Change the default DPI for scanning in paint

How can I change the default values for scanning for painting so that each scan is 300 dpi?

I'll give you an answer. What the interrogator does not understand, is that MS Paint does not have a setting for the CIO. There is no default DPI setting in MS Paint. The setting is controlled by the scanner driver or scanner itself. MS Paint simply communicates with the driver for the scanner, which then continues to do the analysis, then once completed, he hands the digitized data back to MS Paint. Therefore, the parameters of the interrogator wants to know how to change are not in MS Paint. they are in the driver scanning interface. This driver determines how he manages the parameters after returning the scanned data to the connection/disconnection of call program, in this case MS Paint. Most of the drivers scan all right back to their default value. In the case of the user, it's 100 dpi, but another scanner, this could be 150dpi (common with many scanners a few years back), and by default most recent scanners often at 200 dpi. After scanning, you need to change the defaults anywhere from new, because once the scanner driver handed the scan back data to the calling program, it is no longer in communication with her. It doesn't matter whether you use MS Paint, Picasa, IrfanView, or any other program that connects to the scanner TWAIN. If you start with a scanner that has a default of 300 dpi, you would have thought that it was a question on. You can not insistent that no one answered your question if it is based on the wrong premise at first.

Some scanners allow control of the scanner itself. I use a HP (all-in-One) printer/scanner combination. I can configure default to the control panel of the printer/scanner at 300 dpi or whatever value I want; I often put it at 600 dpi. Then I can scan directly from the scanner/printer and still get 300/600 dpi scans. By default the program to manage the registered file type determines which program will be executed when the image is sent to the computer. It could be MS Paint or IrfanView or whatever. Very often, I send the scans on a SD card on the printer instead. When I'm finished, I have a SD card with images scanned at 300 dpi that I take to another computer. Because the scanner/printer has been set to use 300 dpi by default, MS Paint, IrfanView or any other program that launches a scan will get also 300 dpi scans.

What the questioner needs is a scanner which allows its default value to or one that is default to 300 dpi in a first time. If you try a new scanner, you will find that the parameters does not return to 100 dpi, but instead has regardless of the definition of the scanner as default.

Given that most of the pilots to simple scanner always return to the default devices, and in this case, setting this parameter scanner is only 100 dpi, you can use a software that is specially designed to solve this program with its own resolution settings. An example is called "search". In its interface, you choose what the desired resolution, then when it communicates with the scanner, he deals with the change in the value whenever a scan is requested.

If you use color or grayscale is a separate choice outside the DPI setting. Some scanners can scan to a different resolution for shades of gray than they do for the color. Nevertheless, the problem and the solution is the same.

Tags: Windows

Similar Questions

  • How to change the default folder to scan hp 4680

    Hello

    I want to change the default destination for the scans folder.

    Hi aohp76 ,

    What printer do you have?

    I think that you will have to save the destination for each default shortcut location.

    Example: Photo to create the file save location.

    Saving photo location create e-mail.

    After that they were recorded for each shortcut, software should be failing at this default location for saved.

    If you still have problems with the default location, recording does not, on the Sava to the window Options to save file, check 'interrogate these Options at the time of backup. This will allow at least allows you to select the new destination.

    Most likely, if the software is not to keep the settings by default, the software might has been corrupted.

    Uninstall and reinstall the printer software.

    Please let me know the results.

    Thank you.

  • Change the default setting for files...

    Is it possible to change the default setting for effects of pixelization at 300ppi instead of 72 dpi? And is it also possible to have "Align new objects of pixel grid" unchecked by default? I realize I can change all of these settings when I create a file or after, but I would like them to be my default settings. I'm under Illustrator CC on Windows 7. Thank you!

    Create your own profile document containing these settings

    http://blogs.Adobe.com/adobeillustrator/2009/05/startup_profiles_a_great_tool.html

  • I want to change the default printer for Firefox how can I do this?

    When I choose to print in Firefox it uses my printer copier not my default printer. So how can I change the default printer for Firefox?

    In Firefox 'by default' is the last used printer. If you switch to a different printer, Firefox to remember that a new 'default' - unless you have disabled this setting in all: config. Print.save_print_settings

  • How can I change the default zoom for the new tab only?

    The new tab in Firefox 33 zoom is too high to see all 12 of my thumb nail. I changed it using ctrl - but the next time I opened a new tab, the zoom is 100%. How can I change the default zoom for the new tab only?

    I posted a style rule to shrink the tiles, which allows several of them on the page, but naturally reduces their legibility. You can experiment with the dimensions to find a look that works for you.

    https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

    I use the Stylish extension to experiment because of its preview function that allows me to see the effect quickly. You can install it from the site of modules, then after restart of Firefox while searching for his "S" icon in the toolbar to manage Styles so you can edit and experiment.

    https://addons.Mozilla.org/firefox/addon/stylish/

  • How can I change the default language for the spell checker? -solved, somehow...

    As the previous thread was closed without a real resolution - https://support.mozilla.org/en-US/questions/941350?esab=a & s = & r = 0 & as = s

    I managed to solve this problem on my end by reinstalling just firefox using the location of the language of the dictionary by default that I wanted to leave here - http://www.mozilla.org/en-US/firefox/all/

    A shame that the main download page does not select the relevant location for you and still more for changing the default language for the spell checker built is so much kak. Well.

    Right-click web page

    • [x] check spelling

    Language > choose language for spell check...

  • How to change the default path for documents and settings

    How to change the default path for documents and settings

    I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

    Hello

    I suggest you to download TweakUI, this could help you or get you headed in the right direction
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

    Also this KB could help as well:
    http://support.Microsoft.com/kb/236621

    It will be useful.

  • Changing the default settings for printing in Office Picture Manager

    Anyone know how to change the default setting for printing in Office Picture Manager?

    I have a user who clams that when they try photo printing settings in Office Picture Manager has been configured to print bac2 and paper 4 x 6.  Now when it prints, it must use the drop-down list boxes to tell it to print from bac2 and paper 4 x 6.
    I changed the default settings of the printer to print from the bac2 and use paper 4 x 6, but they must still use the drop-down list boxes in Picture Manager.
    Thank you!

    Although I maded the changes to the properties of the Windows printer I had to do that to solve the problem.

    To solve the problem:

    1. once in the print of the image window there is a link 'Options '.... "at the bottom right.

    2. once it's a click a print settings window that opens there. You will need to click on the link 'printer properties '.

    3. now the printer Document Properties window appears. Change of Source paper and media here.

    4. click on the OK button and now it's good to go.

  • Change the default search for small native browser (Lollipop) engine

    It does not seem possible to change the default search for the small browser engine.  I would like to change from the current, Google, DuckDuckGo or similar.  Anyone know how?

    FYI: the 'small' browser is the first reached by pressing the button of the Application selector and selecting the browser available by default in the list of small applications at the foot of the screen.

    1. open the small browser
    2 menu
    3 settings
    4 Advanced
    5. set map search engine
    6. Select a different search engine

  • Change the default format for burning discs of this system active files in the ISO image format

    How can I change the default format for burning discs of this system of active files to ISO image format?  I don't want the active file as the default system and really don't want to have to choose what I want to use the default every time.  It's boring. I have Vista x 64 on my computer and have not yet adapted to all the changes in XP.

    Thanks, but it's not useful.  It is more that an 'improvement' Microsoft did that, as I fear, is a total and far failure to be an improvement.  It also means that I'll just use a 3rd party program to burn all my CD/DVDs.  You know if I wanted to be able to remove, reformat, etc.. CD/DVD I would use those rewritable.  That's why they exist.

  • How can I change the default icon for a file type

    Hey there,

    I know I did in Windows XP and I am hoping there is a way to do this in Windows 7.

    How can I change the default icon for a file type?

    I want to have all my .sql files appear with a regarless of the specific program's icon is defined as the default program to open with.

    I did some research, but he has only led hacks registry, I tried but not lucky? Does anyone know of a way?

    Here is a free software that will do it without risky registry changes.  Of course I would recommend when even take a few seconds to create a system restore point before using it, just to be sure.

    File of Type utility for Windows 7: http://types.sourceforge.net

  • accidentally, I changed the default program for the openng exe files

    accidentally, I changed the default program for the openng exe files now I can't reverse my mistake and a lot of things on my count no longer works... I cnt play games or open all programs... what should I do?

    http://support.Microsoft.com/kb/950505

    Note at the beginning of the article that it says that Windows 7 users should go directly to the "Fix it myself" section

    Tricky

  • How to change the default setting for Australian News & Sport?

    How to change the default setting for Australian News & Sport?

    What setting, probably your browser home page, and how you do that depends on what browser you ar using.

    If using IE opens this page, then click on the "gear" icon to the rt at the top of the page, select Internet Options and look in the general tab

  • Change the default ports for http and https

    Hello

    I'm trying to change the default ports for http and https

    I have a 506th PIX (which does NOT of NAT)

    I have the following: -.

    static (inside, outside) tcp 192.168.10.2 601 192.168.10.2 http netmask 255.255.255.255 0 0

    static (inside, outside) tcp 192.168.10.2 602 192.168.10.2 443 netmask 255.255.255.255 0 0

    access-list acl permit tcp any 192.168.10.2 eq 601

    access-list acl permit tcp any 192.168.10.2 eq 602

    Access-group acl in interface outside

    where 601 and 602 are the http port and https to be redirect to respectively.

    I changed the webserver accordingly

    I get the error message

    "No group of translation not found for tcp src outside:189.x.x.x/50232 dst inside:192.x.x.x/80" (trying to access port 80)

    "I also have ' fixup protocol http 601.

    I had access to the internal and external web server before attempting to change the default ports

    Any ideas where I'm wrong?

    See you soon.

    I apologise for not thinking correctly.

    the static method must be:

    static (inside, outside) tcp 192.168.10.2 80 192.168.10.2 601 netmask 255.255.255.255 0 0

    static (inside, outside) 192.168.10.2 tcp 443 192.168.10.2 602 netmask 255.255.255.255 0 0

  • How to change the default attributes for an index for a subpartition without data in it

    Hello

    The use of oracle 11.2.0.3 attributes and modifydefault for a partition, for example the tablespace can but can not use the same syntax for a subpartition.

    Is it possible to change the default attributes for a subpartition?

    ALTER index RTRN_CUR_CONV_IDX change the default attributes for the subpartition SYS_SUBP64934 RTRN_PART_201505 tablespace

    Thank you

    Refer to the section of the doc "a Subpartition template editing.

    http://docs.Oracle.com/CD/B28359_01/server.111/b32024/part_admin.htm#i1007904

    A Subpartition template editing

    You can change a model of a composite partitioned table subpartition by replacing it with a new model of subpartition. All subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS ) will now use the new subpartition template. Existing subpartitions remain unchanged.

    If you change a subpartition of a range model * composite partitioned table, then of range partitions that have not yet been created will use the new subpartition template.

    Use of the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:

    You will need to 'fix' the new model as in the doc example.

    By the example of partitions with just a line in them, we find the secondary partition with data correctly a tablespace name as expecetd, but 4 other secondary partitions always show the name of the default tablespace in user_ind_subpartitions.

    Any idea whay and if can change

    Change the template affects only the created NEW partitions/subpartitions. If you want existing subpartitions to a different tablespace, you will need to move it.

Maybe you are looking for