Change properties on the fly pop-up

Similar Questions

• Header does not get changed when on the fly optione activated.

  I tired to change the header of the report using a reminder & it was working fine when I generate the report by keeping the option "on the fly report' disabled. When I try to execute the same sequence with "on the fly report option" on I do not see header information that I could see when "on the fly" option is disabled. I did find the cause and found the following link http://digital.ni.com/public.nsf/allkb/05F43468942BE32E86256D980074E200 but it did not work very well. I was not able to understand the reason of not revealing the header information when "on the fly" option is enabled.

  kpraveen,

  I looked at the files attached to this knowledge base and saw that they were modified versions of files delivered with TestStand 3.0.  Because we have made some changes to these files from this version, there is no guarantee that they will work with the latest version of TestStand.

  If you need this behavior in a newer version, you can change yourself the sequence reportgen_ files.  You will need create sequences modifyheader and modifyfooter in the sequence thost files, then call these the result of OTF process sequence sequences.  We are currently working on a set of more detailed guidelines, and I'll post here when they are available.

• Cannot change properties of the comments custom on a model of vapp in realization of Vcloud

  Using Warp commands, I was able to add custom properties comments in my TIME with the productSection API.  When I select my TIME and try to change the property of custom comments, it doesn't seem to save its State.

  It was one of the blogs that helped me to create the personalized comments property.

  Taking advantage of vApp & VM Custom properties in vCloud Director - VMware vSphere Blog - VMware Blogs

  When I click Properties. VAPP and comments properties tab, my custom property appears and has a text box for me to change.  The problem is that no matter what I do, the value in the text box never seems to be persistent.

  Does anyone have experience with this?

  Looks like I answered my own question.

  It seems that I can change the ownership of comments customized during deployment of a model.  That's all that I really need so I'll mark this as answered.

  Thank you!

• Changing properties of the file during import to Premiere Pro

  Hello

  Strange problem I encountered: images taken with my Canon 6 d fixed changes in 1920 x 1080 / 30 fps at 1080 x 720/25 fps when they are imported into Premiere Pro (CS6). My PP settings are: Digital SLR, 1080 p 30.  Can someone help me understand what is happening here I have triple checked the camera and PP. settings This problem is forcing me to produce videos SD that I shot in HD – a real frustration!  Thank you.

  Thanks for your reply, but I just found out that the mistake was made before importing files in Premiere Pro. Initially, I had these files stored in the Mac Photos and did not know that by dragging to the desktop would change the file properties. To keep the original properties, you must go to file > export > export original unmodified.

• Cannot change properties of the log events in the security policy for replace mode archive

  Hello

  We use windows server 2012 R2 Edition OS Server in my organization. We have newspapers of facility security events "archive newspapers when it is full" and he used to use 133 MB of available space. Recently, as the daily logs of the security being created 133 MB size, the local volume was full and I had to delete the old archives manually. Then, we decided to change the settings of the Archive to replace the events if necessary. But when I try to change it and click on apply, it does not seem to apply the changes, his new ghost "archive logs. Please help me out here. Also please ask me questions just in case I missed any important points to mention here. I am a newbie in this forum.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to choose the spelling multilingual document settings and change it on the fly...

  With the help of multilingual documents is a problem - I often need to check spelling in different languages as you type. An indicator in the menu would be a great help...

  Best regards

  As you normally do for applications that use the spellchecker to Apple is going in Edition > spelling and grammar > show spelling and grammar in each app and all of the dictionary that you need for the specific text that you control.

  If you can mark portions of text as being in a specific language depends on the application.  I think that only Apple apps that can do that can be the old Pages 4 and iBooks author.

  Note that some applications (like MS Word) not to use the spellchecker to Apple and have their own internal systems.

  To request a new feature, Apple, go to

  http://www.Apple.com/feedback

• Tecra S5: Bios updated - cannot change page in the BIOS

  I have improved my Tecra S5 BIOS to version 2.0. But when I enter the BIOS, I can only change properties on the first page PGUP PGDN keys, for change of page does not work for me. Everyone knows the same behavior?

  There is a game of the bios supervisor password.
  Turn on the laptop with the INS key. Now you can enter the supervisor password, and you will get the full bios.
  You can change/clear the password and the policy settings using the password of Toshiba.

• Error 123: Timeout to libFrame_OpenPageRef.vi while trying to open the properties of the class

  I get an error message 123: time-out when you try to open the class properties dialog in a project.

  Here is the image:

  

  Anyone have any suggestions on how to fix this? I need to be able to change the class inheritance and other properties. When you open the properties in a new (empty) project, the dialog box opens very well (as slow as usual, that is). The project contained in this class is very large: something like 1200 live and classes 50 +.

  dthor,

  Another possible workaround solution, which I think you discussed previously, is to add the class to a new project file and change the properties of the class through this project. I change the properties in a new project will change the properties of your project to VI of 1200. However, you will not be able to change properties in the new draft, while the old project is still open.

  Sorry for the inconvience, R & D is trying to solve this problem.

• Is it possible to filter design on FPGA reconfigurable on the fly?

  Hello world

  I wonder if it is possible to design multi-channel filters on the FPGA reconfigurable on the fly? For example, it is possible to have X bandpass filters in an iteration, and Bandpass Filters Y with different specifications in the iteration following without having to recompile the FPGA code? Is there a simple way to achieve such a purpose?

  I have built such flexibility in the OTR (where each iteration has different filter settings) but hope to implement on the FPGA so.

  If someone could provide ideas as to whether or not such a conception is possible, it would be greatly appreciated.

  Thank you in advance for your help!

  Steven

  Hi Steven,

  How do you try to generate the FPGA code for this filter, you are using the IP generator?

  If so, this knowledge base article describes fixing the coefficients for multichannel to change on the fly filters.  There is also a nice example in there also.

  Also, if you use this IP generator, this help document describes the more Options box that has the ability to change the coefficients to be 'rechargeable' so that you can change these on the fly it too.

• Printer HP Laserjet installed - choose Properties causes the failure of protection

  Using Vista with a N 3500 HP color laserjet.  Worked fine for almost a year.  Then after an update of Windows - choose change properties in the printer driver causes a protection fault.  Cannot change the type of paper, hand feeding, color, copies etc.  Removed from the printer.  The most recent driver reinstalled on HP site.  The same problem.  Tried to change properties of Run as administrator, the printer properties, but most of the options are grayed out.  Saw a blog about the bad update HP printers, but can't find the article.

  Appreciate any help.

  Hi JRobinson1234,

  Please indicate the full error you receive, to better understand the issue.

  You can try the following steps:

  Step 1: Run the Fixit available in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  Check whether the problem is resolved

   

  Step 2: Make sure that the printer is set as default.

  1. on the Windows taskbar, click the Start button, select Control Panel, and then click Printers. The Printers folder opens.

  2. look for a green check mark next to your printer. This check box indicates which product is the default printer for Windows.

   

  Step 3:  You can follow the steps mentioned in the link below

  Why can't I change the printer properties?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-change-the-printer-properties

  You can check with HP to known problems

  http://welcome.HP.com/country/us/en/contact_us.html

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Properties of the objects in the original application reference

  I continue to ask this question, maybe it's the wrong question,

  but here again:

  Why can't change properties in the main application for a component of the original application?

  Thank you

  Doug

  change of the cn you... but the best way is to loosely couple both the parent and the child of the parent using the communication of custom events/event based.

  so, to use in this case custom events.

  http://cookbooks.Adobe.com/post_Very_simple_example_of_using_custom_events_to_pass-15466.h tml

  Oops... Looks like I already helped you on this...... Laughing out loud! still struggling?

  Post edited by: saisri2k2

• Trying to get rid of the annoying pop up, I chose deny full screen and "remember" in You Tube and cannot get full screen anywhere or change it back. How?

  I tried to get rid of the annoying pop up on You Tube and in frustration, I chose the refusal full screen and "remember" and now cannot get full screen anywhere or change it back. How do I do that? I read the thread here with the same problem and the solution included hit ' command + I "and so on. How do I do that? What is 'Order' and the letter 'i' or 'L' or the number "!"?

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

• In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

  In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

  https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If you mean the - and + Zoom control so it is always there in Firefox 6.0

  or
  View-> Zoom

  Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.

• Changing the properties of the individual elements in the array

  In the attached VI, I have a table 1 d of the slider ('Phase Coefficients') controls where each element of the array represents the coefficient in a polynomial of arbitrary order. The problem I have is that the range of slider, I put to the coefficient of the lowest order (element 0 of the array) becomes quickly impossible for one more order coefficients (> 5 elements). Small changes in the highest order coefficients dramtically change the global polynomial.  I want each element/slider to have its own line, but I know that's not strictly possible that each element of a table shares the same properties. I've implemented a work around (use boolean to activate) in which the range of all cursors is set according to which the item is viewed, but my implementation prevents the modification of the range during execution of the VI. Is it possible to adapt my method (or use another method all together) in order to allow different, editable for each slider element ranges?

  Thank you!

  Each element of an array must have the same properties.  They can only differ in value.

  You can have an array of clusters, and each group can have the slider control.  Here, you will be able to regroup a slider with different properties in the cluster build clusters in a table.

• How to do this: Photoviewer, Windows cannot save changes to the image due to a problem with the properties of the file!

  Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/