change of the indicator with time using the structure of the event

Similar Questions

• reset the timer using a structure of the event

  I wrote a simple code to count the second and the timer can be reset if I press the button "reset".

  It works; However, there are two problems,

  1. when I run the program, the timer takes 1 second to start

  2 when I press the reset button, the timer also takes a second to answer

  I think it's the 1000ms that is connected to the left corner of the structure of the event. Is there a better way to overcome this problem? (the timer starts and resets immediately

  When I launch the program and press the "reset" button)

  Thank you!!

  Dear ivy037

  You can make the time outside the structure of the event as in the attached code.  I would like to know if this is satisfactory.

  Thank you

• DataGrid and & quot; change & quot; the event, called 2nd time problem

  Hello
  
  I have a datagrid and I use the attribute 'change' to call a function when you click on an item in my datagrid. I use the change attribute because I still want the columns to sort by the column header. In any case, it works the first time around, but if I click on the same element in the list, it does not yet have my function.
  
  When you click an item in the DataGrid I call the 'navigateToURL()' method and it works the first time, but when you click on the same item in the datagrid control, which is not, I guess he thinks there is no change happening so it does not have the function to call. He's right there.
  
  Any help appreciated.
  
  -WestSide

  try to use itemClick

  E.g.
  Script:
  public void clickItem(e:ListEvent):void {}
  If {(myDataGrid.selectedItem)
  navigateToURL()
  ......
  }
  }
  
  ......

• Flash: Audio change of the event to the workflow?

  I've seen several GUID saying how you set audio to the stream, so you can listen while you scrub through the timeline, but nobody seems to show or explain how to do this. Even the help page says simply that he is two settings. Is it still a day before thing? If yes how I place it?

  There are no two parameters, there are four. Click on the layer with the audio, then in the pane properties (Ctrl-F3), select the stream in the Sync drop-down list.

• How to use the structure of the event to sort the listbox data?

  I have a VI that contains two list boxes.  The two list boxes are selectable by the user.  This is how I want to interact.

  When the VI is initialized, the first list box will be filled with data.  If the user double clicks on a cell in the first list box, the second list box will be filled by a sorting of the information contained in the first list box a certain way.  I do not think that the details of how these data are sorted is pertainent here...  Then I want the user to be able to double-click on one of the lines in the second list box.  The double of the item clicked in the second list box will be used in an another VI which will then start.

  I have my VI of work such that the first list box will fill the second list box whenever the user double clicks on a cell in the first list box.  To do this I use a structure of the event.  Here is where the trouble begins.  I have a second structure of the event look for double clicks in the second list box, but when I do this, the program crashes.  In addition, I want only the user to be able to double-click on the second list box, if the first list box has already been double-clicked.

  Generally, my question really revolves around the use of the structures of the event in this application?  Can I use two structures of event at the same time?  Is there a better way to do it?

  No, you probably should not use two structures of different events. One, it should work fine.

  The Subvi immediately execute and return? If not and you have the front locked until the event finishes, which would explain what you see.

• No response to the events of the cluster.

  Hi all

  I am preparing for the CLD and find a problem with the exercise of ATM Simulator as shown in the attached file.

  Please follow the below steps to reproduce this problem.

  1 extract the files.

  2. open atm.lvproj, and then run main.vi.

  3 press card Simulator to enable user input.

  4. put 12345 in user input, and then press ENTER.

  5. left and right menu will display its function and you should be able to press the left and right, but they have no answer to your intervention.

  If you have an idea, please share it with goodness.

  Please note that I use LV2010, but I'm going down my code to 8.5 so that we can share more.

  Sincerely, Kate

  There are serious problems with dataflow doe to wrong choice of program design.

  You shouldn't ever have event inside the strctures case structures, especially structures event, each in a situation different from the structure of the case. Event structures are not dataflow leads, so they queue of events even if there is now way to the service of the event due to issues of data flow. Your events are defined to lock the front until the end of the event, so any event that cannot be handled by the program crashes to the top of the façade for ever.

  So: Get rid of the box structure and use a structure of single event with several instances of the event. That should be all you need. The structure of the event should be directly on the diagram of the while loop. Simplify! Put your business structure housing unique timeout and modulate the duration of the time-out period by an if necessary shift register.

  A good tool is also highlighted. Use the VI while looking at the chart in Slow Motion. You'll see where it gets stuck.

• Photo constantly order of photos in a slideshow changes no matter how many times the movements of the user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this o

  Apple Photo 1.3 serious problems - how can I SOLVE all these problems?

  (1) breaks down without rhyme or reason no matter where I am in the workflow.

  (2) pictures will not be Shut Down Every Time, even after several days of waiting.

  (3) aPhoto frequently badly chooses picture in the EDIT picture option, I get a picture different than the one I clicked on which is on a 100 pictures in a row.

  (4) picture constantly order of photos in a slideshow changes no matter how many times the movements of the end user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this weird behavior! Is there a way to stop this? If I drag the photo again some 7 additional photos in the slide show, after a minute or less, he appears again to where it was it not. !@#$%$#

  (5) If you make any CHANGES to a photo, it often changes the appearance of your complete slideshow of this picture with impatience. So you lose all this not work fix your configuration of the slide show. Even changing the order of photos once more that I had put back where they should be. !@#$$#@

  (6) photo identifies often shades of lamps and long door handles as the faces of the people.

  (7) photo made bad decisions when it comes to brightness, contrast and colors effortlessly around other than to use other software, where as with iPhoto there was a lot of workarounds. I could continue, but will save one who might be reading of this.

  I am up to date on all updates for my Mac. If anyone have REAL answers so please spilling the beans, but according to me, it's the only truth is that Apple has rolled out a product inferrer to replace an exceptional product, called iPhoto, which does not work on my new iMac computer 5K of 27 ".   If I knew what I would have chosen another computer that I use iPhoto to prepare more of fifty to sixty thousand photos in a given year and I use iPhoto to make hundreds of slideshows from it.  Are there plugins for Photo 1.3? I ask because I see where there could be Add-ons, but I can't find.

  Apple has taken a serious decision by turning his back to iPhoto and tens of millions of loyal users.

  Thanks in advance to anyone brave enough to tackle this job.

  James

  First, back up your library of Photos and hold down the command and option keys while launching Photos - repair your database - you have a corrupted database

  LN

• by using a structure of the event to restore a Boolean control with change in value for the menu ring

  I'm trying to get two Boolean buttons to reset when the value of a ring menu.  For this I use a structure of event defined to execute with a ring value change.  However I have another code that should be run while the structure of the event expected to change value.  I place my structure of the event inside the while loop buttons reset as expected but my other code is not run (except when the value of change). If I place it outside the loop the rest of functions code as expected, but the buttons do not reset.  Any help you offer is much appreciated.

  Hello

  ADD TIME OUT EVEN AND GIVE DELAY OF 100 MS.

  Adds the case-application-timeout event

• My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

  My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

  I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

  Thank you guys

  A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

  Good luck!

• Changed password icloud in OSX Capitan, using 'Forgot password?'. Now can't login to iCloud with the new password (email confirmation of delivery to zero Apple receipt)

  I changed my password to iCloud by using the procedure in "Forgotten password?". Received an email from Apple confirming the change. Now OS x Capitan asking for me to enter new password but does not recognize the new password. Same thing happened to me twice. Any idea of procedure to solve that not not found answer with the research on the web.

  Have you tried to exit by using the old password and signing in?

  What to do after changing Apple ID or password - email address

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• Cannot change the brightness on Toshiba Tecra S11 with Win7 using the FN keys

  I can't change the brightness on Toshiba Tecra S11 with Win7 using the FN keys (disable audio and other work fine) when logged in as a normal user.
  Shortcuts keyboard console appears and pressing F6 or F7, the brightness is always set to level 1 (no matter how luminous monitor is really) and cannot be changed.
  I can change it via power or Administrator Options.

  Hello

  Maybe you didn't install VAP (value added package) for all user accounts.
  Please reinstall VAP by using your user account.

  You can also check if the user account is the Admin right supported.
  You can run simple applications (exe) as an administrator.
  For this, he must right click on exe file (value package) and should choose + Run as administrator. +

  Check it!

• Using time events only to trigger changes in the value

  Hello. I have experience with LabVIEW, but not a lot of experience with the structures of the event. Here's my situation:

  Let's say I have an entry, X, which comes from an external source. X is essentially random, from-100 to 100. My output will be Y, which will be generated by labview.  I want to have an initial value of 0. The first time that X is greater than 10, I want to change to 1 and stay 1 thereafter, until the first time that X becomes greater than 20. The first time that X is greater than 20, I want to spend at 2, and stay to 2 for always regardless of X, until the program ends.

  Basically the program will constantly samples X, and when X reaches a certain threshold, it will change and maintain the value of Y until the next threshold is reached.

  Any help is appreciated.

  Hi WillB123,

  See the attached example.

  Steve

• Directory issues active with SBS 2008. Cannot use NTDSUTIL or management tools or make changes to the DNS.

  In July 2010, I've migrated a SBS2003 system to a system of SBS2008. There were a few hiccups along the way, but eventually everything worked very well and the original server was demoted and closes.

  Fast forward to today, June 2013, and now that I see errors in the event log that read:

  «This server is the owner of the following FSMO role, but considers that it not invalid.»

  "This directory server has not recently received replication of a number of directory servers."

  And when you run NTDSUTIL I can't join the domain controller by name or the domain name. I always get the following error message:
  "Error DsBindWithSpnExW 0x6ba (the RPC server is unavailable".

  I have read and tried all the imaginable solutions I could find. However, the difference between my situation and all the other scenarios that I have met is that there is usually another available domain controller. This isn't my case.

  Here is my configuration:

  1 - SBS 2008 Server.

  7 - workstations running Windows 7 Professional

  I can't run Active Directory users and computers, Active Directory and approvals, or make changes in the DNS. However, DNS is working and my domain controller points to itself as a single domain controller and resolves the name to the IP address.

  That I could track down, it's the original domain controller does not correctly downshift and there is always a ton of references to it in Active Directory, but I can't run any tools to remove the reference and seize the roles.

  Is there someone out there who can help you?

  Thanks in advance for your suggestions

  I would recommend posting your query in the TechNet Forums. This forum is dedicated for windows servers... We'll find a solution much more effective here...

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• In the notification area, has changed for Exchange 4 with no internet access and return to network 3 with access network 3 so far.

  When I start the computer and go to the Office to join I / E 10 on the notification area indicating the access to internet, the 3 network icon has been

  change to the 4 network with no access to the internet and to this day it has changed to network 3 with access after a short period.  I had some

  pages not being not able to view also. This happens not all the time well.

  Omer

  Hi, Omer,.

  You are using a wired or wireless network?

  This problem may occur if there is more than one wireless network set up on your computer.

  If you use a wireless network, I recommend you to uninstall and reinstall the wireless network and check if that helps.

  1. Click Start and select Control Panel.

  2. open the network and sharing Center.

  3. click on manage wireless networks.

  4 remove all wireless network listed in this list.

  5 restart the computer and you reconnect to your wireless network.

  Keep us updated on the status of the issue.