change scale wave numbers in letters

Similar Questions

• Why can I not see distinctive numbers or letters?

  Why can I not see distinctive numbers or letters? My father the Dell Demension B110 computer, use Windows XP Professinal. We are unable to type in letters or numbers in all. When we try, the windows seem to jump around the place to place on the same window or a new window.

  I tried on internet and its processing, no letter or numbers or digits to see everything of the kind.

  Hello

  ·         Are you using wired or wireless keyboard?

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         You have this problem with all the application or specific application?

  I suggest you follow the steps mentioned below:

  Method 1:

  Open the keyboard of the screen and check if the problem persists, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard

  Method 2:

  If her above fails step follow these steps and check if the problem persists, follow the steps described in the following link:

  http://support.Microsoft.com/kb/258826

  Note: above article applies to Windows XP as well.

  Also update the chipset drivers and other drivers website device manufacturers.

  Note: changes to the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

• Regular experssion Unicode: allowed only numbers and letters

  What is the best way to write the query that generates the data according to the rules:
  (1) input string may include only numbers or letters, other symbols are not allowed,
  (2) numbers must be positive integers together: 0. 9 paper, no point or a comma or a space allowed in numbers.
  (3) letters may be lower or uppercase, regardless.
  (4) letters/characters may come from an English alphabet and can come from an Estonian alphabet, see BOF MCet alphabet letters he
  http://en.Wikipedia.org/wiki/Estonian_alphabet
  Thus, the symbol of the alphabet "Has two chief points" must also be accepted. Would be preferable that the German alphabet is allowed too and any alphabet is allowed, if possible.
  
  
  
  The initial request, I did is like this:
  

  with t as (
   select '01A' str from dual union all--ok
   select '1,1' str from dual union all--not ok
   select '1.1' str from dual union all--not ok
   select 'F' str from dual union all--ok
   select '1' str from dual union all--ok
   select 'Ä3' from dual union all--ok
   select 'a 3' from dual union all--not ok
   select ',4Ca.' from dual--not ok
   
  )
  select * from t where regexp_like(convert(str,'us7ascii'), '^[a-zA-Z0-9]+$')
  /*
  01A
  F
  1
  Ä3
  */

  I was failed when I tried to use this character class:
  "[: alnum:] any alphanumeric character from 0 to 9 OR A to Z or a to z."
  
  
  My environment:
  (1) "oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - Production.
  (2) NLS settings can change, depending on the client session, sometimes NLS_LANGUAGE have 'ESTONIAN' value and for some sessions, there is another value, same goes for the other nls settings I think.
  
  --
  Without "convert" - function I loose the record with "A 2 Chief points", which is bad:
  
  with t as)
  Select "01" a str of all - double union ok
  Select '1.1' str of all double union - not ok
  Select ' 1.1' any double union str - not ok.
  Select 'F' str of all - double union ok
  Select '1' str of all double union - ok
  Select "3" h.t. of all - double union ok
  Select ' a 3' of all - double union not ok. "
  Select ', ca. 4' double - not ok
  
  )
  Select * from t where regexp_like (str, ' ^ [a-zA-Z0-9] + $')
  /*
  01 A
  F
  1
  */

  Why don't you use it?

   select * from t where regexp_like(str, '^[[:alnum:]]+$')
  

  I was failed when I tried to use this character class:

  I do not see any problem in using alnum. Tell us what you have got everything using the error.

  Kind regards
  Prazy

• Why a strange alphabet does not appear when I type in an address box. Integration is slow and hesitant and numbers and letters are often repeated on their own?

  I use the new Sierra, but the problem predates this.

  Whenever I am typing a command or an address, a strange alphabet appears with blue letters and numbers below. The stalls, insertion and numbers and letters and then repeat on their own. I can't get out.

  This problem comes and goes, no real reason for when it happens.

  It happens when I type in the Web addresses, etc., and when I type the commands of the operating system.

  Can you give more information on mac hardware.

  You can download and run the latest version 3.0.5 of Etrecheck (etrecheck.com)

  and post it here please.

• Boxes with numbers and letters show rather than some images on some websites

  Yammer.com and linkedin.com, images of icons, such as those that display along the top of the screen are not displayed. Instead, I see a rectangle with numbers and letters. I've seen several articles on the rectangles with numbers and letters that apply to the characters but none regarding images. I also tried the steps described in the article on the resolution of the images is not properly displayed, and nothing seems to work.

  Thank you!

  Many sites now display icons using a custom font. Firefox could not be download and using this font personalized for two reasons:

  (1) Firefox to use your fonts favorite instead of the police of the page; or

  (2) Firefox configured to do not to download fonts.

  For more information, see this thread: Yahoo mail display - action buttons like reply, delete, before them and the colors are not displayed. The solution to "clear the cache" does not help.

• Press J, K, L keyboard with showa Numlock numbers not letters

  With Numlock on the Keybord shows numbers not letters on "jkl."

  What's wrong?

  Hello

  Maybe you should disable the light below the F11 key.
  Use the FN + F11 key combination to disable this.

  Then J K L buttons should show letters instead of numbers ;)

• I can't open pictures sent in an e-mail message, the item opens in the word pad and only displays the numbers of letters and symbols. What should I do so that he can open it with a picyure?

  How can I get the images to open when I click on the jpeg symbol? It opens in Word pad and only displays the numbers of letters and symbols.

  Save the attachment to your HARD drive. Right-click on it and open with | Choose the program. Find and choose a program that works, and then check the box: always use this program to open this type of file. This should allow you to open these attachments in the future.   Bruce Hagen MS - MVP [Mail]

• I get a PDF in my email, when itry to open all that shows is a lot of numbers and letters but not the message

  Why an open page only a page full of numbers and letters instead of the enamel of dose

  It would seem that you open the file in a PDF reader. You have one installed? If it isn't...

  Foxit Reader
  http://www.foxitsoftware.com/Secure_PDF_Reader/

  If you have a pdf reader, create a file association.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Your PDF reader.
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  This should allow you to open these attachments directly from email address now.

• Can'I change my serial numbers for Photoshop elements Version 14 (X 6) to the serial number for Photoshop elements Version 10

  Can'I change my serial numbers for Photoshop elements Version 14 (X 6) to the serial number for Photoshop elements Version 10

  Serial numbers are only for a specific version... you can use the number 14 of your version to install version 10

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• Cannot disable TE2 nor can I open the numbers or letters to enter data

  Hi, I need your help. I can't turn off my TE2. Tried for two days. In addition I can open files but cannot open the numbers or letters to enter new data. I tried to run my battery down, but when the low battery it extinguished itself. The minute that I plug to recharge it turns on & will not off again. He also ran very, very slow. I tried several soft resets, a hard reset, lost all my data. Do you have a sync & he'll be back. The hard reset it help stop running real slow. I took all my alarms for Jan 2008 on my calendar. The TE2 is only 1 1/2 years. Can you help me please?

  Thank you

  JEANNE

  Jeanne, check your calendar for appointments or birthdays that have reminders that extend from the end of 08 and January 1.  Delete everything and see if you can turn off your device.

  WyreNut

  Message relates to: Centro (AT & T)

• Change the Page numbers in the index

  Hello

  I have a catalog and I added two pages in the middle of the catalog. Now, due to the addition of two pages, I need to update the page numbers on the index with the new page numbers. I only need to increase each of the page by two numbers, but that starts only at a certain point. Thus, for example, on one of the index I have, 1-70 page numbers may remain the same, since the two extra pages were added AFTER page 70. But every number after 70 must increase by 2.

  I have a find and replace script. I create a table in excel and drop into the document. The script then takes any word or number that is listed in column A and replace it with what is in column B. I used initially this script to find and replace in the catalog product codes, and it worked great, because all the product codes were quite unique.

  Try to use this same script to change the page numbers, but she totally fizzled. The problem is that the same number is repeated later in the table, so the script has the table constantly replace all numbers with the first two. So, here is a small sample of my table:

  Col Col B

  423 425

  422 424

  421 423

  420 422

  But when I run the script, here is what it will turn into:

  Col Col B

  423 becomes 425 425

  422 becomes 424 424

  421 becomes 425 423 becomes 425

  420 becomes 424 422 becomes 424

  Because it alters the table, all corresponding numbers in the document then will increase to 425 or 424.

  Is there a way to ensure that the script does not change the information in the table that she uses as a reference?

  Here is the script below. I didn't write (makes a very nice person on these forums) and don't know anything about the scripts.

  the_table = app.selection [0] .tables [0];
  app.findChangeTextOptions = null;
  with (app.findChangeTextOptions)
  {
  caseSensitive = true;
  wholeWord = true;
  }
  app.findTextPreferences = null;
  app.changeTextPreferences = null;
  for (row = 0; row < the_table.rows.length; line ++)
  {
  If (the_table.rows [row] .cells [0] .silence == ")
  continue;
  app.findTextPreferences.findWhat = the_table.rows [row] .cells [0] .silence;
  app.changeTextPreferences.changeTo = the_table.rows [row] .cells [1] .silence;
  app.activeDocument.changeText ();
  }

  Thank you very much!

  It should work, but make sure you do backup first. I'm not going to say once: first make a backup copy. Yes, I said that you should make a backup first!

  Copy the following script, paste it into an editor appropriate - Adobe ESTK which comes with InDesign is good enough. Save it as "omgwrongnumbers.jsx" in your user Scripts folder. Select as little text as possible, the script will be blindly increment (or decrement) all numbers in the range. And then double-click the script runs.

  //DESCRIPTION:omg the page numbers are all wrong!
  // A Jongware Script 18-Aug-2010
  if (app.documents.length == 0)
  {
       alert ("Oh give me some text to play with :'(");
       exit(0);
  }
  if (app.selection.length != 1)
  {
       alert ("We can't go on like this. Select some text first.");
       exit(0);
  }
  
  myDialog = app.dialogs.add ({name:"omg the numbers are wrong!",canCancel:true});
  
  with (myDialog)
  {
       with (dialogColumns.add())
       {
            with (dialogRows.add())
                 staticTexts.add ({staticLabel:"First to change"});
            with (dialogRows.add())
                 aBox = integerEditboxes.add({editContents:"1"});
            with (dialogRows.add())
                 staticTexts.add ({staticLabel:"Last to change"});
            with (dialogRows.add())
                 bBox = integerEditboxes.add({editContents:"99999"});
            with (dialogRows.add())
                 staticTexts.add ({staticLabel:"Add or subtract this value"});
            with (dialogRows.add())
                 cBox = integerEditboxes.add({editContents:"2"});
       }
  }
  if (!myDialog.show())
  {
       myDialog.destroy();
       exit(0);
  }
  first = aBox.editValue;
  last = bBox.editValue;
  step = cBox.editValue;
  
  if (first < 1 || first > last || step == 0)
  {
       alert ("Now you're pulling my nose arentya");
       exit(0);
  }
  app.findGrepPreferences = null;
  app.findGrepPreferences.findWhat = "\\b\\d+\\b";
  list = app.selection[0].findGrep(true);
  changes = 0;
  for (i=0; i= first && n <= last)
            changes++, list[i].contents = String(n+step);
  }
  alert ("Number of changes: "+changes);
  

• [JS] [CS3] Change "start Peg numbering to: '"

  Hello

  I have a big problem on many InDesign books with approx. 158 files. In fact I cut about 400 pages InDesign files in 158 files with 2 or 4 pages each, but when I cut my reference document, it has been configured with "Start Page numbering at: ' the value '1 '.

  Now I have 158 files with this option ("' start paging to:" the value "1". "), my question is possible thanks to a script to change all the files of the book with the option"Automatic Page numbering"is selected, as it is"continue from previous Document in the book.

  With such a script, I'll save a lot of time on this operation and I'm not motivated to make this file by file.

  Thank you

  Here you are. Work on CS.

  if (app.books.length != 1)
  {
    alert ("Slow Reader Alert!\nI can only work on one book at a time.");
    exit(0);
  }
  for (doc=0; doc
  It is really simple. Line by line:
  You can have zero or more of an open book. For simplicity, this script works on a single open book.
  Huh. Reinforcement group.
  Well. Speaks for itself.
  Everything done, bye.
  .. another reinforcement of group. It is going slower than I thought.
  Ah! A book contains a "BookContent" array of type objects, who holds the file name, creation date and the State (that is, if the document needs to be updated). Its length is the number of documents in the book, one per file.
  .. reinforcement of group...
  (snore) oh, sorry. "Open this document" Yes.
  All the documents have at least a section; the first is hardcoded to start on the first page. Since this is Javascript, it's the #0 section. The "continueNumbering" is just a Boolean, yes or no: "If it is true, continue page numbers in the order in the previous section."
  Close, except when this is necessary. It simply means that if the document not changed (because the numbering was allright), it be not registered, as well as in the user interface.
  Finally, the final closing brace.
  That's all.
  Really.
  (I could go on all day, you know...)
  		   

• Shortcuts exhaust turned from numbers to letters

  My escape key used to lead to shortcuts - almost all were numbers - and after the update, I noticed that they have all the letters now.  I tried to import the key from another computer commands, but those don't seem to change.  Any ideas on how to change this back?

  Appreciate the help.

  You can not...

  The change was apparently connected logical, perhaps for a reason... because of the universal use of ESC in OS X change from full-screen to windowed applications these days... then mode, logical Devs probably changed to keep in the new guidelines for the design of application published by Apple, I think.

  See excellent plus Edgar explanation on the reasons that may explain why, here...

  WHY change digital for letters in 10.2.1?

  .. and like Edgar, I prefer the new workflow, now, I got used to it...

• can not type lower case letters to change the password, only uppercase letters come

  When I change a password and that you have to copy the letters and numbers, I can only type the capital letters, why don't appear lowercase?

  Hi Claudia,.

  I seriously doubt the problem has nothing to do with your keyboard itself (unless all the problems of cap occur in other places as well and on other websites and in internet like Notepad or Word or other programs), but is a matter of how things work and is designed by the designers of web sites on the sites you use.  What you are dealing with is called a Captcha in http://en.wikipedia.org/wiki/CAPTCHA.  While this "capital" may occur on that specific page or site, I sincerely doubt it occurs on all sites that use such a feature - you are not using or never seen a site where it works differently.  Here's a number of things that may help to explain why you're facing what happens:

  1. the process is based on captures the difficult to read characters in a text box to verify that a person is on-line here and improve the safety of bots.  Different programs use different features and things to code differently.

  2. some Captchas are case-sensitive and others not (it depends on the product purchased or how it is programmed on the web site, or both).  Usually if it is case-sensitive I saw him say that this is the case in small print under the image.

  3. in programming, web page designers can usually decide whether to make case-sensitive entry (or just the sight of it appear uppercase, even if correctly entered in uppercase and lowercase letters), but often cannot control if or not the presented images show images that is case-sensitive.  If they want it is case-sensitive, then the text box must accept case-insensitive letters (even if they do not appear like this) or entry will be denied.

  4 if it is case sensitive, but the images are not, then a way around this problem from a design perspective is for box only accept letters in some cases and set the distinction uppercase / lowercase to only allow the entry of this case.  To make it easier on the user and prevent calls it does not work, they can control the input box, it allows only uppercase letters and define the uppercase distinction / lowercase to require that all capital letters.  So even if you can see the image in various cases, the box allow uppercase be entered which will allow the program to accept input.

  5. If it is not case sensitive, so they can always set the box to show only uppercase (for some reason any) which works perfectly for any deal is registered in this situation.

  6. If you are having problems with entry and suspect the acceptance of capital letters only is the cause, then try several images more before hitting the panic button.  Sometimes I find that I have to try 4 or 5 (they often have a switch button to choose an image that you think you can read correctly when the original or other choices are harder - I sometimes have trouble anyway even with my reading glasses and still need to try several times before it works)-then do not immediately assume that it is a rather simple design flaw being able to read the wretched things.  If some that there is a problem, try contacting the technical support web site support team.  They may be able to pass the image of recaptcha or reset your password (if you probably will not then be able to choose).

  7. This may be a function of the browser used.  Before assuming, is the keyboard (which is very likely if it occurs in a text area), try using another browser like some pages work differently with different browsers.  If you usually use IE, then download Firefox, Chrome or Opera and see if the same thing happens.  If so, it is probably not the browser.

  8. at this point, if you can not access due to it (forget the 'problem' if it allows you to enter and go beyond it despite showing all caps - it is not about you and is not a problem) and the website can not help, try using a different keyboard.  If it's a laptop, try a USB keyboard and see if that solves the problem or access the form from accessibility keyboard in Control Panel and see if it works.  If Yes, then you may have a keyboard problem.  First, update the driver of keyboard, firmware and/or software by the manufacturer of the computer or keyboard manufacturer, being sure to use the downloads for your machine and your version of Windows.  If this does not work, you may replace the keyboard, although it also works very well - but I doubt very much that will occur or prove to be the case, unless you have more problems associated with the keyboard that just that.

  Somewhere along the way, you will discover that this is not a problem or find the cause of the problem (it is really not that many options beyond what precedes that can cause this kind of thing and not be found using ideas, tests or methods above).  I'm almost ready to almost guarantee that you don't really have a problem, or one of them will be identity it and depending on what it is, give you an idea where to go next in terms of resolve.

  I hope this helps.  Again, I think you're very probably see how the site and not a real problem unless you can't access, after at least half a dozen tent (and perhaps someone else is who has best eyesight to try as well) and technical support of the site people confirm what is happening shouldn't happen.

  Good luck and best wishes.