to 100%, as RPM every 30 seconds (aprox.) have changed or remains the same?

    My laptop model is C645-sp4131L (14 "- P6200 2.13 GHz, Intel onboard video, 2 GB of RAM").

    Thanks in advance for your answers and excuse my poor English.

    I m not 100% sure, but I suppose you phone US model, right?

    Start the same thread on the Toshiba U.S. forum - http://forums.toshiba.com/t5/Laptops/ct-p/c_laptops/tshb
    Perhaps someone there are the same model and tested it with the new update of the BIOS.

    BTW: to reduce the cooling fan speed change please cooling method parameters. You can find it in the advanced power options > Toshiba power Saver saver > cooling method.

Maybe you are looking for