Change the adapter into the charger Mag Safe

Hi all!

I just bought a new Charger Mag safe for my MacBook, and even though I know that you can pass the plug of the adapter, I never did.
Is there a reason why I can't change the wall outlet and use the heavier extension, Earth and plug permanently?

I use ONLY the long cord, has been like that for years. It is perfectly fine that's why Apple gives us the opportunity.

Tags: Notebooks

Similar Questions

  • Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode.

    Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode. When I start the browser is not open and it displayed a message
    Mozilla Crash Reporter

    User Agent

    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; InfoPath.3)

    Go to the address on: plant and tell us your last accident IDs. Then we can watch data specific to your accident and have a better idea of what is causing the problem.

    Given that everything goes well in safe mode, one of your extensions or themes is at fault. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems to figure out which one of your modules is the cause of the crash.

    Start here: https://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes#The_problem_does_not_occur_in_Safe_Mode

  • Charger Mag Safe 2 what color the light should be?

    MAG 2 sure what color the light should be? I care and it works but the light is red or green?

    Green is in charge...

    Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  • The battery of my computer does not load. I changed the battery and I changed the AC adapter, and I always get this message: "0% available (plugged in, not supported)" I don't know what the problem is.

    My computer the battery does not charge.  I bought a new battery and I changed the AC adapter but the battery still won't charge.  This is the message I get:
    0% available (plugged in, not charging) don't know why.

    Hello

    1. What is the number of brand and model of your computer?

    Let us try the steps mentioned below to see if the problem is resolved.

    Step 1:

    a. Click Start; type devmgmt.msc in the start search box and press ENTER.

    b. expand the batteries category.

    c. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.
    WARNING: Do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.

    d. on the Device Manager, click Action and then click Scan for hardware changes.

    Windows will scan your computer for hardware which has not installed the drivers and will install the necessary drivers to manage the battery power. The notebook should now indicate that the battery is charging.

    Step 2:

    If this does not work, try power cycling of your laptop by following the steps below.

    a. remove the battery from your laptop, and then press the power button to all 15 sec.
    b. now connect to the battery and check if it works.

    I suggest also, please contact your computer manufacturer to see if they have any suggestions about it.

  • vmrun to change the settings of the VM host network adapter connection

    Hello!

    I have a vCenter computer vSphere virtual running Windows 2008 R2 that hosts multiple virtual machines of different operating systems on several different network VLAN (100, 200, 300, etc.). I would like to be able to run a command from a guest VM running Red Hat Enterprise Linux 6.5 say vCenter to change the settings of a network adapter VLAN to another and vice versa. I did a lot of studying, but I could not find a way to do it. The closest thing I found what I'm looking for are the commands below, but they do not work.

    vmrun t CR h 192.168.0.3 - P443 - gu < guestusername > - < guestpassword > gp readVariable "[name of the data store] RHEL 6.5/RHEL 6.5.vmx ' runtimeConfig ethernet0.vnet/dev/vmnet0

    vmrun t CR h 192.168.0.3 - P443 - gu < guestusername > - gp < guestpassword > writeVariable ' [name of the data store] RHEL 6.5/RHEL 6.5.vmx ' runtimeConfig ethernet0.vnet/dev/vmnet1

    ReadVariable command seems to run, but produces 0 bytes of data, and the writeVariable command gives an error message indicating that the operation is not supported. Vmrun can perform a switch between the virtual computer network connections or do I need to use a different approach? The reason that I need to have a command to run instead of just go into the configuration of the VM guest in vCenter and selecting only the network personalized the menu drop-down is so that development and the test team can run a script will instead given administrator privileges.

    vmrun (and VIX) won't let you do what you're trying to do.  Nothing don't pay attention to these variables being changed.  You will need to use an API that reconfigures the virtual machine networks, which probably means writing code using an API of vSphere.

  • Change the properties of the NETWORK adapter

    I am cloning from a model with a single NETWORK adapter, but the model has disconnected the network card.

    How to define 'Connected' NETWORK card configuration and "connect to turn on?

    Thanks in advance

    Hello!

    HM, not so easy, since the workflow grouped uses the configuration of the model of-online if you cannot change the model itself in vCenter, must dig deep into the card device config spec. It's in the GetDevice - just Scripting element [in the middle of the workflow.

    In the attachment, you can find an example with the extended GetDevice element...

    The new script:

    //let the device start connected
var connectInfo = new VcVirtualDeviceConnectInfo();
connectInfo.startConnected = true;
virtualEthernetCard.connectable = connectInfo;

var deviceChange = new Array();
var change = new VcVirtualDeviceConfigSpec();
change.device = virtualEthernetCard;
change.operation = VcVirtualDeviceConfigSpecOperation.edit;

deviceChange.push(change);

    Kind regards

    Joerg

  • Changing the properties of the charger added as child

    I have a movieclip holder on the screen, then I create a loader, to load an external SWF into the charger and addChild on my support:

    var bgloader1:Loader = new Loader();
    bgloader1. Load (new URLRequest ("myExternalFile.swf"));
    bgloader1.x = 0;
    bgloader1.y = 0;
    MyHolder1.addChild (bgloader1);

    It works in all the

    Presents all works.  Now if I want to come back later and change the position or alpha, I get an error:

    None of these work:
    MyHolder1.bgloader1.alpha = 0;
    MyHolder1.bgloader1.content.alpha = 0;

    TypeError: Error #1010: a term is undefined and has no properties.

    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()

    Could someone please help me understand what I am doing wrong?

    If you are trying to target the content until it's loaded, you miss the mark because he's not here.  If you plan to immediately attack the loaded file, then you will need add a listener for the charger for it so that you know when it's loaded and ready, and then use the function handler for this listener to do what you plan...

    var loadedSWF:MovieClip;

    var bgloader1:Loader = new Loader();

    bgloader1.contentLoaderInfo.addEventListener (Event.INIT, changeMC);
    bgloader1. Load (new URLRequest ("realm1.swf"));

    function changeMC(evt:Event):void {}

    myHolder.addChild (bgloader1);

    loadedSWF = MovieClip (bgloader1.content);

    loadedSWF.myTarget.alpha = 0;

    }

  • How can I change the account charged for a membership family Music?

    I recently entered store credit to my account, and I fear that my family membership Music will deduct my iTunes store credit. I'm not the family Organizer, but the management of the subscription appears in my account, and receipts show the composition charged for me. So, I came to believe that Apple is charging my account for the composition. Is there a way to change the account that is in charge of members? If I cancel the automatic renewal and then register as a member of the Music of the account of the organizer of the family, all my music libraries will remain intact?

    Hello..

    Read this article to support >join Apple music on your iPhone, iPad, iPod touch, Mac, or PC - Apple Support

  • I changed the settings of Java and now Firefox plant she opens up, even in safe mode; How can I fix?

    I tried to change the settings to access the comments section of Slate.com. Good or bad, I changed a setting Java-1 to 2. The setting spoke in: config and I think it was some sort of max. As I can't open anything, I'm not sure.

    When I made the change, firefox crashed immediately, whenever I tried to reopen, even in safe mode, it hangs again immediately and will not reopen.

    Hi pternagy,
    Sorry, you have problems.

    For any future reference. Those of us who mess directly with: config soon find out how to get errors and it is wise to backup. Occasionally backup of your entire profile for example can be useful and would probably give you a quick solution of the copy on the file from the backup.

    OK on the topic to try to get Firefox back as it was:
    Find your profile and the prefs.js file and rename that. (The renamed file is a potentially useful backup.) Firefox is then forced to regenerate the file and will reset your default preferences. You can then re open and use Firefox. Then, try to return to normal.

    Try to manually change the file prefs.js is normally a bad idea. However, if this is a one-time change prefs it would be possible to directly edit the prefs.js file (while Firefox is closed) to get everything back to how it was before. You have the file renamed to work with. Probably best to test this in a new additional profile so only break you test additional essential Firefox profiles profiles works do not.

    These articles should help you:

    Please post back with how you go and if you need additional assistance.
    Good luck.

  • Some pages don't load on Firefox. They charge after changing the proxy settings back.

    I have a very annoying problem with Firefox. Some pages not loading, randomly. Other browsers work fine. I tried to disable all add-ons, I reset firefox, I tried safe mode. Nothing works. When a page does not load, I go to advanced/network/configuration and change the setting between 'no proxy', 'use system settings' and 'auto-detect' proxy. I try to reload each time, sometimes try to go to another page and then come back. Finally the page I want loads. Sometimes it loads when I just of the cycle on the same setting, as it was before! It makes no sense to me. I'm on MAC OSX 10.8.5 and have no proxy at the system level settings (all boxes are unchecked).

    Any help would be appreciated! I don't want to change chrome, but I'll be forced to if I can't solve this problem! (annoyingly, the page did not load when I tried that submits the first time...)

    Try disabling IPv6 (also check other possible causes).

  • Changing the setting of 80% to 100% on the Satellite Z30-A-104 battery charging

    Hello

    I used my Z30 Satellite primarily as a desktop till now (the charger is still plugged).
    One day I got a popup option to increase the life of the battery (charge only up to 80%) and I accepted the option.

    But now, I'll be traveling and can't reset this option.

    I want to charge the battery to 100% and be able to take advantage of longer battery life.
    How is that possible? Help!

    See you soon
    Vivek

    Hello

    I think that you have changed this setting in battery Toshiba Manager c++.
    You must disable Mode "Eco-responsible".

    Perhaps this Toshiba info would be useful:
    [TOSHIBA Eco Mode ECO CHARGE MODE charge | http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-Eco-Charge-Mode/ta-p/355376]

  • Have several saved tabs to reopen on FF6.0 start, but once they charge, it displays the last open tab. If I try to click on another tab I opened, change the url in the address bar, but it still shows the last tab open on the screen.

    This happens if I click on one of the tabs I opened.

    That's why Firefox is useless because I can't show a tab at a time and would have to open it again if I want to display again.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

    It is also possible that there is a problem with the sessionstore.js and sessionstore.bak files in the Firefox profile folder.

    Delete the sessionstore.js file [2] and sessionstore.bak in the Firefox profile folder.

    If you see files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js then delete those as well.

    Delete sessionstore.js will cause App Tabs and tab groups and opened and closed the tabs (back) to get lost, so you will need to create them again (take note or bookmarks).

    See also:

  • Drive HARD into C; / EN d: /, if I change the diskvolume?

    Sat1410. The hard disk is divided into en C: 20 GB 20 GB D:. How can I increase the c: / D: volume 35 GB / 5 GB?
    Thanks, Anton

    Hello

    You can use programs like Partition Magic or your recovery in expert mode CD to change the size of the partitions. But in this case the entire hard drive will be formatted and all data will be lost.

    Good bye

  • Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

    Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

    Yes and no.

  • After changing the MagSafe adapter, macbook pro takes too long to start the video

    After changing the map of 85 W MagSafe, time to start the computer has become excessive (2 minutes). The screen lights up immediately, but the video appears after 2 Min.

    Once started, the performance of the computer are OK.

    This anomaly occurs after the change of the adapter, it's never happened before.

    Try a SMC reset:

    https://support.Apple.com/en-us/HT201295

    Ciao.

Maybe you are looking for