Change sharing permissions, now I can't access the local disk

Hello all, I have two computers, both running windows 7 (one is 64-bit and the other is 32-bit) connected via LAN and WiFi. One of them has all of the local disk shared with full compensation for everyone (full control). I decided to remove these permissions and control to "deny". Then I had to cancel the task and decided to resume later. HURT, now I've lost access to this drive, even though I can access some files. When I try to enter in the drive, an error message appears saying "C: is not accessible. Access is denied. I did some research and it seems to be a common problem, but I followed all the steps did not work. It shows as 0 bytes and security options does not show anything, but "you don't have permission to view or change the permissions of the object settings. I tried to adapt, even in safe mode and as administrator, do not to prevail. It keeps saying 'access denied' I also tried to set a hidden administrator account, but the account manager is 'not available for my system' when I made these unfortunate changes, it was not this computer but on the other, I think it might be the reason. Now, I can not access my local disk or change anything. Please, help me, I can't find a solution to this mess!
Thank you

Hello

I suggest you to follow the steps in the link given below and check if it helps.

How to open a file if I get an access denied message?

http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

Let us know the status of the issue.

Tags: Windows

Similar Questions

  • I uninstalled MSE and installed norton, now I can't access the web. any help? Vista Home premium

    I just uninstalled MSE and installed Norton. Now I can't access the internet. I have vista Home premium. my internet works on all the other PCs in the House. the computer shows I have internet acess, but tells me that I can't Conect on the web. I used restore to an earlier date without change. What can I do?

    Well, I just thought about it. I started in safe mode and uninstalled Norton and safety package provided with Norton from Comcast. It was the solution. I don't know if it was Norton, safety package, or both, but I'm back to MSE and perfect performance. I hope this can help someone else. Thank you

  • I had to do a factory reset on my W7 64 bit PC and reload my software. Now I can't access the CR2 files. Help!

    I had to do a factory reset on my W7 64 bit PC and reload my software. Now I can't access the CR2 files. Help!

    These are the files that I have consulted before the reset and come from my Canon 550 d.

    Do I need another plugin?

    I think the key is that the updates failed.

    I suggest try to update manually via the packets 'Camera Raw 6.7 Update' and 'Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5' found here: Adobe - Photoshop: for Windows

    -Christmas

  • Reinstalled XP, but now I can't access the internet

    Hello

    I recently reinstalled Win XP on the same computer on which this copy has been installed.  The computer will have access to our home WiFi network, although he does not always see other computers on the network.  Worse, is that when I run IE6 Service Pak 2 (the version that is installed on the original disc), I can pull up the MSM homepage which will remain for about 15 seconds, then I get an error that IE has to close.  I think it boils down to "I can't access the Internet."  Tried everything that I can think and followed a number of suggestions on this forum.  I've seen comments that I need the update to Windows Service Pak 3 here, but, of course, I can't that without access to the internet.

    Any ideas?  Thank you, Susan

    A few thoughts...
    -from another computer...
    -Make sure you get all the drivers for your computer from the manufacturers Web site
    -Download a form any anti-virus (MSE for example)
    -Download SP3 from here: http://www.microsoft.com/en-us/download/details.aspx?id=24

    Once you have done this, I hope you can get on the Internet. Once there, get all your updates.

    I hope this helps.

  • How can I access the hard disk in a satellite A30?

    I just bought a new hard drive and were surprised by the lack of information on the internet with the help to access the hard disk. Help, please. I have the satellite a30-203. Thank you, Daniel Short

    Hello Daniel,.
    location of the HARD drive is down just under the CD-RW/DVD device.

  • Upgrading to 4 Fusion and now I can't access the web server on my Mac host

    I am running OS x 10.6.8 and I'm hosting a virtual machine running windows XP, using NAT Networking. I have a web server running on the mac I need to access from the hosted virtual machine. I used to be able to just use the IP address of the gateway in the virtual machine for the web server, but it doesn't seem to work. If I set the external IP address of the mac it seems to work, but I don't have a static IP address, so it is a pain to update every hour.

    Any help would be appreciated!

    Thank you

    Although in some cases, the IP address of the gateway works, nevertheless IMO that is a misuse and should use the address IP of VMware NAT Virtual Ethernet adapter IP address the host not IP address of gateway.

    If in a Terminal, run the following command:

    ifconfig | grep -A 3 vmnet8
    

    Then use the address after "inet" IP said at the exit.

    Example on my system:

    Last login: Mon Jan 16 12:43:00 on ttys000
    Computer:~ WKZ$ ifconfig | grep -A 3 vmnet8
    vmnet8: flags=8863 mtu 1500
        ether 00:50:56:c0:00:08
        inet 172.16.198.1 netmask 0xffffff00 broadcast 172.16.198.255
    Computer:~ WKZ$
    

    So I use 172.16.198.1 of the prompt or use the host name of the Mac (without the .local) after the addition of 172.16.198.1 and the hostname of the Mac to the guest hosts file.

    Post edited by: WoodyZ - posted: January 16, 2012 12:52

  • I changed the security permissions and now I can't access the file in IE

    When I apply changes in the advanced settings, then click on apply this box opens: application security error

    an error occurred applying security information to:                                                                                                                    C:\Users\Jeffry\AppData\Roaming\Microsoft...\D3DCompiler_47.dll

    access is denied

    continue cancel

    Then another box is open behind her that says:Windows Security

    Stop the spread of the permissions settings leads to an inconsistent state, in which some objects have the settings but others don't. If you have made the change by mistake, you must apply the correct change immediately in order to reach a consistent state.

                                                                                                                                                                                         OK  The problem is that I do not remember what changes, I did, but I've tried every suggestion here, but none have worked so far. System Restore was not able to help so lets not suggest that.

    I spent 30 million dollars on RegServe and although it helped clean up echoes it did not help this problem. Very complicated and frustrating!

    Hi Jeff, allows to taste the simple options, let us know if you have tried these or not:

    1 restore the permissions of folder for C:\Users\Jeffry: right-click on the file, go to properties, advanced security:

    1.1 property confirm otherwise change it your account,

    1.2 list to ensure that entries includes SYSTEM administrators group and your account, all have full control and none are inherited by the top.

    1.3 the check "Replace all entries authorization child object with permissions entries inheritable from this object" box and click on apply.

    2. try running SFC/scannow:

    http://support.Microsoft.com/kb/929833

    3. use FIX IT automatically search and solve problems: http://support2.microsoft.com/fixit/en-us?wa=wsignin1.0

    4. create a new profile, logon, and testing, it works as expected, delete the old profile (backup your data first)

  • I upgraded 10.0.1 now, I see that the root directory on the site I want to access. Get a '550' cannot change directory message. I can still access the site on the old version on another PC

    The problem is on a remote PC (XP o/s)

    My mistake, the problem is with access to the site. I have looked at the list in cache on the other PC, and the update of Firefox was a coincidence.

    Thank you for your attention

  • Windows install the latest updates on my phone and now I can't access the internet

    Windows Installer automatically of updates on my computer and now even if the system connects to the wireless network and I have only local access he has no internet access.  I tried both with the wired and wireless options and nor will not work.  Everything worked fine until the update system - do not know if I have to do a system restore to when he installed updates (I tried to restore to a point a few days before the download, but it failed) or if I should try to uninstall updates.  While I am not very confident with the work on the computer would like some advice on the best way to go.

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understanding Windows Update and Extras in Windows Vista at the link above.

     

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Problems with system restore:

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the work Safe Mode with network.

     

    To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • My husband put password & didn't write to the down-now I can't access the privacy settings... and security can you help

    It was on my laptop - it entered the password on his own voliton but do not write it down. I want to control my laptop - can I get a permission to change password please.

    Thank you all for the helpful suggestions. Ultimately my husband deleted the program and then reinstalled, and I could not enter any password.

  • re-installed windows XP on Inspiron 1545 now I can't access the wireless key?

    Clean install of vista bu I can get my key without thread to work either w / or w/o the FN key?

    Hello rIp4345

    To find the material listed on your system, go to support.dell.com and click on the link status of warranty left. You will be asked for your service tag. After entering the tag, you will see the system information window. Click on the tab that says 'Original System Configuration'. All material provided with the system will be listed here. Find the model of you network card and use that to determine the right driver that you need to install.
  • I'm rnning XP on my Toshiba laptop. Recently, I tried to write on a DVD without success. Now, I can't access the photo files that I put on a CD.

    CD rom drive reads do not CD after you have attempted to write to a DVD

    Hello Wrogers331,

    Thank you for your message.  This happens with all CD (ie. music, files, pictures)?  If so, click HERE for a possible solution.  Please let us know if this or help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • can not access the lower part of the screen

    With the help of LR 5.5 on Lenovo Thinkpad PC running Windows 7. Resolution 1440 x 900 screen.

    I tried to increase the font size, but started with 200% and now I can't access the bottom of the pages. The pages are too large. If the text and the buttons below are unavailable. Therefore, I can not now reduced the font size to next lower size (or any other size), and the program is unusable. I uninstalled LR thought reinstalling it would go back to the default font size, but it does not work. No doubt the uninstall does not remove everything.

    My original problem was too small, hard to read fonts. Also don't like white on black, and would only reverse.

    How to return to the original too small fonts terrible but better than nothing!

    Thank you.

    You need not reach the button with the mouse. Pressing 'Enter' will act as if you pressed the button. After you change the size of text, you may have to quit LR and open it again.

    HAL

  • Can not access the updates XP, 0x8024400A error message.

    I reformatted my HARD drive, reloaded XP SP2 Home. Download IE 8. I need XP SP 3, but now I can not access the updates... 0x8024400A error message.

    Help please

    Hello

    Install SP3 by downloading and running from...

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

    You can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

    This should move your 0x8024400A problem. So try and get up-to-date with the Windows updates. You will probably have to go through Genuine Windows Validation.

    Tricky

  • My password has expired on Windows 7 and I can't access the machine

    I have a Samsung Windows 7 Home Edition laptop. Last night, the password has expired (apparently without warning) and now I can't access the machine. I tried Safe Mode, but it returns the sign on screen. Tried to fix and had the same end result - a return to the login screen. There is only one account on the machine.

    When your password has expired then, you will be immediately prompted to enter a new password. Unless you enter a new password, Windows won't let you continue.

    No, I had not given the possibility to enter a new password. It's a stupid system to have passwords expire on home computers.

    What you say does not correspond with my own observations.

    Restart in Mode safe mode, and then log in as administrator. The password is usually empty. Now, you can reset the password for your existing account.

    When you're done, plan in advance and create, test and document a second admin account.

    To avoid that your passwords expiring, follow these steps:
    1 log in under an administrator account.
    2. click on start.
    3. type the three letters cmd in the search box.
    4. press on Ctrl + Shift + Enter
    5. click on "run as Administrator".
    6. type the following command and press ENTER:
    NET accounts /maxpwage: unlimited

Maybe you are looking for

  • Whence my VIP mailbox?

    All of a sudden I have a mailbox "VIP".  I never put in place, and I didn't know it could exist. There is another mailbox on the inside, the same name as one of my email addresses.  I cannot remove it and does not know where it comes from.  There are

  • Why have too many tabs suddenly removed?

    Firefox Add ons have worked very well.Following an accident, I am now informed that too many tabs 1.3.6 is not compatible with Firefox 3.6.18.I don't want to spend because, generally, many Add ons fail to work with the upgrades and upgrade tends to b

  • Satellite A300D-17F - where to find drivers for XP

    Hello I can't find drivers for XP. Someone can help me.

  • iCloud on W1 - 810 Installer failed

    Hello I try to install iCloud 4.x on an Acer W1-810. Just get the error message: Error applying transforms. Check that specified transform paths are valid. No idea what this means, but after searching a bit, I see another getting the same error on WI

  • Loss of connection with my router, shows only limited access and my network showed that unidentified

    Original title: unidentified network, missing the default gateway Hello So one day out of the blue I lost connection with my router. I was able to reconnect but this time around I had only limited access and my network showed non-identified. I tried