change the column of the tree

Similar Questions

• Change an attribute value in a table of the tree at all levels using the control button.

  Hi all

  I use JDeveloper Version 11.1.1.7.0.

  I have set up on my Table from the tree only when selected in the parent level also chooses the checkbox on the levels of the child associated with a checkbox, see my below base schema.

  My method to achieve this was to follow this guide... Andrejus Baranovskis Blog: box support in ADF tree Table different levels

  1. [Checkbox] status. Name | Employee ID

  -> 2 status [Checkbox] | Name | Employee ID | etc. | etc.

  -> 3 status [Checkbox] | Name | Employee ID | etc. | etc. | etc.

  What I want to do now, is once the box is checked at the parent level and all child nodes checkboxes are also selected, is on pressure of a command button, the value of my 'Status' column has changed through all the levels where the check box is checked.

  The default of my column 'State' is 'untrusted', it should be replaced by "Approved" once the Parent level checkbox is checked (which causes the child nodes also be checked) and you press a command button.

  I searched for some pointers on how to do so for some time,

  I was trying to think of a way to use the attribute of checkboxes that is a Boolean data type, there may be a way to create a method that checks if the Boolean attribute = true and where is the value of the Status column should be changed, the problem is to make it through all three levels of the table from the tree. But I can't understand it, any help would be greatly appreciated.

  Thank you

  Kind regards

  Jamie.

  Hi Jamie,

  I guess that you can apply the same idea that you used to update the Boolean attribute box of your iterator. This time you need to do is to iterate exactly same way but update the Status attribute. Have you tried to do this? So while the first course you'll hand over your boolean, check and update status accordingly.

  What keeps you from doing this?

  Concerning

• Change the Jpeg file taken time in the "Date" column to windows explorer for modification time?

  I just found out that JPEGs, edited and recorded by CS4 still wear their original creation time in windows Explorer, regardless of how many times they have been modified, which makes it very inconvenient and confusing, without opening the files to find out. Does anyone know how to change the setting to 'Update?' Thank you very much in advance!

  You say that you see the creation Date column in Windows Explorer, but not update?

  If this is the case, it's an easy fix...  In Windows Explorer, right click on the bar with the titles (for example, on the title the creation Date) and check the update box.  Normally the update, this is what is displayed by default Explorer for the elements of the General.  I don't know what is shown for other types of files, I use only general articles.

  What do you see when you follow these steps:

  1. right click on the folder that contains your images (in the navigation to the left).

  2. Select Properties.

  3. click on the Customize tab.

  4 what was the optimize this folder for: of the field?

  FYI, as you can see you can change folder for example, customizing the general articles for one or a whole folder tree.

  You can also make changes to one of your folders of photos, and then propagate the settings to all folders of this type in your system.  I'm really jump coming here; I would like to know if that's what you eventually want to do.

  -Christmas

• Is it possible to change the playlist view back to display columns on iTunes?

  Is it possible to change the playlist view back to display the columns?

  View > view as > songs.

  TT2

• When I imported e-mail addresses into TB, they landed in the nickname column and I can't manually change the addresses of 1000!

  Is there a way I can change the nickname column to e-mail addresses? If I try to import the address book again (I on a different flash drive), I'm afraid I'll have 2 copies and it's going to go even more complicated.

  Remove any address book and do the import again, but this time align the data with the correct address book fields.

• How to change the rows and columns of newtabs?

  I can't change the rows and columns to mozilla version 33

  From topic: config browser.newtabpage.columns shows 5 by default, but these 5 columns appear not only 3 as before. Don't know why, but I use generally not even the default new tab page in my profile daily.

  Still works this - https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/ - extension to change the page of newTab via a user accessible interface name in the Addons, rather than routing autour Manager inside Firefox. I use this add-on in a second profile that I use for my favorite sites

• Display the icon change the number of columns

  I'm sure it must be a way to change the number of columns in the display icon, not the space between columns, not the size of the icons, but the number of columns, for example, that dumpster has 4 columns and I want to see those hidden on the right I have to use the scroll bar, I want to do I want to see ONLY for columns of the filling finder window?

  Thank you very much

  Roger

  "BTW that seems to only happen when I consult with ANY ' arrange by" or "sort by"!

• How can I change the columns in File-> Open views program?

  I use El Capitan 10.11.3 on a MacBook Pro. I start with a clean system. I copied my files from my backup and reinstall my programs.

  This created a problem, seeking to resolve by changing the column headings in the views of program "file-> open.

  Whatever program I use, when I open a file, the window displays currently "Date added". It is of no use to me as the "Date added" to all my files is exactly the same - date, I have copied them on my own hard drive brilliant from my backup.

  In finder views, I can opt to display "update" instead of "added". So I order the files by date, whenever this is useful.

  However, whenever I try to open a file in a program, it is impossible to find things by date, because they all have the same "date added". I need to be able to see the "change date".

  I find anywhere that allows me to change this, either in the system preferences, or when opening a specific program. Don't I found clues to aid or the forum.

  Can someone tell me what I need to do?

  Thanks in advance.

  Mike

  Right click on the headers (if in list view) and select the headers you want to see.

  

  Alternatively, use the Arrangement to organize the desired date.

• Set the value of a checkbox in a column of a tree control

  Hello

  I couldn't ' find the feature set/get the value of a checkbox in a column of a tree control.

  Thank you for your help

  Bertrand

  Hi Bertrand, this discussion should help you in this task.

• Change list font size of point in the Tree control

  With the help of Labwindows/CVI 2013

  Is there a way to change the font size for the list items in a tree control?

  Thank you

  John W.

  jwinterb wrote:

  Thanks for the reply.

  This seems only to change the label of the control.

  Yes...

  I don't think that the boxes can be designed in a way

• How to change the font size of the content of the control tree programmatically

  Hello
  Programtically can I change the size of police of the parent element and a child in the tree control.

  In my application, the parent elements and children evolve programmatically. That is to say the content of the tree control is not constant it is dynamic.

  I'm using labview 8.6

  Thank you
  Assumptha.

  of course, it worked

• Windows Media Player - change the columns that appear under 'Now Playing'

  I would like to change the columns displayed in the views now play and Windows Media Player play list.  The factory default is to show only the fields title and length.  It wouldn't be that big a deal this is something fairly simple to access the page layout options, hit choose columns and select the check boxes for the columns I want to show... but the title and duration are the only fields that it allows me to select from.  He still refuses to allow me to select anything else.  I know that there is a way to display more information, but for the life of me I don't remember how to do so that he can do.  Help?

  Hey,.

  I've recreated the scenario on my Windows Media Player. It shows all the info like length, side, title, album, artist to contribute. Appoint you.

  Scan SFC should be your friend.

  http://support.Microsoft.com/kb/929833/en-us

• Manager disc Snap-in for the MMC. Is it possible to change the order of columns. Or remove columns completely?

  Manager disc Snap-in for the MMC. Is it possible to change the order of columns.  Or remove columns completely?

  I would like to move the capacity;  Space free; Status; to be fair, Volume.  The page layout;  Type; File system; seems to me

  useless in this form.  If there is no way to change maybe someone at Microsoft may include this option in Windows 9.

  Hello

  I would like to inform that you can not change the order of columns or remove columns completely as it is by design. However, you can display or hide items in the console window.

  Hide columns in Diskmanagement:

  a. Click Start, type diskmgmt.msc and press to enter.

  b. click view and select Customize.

  c. you can select or clear the check boxes to show or hide items in the console window.

  I hope that helps!

• What is the best way to change a column type in the materialized view?

  Hello my dear friends,.

  I want to change a column type in a materialized view. VARCHAR2 NUMBER, so what do you recommend? What is the best way to do it?

  Thank you

  You can not change the data type of the column while there are data in the MV, so you might as well give up and recreate the MV with a TO_CHAR() around the column in question in the application of MV to get the data exactly as you want (be sure to include an appropriate format mask). That said, I'm fighting to think reasonable grounds to make such a change.

• How to change the data type of a column after the creation of the table

  It comes to my table desc

  SQL > desc job1

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  JOB_CODE NOT NULL VARCHAR2 (3)

  JOB_CLASS VARCHAR2 (30)

  CHG_HOUR NUMBER (5.2)

  OVERTIMECHARGE NOT NULL NUMBER

  I want to change column CHG_HOUR to store numbers up to 12 digits in length (including the decimal points).

  I tried the following and it did not help

  SQL > alter table job1 change column chg_hour number (6.6);

  ALTER table job1 change column chg_hour number (6.6)

  *

  ERROR on line 1:

  ORA-01735: invalid option of ALTER TABLE

  SQL > alter table job1 change chg_hour number (6.6);

  ALTER table job1 change chg_hour number (6.6)

  *

  ERROR on line 1:

  ORA-01438: value larger than the precision specified for the column

  where I'm going wrong?

  Hello

  I want to change the CHG_HOUR column to store numbers up to 12 digits in length (including the decimal points).

  I tried the following and it did not help

  ALTER table job1 change chg_hour number (12.6);