Change the graphics card on the new laptops Alienware 14,17,18

Similar Questions

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• How to tie two additional monitors for the new laptop Alienware 15 for the purpose of the game.

  So Im wondering how I'd go on the attachment of two additional monitors for the new laptop Alienware 15 for the purpose of the game. I hope no lag between the monitors. Is chaining possible? If it is still possible that would have my monitors need connections?

  Yes.

  Yes.

  N °

  N °

  If that's enough?

• I tell Lightroom to use the graphics card in my new laptop?

  Hello!

  I have a new laptop and have managed to transfer my photos, the catalog and LR parameters everywhere.

  There better than my previous specifications, including a decent (I think!) dedicated graphics card.  I have integrated graphics before so don't know how it works.  I must say applications, such that Lightroom, to use the graphics card, or it will be automatically be done by the software/operating system?  If I don't need to do something, it's to each software (like Lightroom), the parameters of the computer, or in some third-party control software?

  Thanks for your thoughts.

  Now Lightroom doesn't take advantage of the features in higher-quality graphics cards. It remains to be seen if that change at some point in the future.

• Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

  Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen, sometimes flashing. It is sometimes difficult to use the screen, especially when it has a dark background. It is a HP Desktop quad core with card Nvidia GEForce 9600.  I tried to roll back the driver, but that didn't help. I assume that the driver I need is no longer available. I also went to Nvidia to try to find a better driver that would eliminate this problem, but no luck.  Before, this came with an update on Vista, & I could correct in the way to roll back the driver. Any help would be appreciated.

  Go to www.nvidia.com and download the WHQL 306,97 drivers updated successfully.

  With the installation of Windows 8, Microsoft provides only the "bare" minimum drivers in order to complete the installation of Windows.

• Fonts Zapf Dingbats corrupted on the new laptop

  I move to a new laptop. My old laptop had Windows XP SP 2, 8.0p277 of FrameMaker and Acrobat Distiller 8. I had 2 fonts Zapf Dingbats, which worked fine on my old laptop (ZapfDinbats and ZapfDingbatsStd [OpenType]). However, on my new laptop, when I try to install the version of .pfm of ZapfDingbats Zapf Dingbats, I get an error of corrupt police. The new laptop has following applications: Windows XP SP 3, FrameMaker 8.0p277 and Distiller 8.0. Other people in my team have downloaded and installed this file without any problem. I did some reading on the Forum about this. But I have not yet found a solution to my problem. Could someone help me please? Someone said a parameter without any detail of the bios. I wonder if I need to do something like that here.

  tc_trumpet wrote:

  Cannot install the police "ZapfDingbats (Type 1)".

  File '... \zd___.pfm ' is invalid or damaged.

  It is possible that your new laptop has a Nvidia graphics card? A Google search for "" XP SP3' of postscript fonts"reveals solutions like this:

  -------

  Open the Registry Editor (START, RUN and type regedit and click OK)
  Navigate to the following key - HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\SessionManager\MemoryManagement
  Add a new REG_DWORD value - change the name of the value for SessionImageSize value (decimal) 20 and then restart the machine.

  -------

  Found in a German Windows related forum, where the thread describes exactly your problems (solution comes from DELL). Maybe it's worth a try.

  Edit: Here's a blog in English which gives the same solution (scroll to the end of the page):

  http://onetruth.blogsome.com/2008/06/10/Adobe-OpenType-fonts-Windows-XP-SP3-and-NVIDIA/

  Bernd

• Installation upgrade memory in the new laptop (E8730w)

  I just got my new laptop and was dismayed to see that I obviously have to install the 2 GB memory upgrade that I ordered.  When I'm ready to install it, I will contact HP technical support.  I'm interested in the big picture right now.  The laptop has installed Windows Xp and Vista, stored on the hard drive.  No matter if I use the new laptop for, say, from the user's manual before as I have added additional memory, or is it better not to use the laptop until I have all of the memory (2 GB original and 2 GB upgrade) in place.  I hope that this process will be no more complicated than to install an ethernet card in a years office 5 or 6.  Where can I get good screwdriver to open the module compartment memory?  From my experience, it is easy band, the head of a screw phillips, especially a small head, if there is no appropriate screwdriver.  I'd appreciate any idea on these issues.

  I don't think that no matter how long you use it before you install the memory. Regarding the screwdriver, I use a 41678 artisan to work on laptops with screws Phillips. It could cost $ 1.69 at any Sears and any tech tools for perhaps $15 will be a very similar small Phillips. You will know if you are stripping it, so stop everything. Memory installation is much easier than to put a PCI on a desk. Relax its all good.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Installed CC on the new laptop, why am I allowed only trial version?

  Initially, I bought the CC and installed on a Macbook pro. Now, I bought a new Macbook pro 2014 and installed CC, but it only allows me to run the trial version. As far as I know, CC allows the software to be installed on both machines at the same time and since I'm logged in with my Adobe ID on the new laptop, it should recognize that I have a license, or not?

  What can I do to change trial version of standard license?

  Thanks for the confirmation of Martin. I see that you have two different accounts with Adobe. This account for Kingdom studio has your subscription. I would ask you please use this e-mail address to activate the product on the target computer.

• Need help to change the new "new tab".

  My new custom tab, google, is no longer opens. New tab in Firefox is shit, how can I change this back?

  I used the topic: method of config to change it for a while, but now the chain is simply ignored.

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your home page on the new tab - if Google is already your homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want the cursor to move in a search box in the page: Try https://addons.mozilla.org/firefox/addon/custom-new-tab/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute new tab and new tab custom

  After installing one of these extensions, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab replace or custom new tab and click on the Options button. (See first screenshot attached).

  New tab Override

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Custom new tab

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See third screenshot attached). I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Success?

• I have sync firefox on old laptop checked how do to the new laptop

  I followed the instructions and sync old laptop and it is checked... now, I opened the new laptop, Open firefox and where do I go from here... Thank you

  Enter ' subject: accounts? action signin ="in the URL bar, fill in the fields and click"Sign in. "

• How to download purchased new music on the new laptop when first download unsuccessful on the old machine?

  I downloaded a few songs on my very old laptop that doesn't work: using the new laptop, iTunes tells me that I already bought the but I don't see any way of the re - download: maybe because I'm in France? What can I do to get the music I paid? Thanks in advance!

  Are purchases on the iTunes store in France? You must be in a country to use his shop (including redownloading), which is part of the plan of the store, so while you are in France, you can only use the Bank of France (and potentially to re-download your purchases Bank of France). You can redownload will show in the purchase link under quick links on the right side of the home page of the iTunes music store (assuming you have not hidden their cloud, and if they are still in the store).

• I used windows easy Transfer to transfer data to the new laptop, but the Favorites do not show up. How do I get my old favorites?

  I used Windows easy transfer to move the data from the old to the new laptop. Bookmarks of Firefox has not been transferred. How can I get my old favorites for the new machine? Thank you

  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Windows Vista and Win7:
  
  drive: \Users\Windows login user name\AppData\Roaming\Mozilla\Firefox\Profiles\profile_name

• Can I change the new memory and at the same time to replace the Rams?

  Can I change the new memory and at the same time to replace the Rams?

  If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

  Please do "about this Mac" in your Apple menu to get this:

  

  Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

  With the exact submodel we can better advise you of any available upgrade paths.

• What version of Firefox options do I have to use Firefox on the new laptop running Win 7 64 bit, and how do I move bookmarks current laptop running Firefox 3.5.13 again laptop?

  Currently running on the laptop using Windows XP pro sp3 Firefox 3.5.13 and want to move my favorites to a new laptop. New laptop using Win 7 pro 64 - bit OS. I've read too many conflicting reports on Firefox and Win 7 and Firefox works on a real 64 - bit version. What are my choices for a stable browser for the new laptop and what specific version of Firefox is recommended, and the advantages and disadvantages of this suggestion? (I think we can run Firefox 32-bit version in the 64-bit environment, but which is the best choice?) I have not installed Firefox on the new laptop yet and am eager to dump IE. It is displayed for my old laptop. Thank you...

  Mozilla working on a 64-bit version of Firefox, but it's a way off. Currently, the only release versions are 32-bit, and the next major version will be also only 32 bits.

  I recommend that you install the latest version of publication (3.6.10) available since http://www.mozilla.com/

  To copy bookmarks, follow the procedure described in the article restore bookmarks from a backup or move them to another computer to save a json file, you can import (restore) on the new laptop. You can copy more bookmarks, for details, see back up and restore the information contained in the Firefox profiles and backup - MozillaZine Knowledge Base Profile. The last link includes a third-party utility that can make the process easier.