Change the length of a PSD

Similar Questions

• How can I change the length of a photo in iMovie? I can't drag the edge because the cursor is red.

  I have a problem in iMovie 10.1.2.  I can no longer select a photo and to extend its length, i.e. from 3 seconds to 4 seconds. My cursor is red and I can't return the normal cursor.

  Hi, jhskyline,

  To change the length (duration) of a photo in iMovie 10.1.1 (latest version), select the photo in the timeline panel, and then click the Info button in the toolbar at the top of your screen.  It is one that has an 'i' with a circle around it.   On the right, you will see a box of duration.  Type in the length you want and press return on your keyboard.

  Another way is to expand the line of time slightly with the cursor located above the timeline and right next to the settings button.  Then, you can select the photo and drag his edge to extend.

• You cannot change the length of the transition from photo album

  Does anyone know why I can't change the length of one of the album transitions four other than 16 frames photo?  The transition moves way to fast to a half second really give me the effect I was hoping.  Working with fcpx 10.2.3.  Running on an iMac, El Capitan, 10.11.3.  Any thoughts?

  The duration of the transition is controlled by the amount of available handles extra beyond the edit point. To increase the duration, you may have the trim, the shots to put at the disposal of the media more. Hand and waving of the Edit with the tab at the top of the transition point.

  

• Windows Movie Maker 2, 6-How do I change the length of time of the image

  Easily change the time

  Windows Movie Maker 2.6 can I change the duration of an image easily without leaving the storyboard / timeline? It takes too long to delete images and report them to the timeline/storyboard. If possible it is possible to easily select all the images I want currently on my slideshow and you change the length of time from there?

  Windows Movie Maker 2.6 can I change the duration of an image easily without leaving the storyboard / timeline? It takes too long to delete images and report them to the timeline/storyboard. If possible it is possible to easily select all the images I want currently on my slideshow and you change the length of time from there?

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Microsoft Movie Maker - cannot change the length of each clip.

  Cannot change the length of each clip on Microsoft Movie Maker.

  I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

  I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

  Thank you

  Cannot change the length of each clip on Microsoft Movie Maker.

  I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

  I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

  Thank you

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• BlackBerry Smartphones change the length of your cycle

  I love the phone, but the only thing that makes me mad is the length of the phone rings before going to voicemail.

  My only rings for 10 seconds, regardless of the type of ringtone, before the voicemail of storm cuts. I'm lucky if I can look to see who the caller is, and still less y answer!

  Is this normal? (hope not). How can we change it?

  I'll answer my own question, I'm afraid! I rang my network to check with them and they gave me the code to change the length of the ring. He is about 30 seconds.

• How can I change the length of a page if keeps bouncing back?

  I am changing the length of a page manually using the page but when I try to drag upwards or downwards using the handles and release it bounces back to the size it was. This is the case even with page masters. I turned off as I just get rid of the excess space, leaving only liquid content. Advice? I include a screenshot. The black box is supposed to be here.

  

  Thank you

  Hold down the Alt (Option) key while dragging and it will remain.

• Cannot change the length of the slide in simulation software

  I use 7 Captivate for the first time. I had a version much older, but rarely used.

  I recorded a simple software simulation which should be a piece of cake, to edit and produce, but do you have a problem I do not know how to solve. Simulation includes a component screen is clicked, then slipped and fell into a new location. I can't change the length of the slide that shows the movement of drag - move. It has a length of 6.5 seconds, which is painfully and excessively slow and there is no way I can find to shorten.

  I can't drag the end of the slide on the timeline, right click did not produce anything that is promising in the pop-up menus and the Properties Panel has a field of time, but when I select the 6.5 seconds and change, it is just 6.5 seconds immediately after.

  I remember this kind of thing being very simple in previous versions of Captivate. No more, I guess...

  Thank you

  -Jennifer

  Hello

  Could check you this slide, has created a video demonstration for this slide, because default recording demo Captivate 7 creates the video demo for drag-and - drop and mouse wheel actions.

  If it has been registered as a video demo, it will show as a red line BarrΘ in the chronology of this slide. The duration of the demonstration video can be increasedbut cannot be decreased.

  Thank you.

• Plugin entry hidden - cannot change the length

  I use a lot the hidden plugin. But the strange thing is that it doesn't have a "length" field, so by default at 30. In order to change the length, I have to change to a text field, and then change the length (for example, of the 15 for the phone number) and then to change the return type of entry hidden. The length is then shorten.
  
  The masked input plugin can be modified to include the length field? It always seems to use it.
  
  Robert
  http://apexjscss.blogspot.com

  Hi Robert,.

  Are you talking about the duration of the field or the number of characters that can be entered.
  Do not have access to the source code now from my iPad, but in the definition of plugin you can check if the checkbox for the width of the field (don't remember the exact name) in the standard attributes area is checked.

  You have downloaded the plugin from http://apex.oracle.com/plugins or use the copy of the sample application?

  Concerning
  Patrick

• dynamically change the length of the text element

  Hi all
  can it is possible to change the length of the dynamic text element without use of CCP.
  
  Please answer...

  Hello
  

  Read this article

  
  François

• Rules move when changing the length of InDesign CS5

  Whenever I change the length of the rules in CS5, the rule will then proceed to jump all over the page. Is a simple adjustment I am on? Really slows down the workflow when you need to change a rule in length and then move the rule to where he was. Any help will be appreciated. Thank you.

  Who just sent a lightning bolt through my brain. Is the link beween the length and height fields? If this is the case, try to turn it off. The status of the settings in the control panel for 'Dimensions include srtroke weight' and "Adjust STROKE weight when climbing" can also come into play.

  A tip would be a factor, if you actually have the end caps, but race position (Center, inside or outside) could make a minor difference if time and whose weight dimensional scaling are enabled.

  It is also quite easy to accidentally move when selecting something, but I don't want that, since you say that change happens afer you type a number in the field of reduction.

• Change the length of the line

  Hello.  Me once again.

  I'm still working on my pulley sim card.  I have two wieghts hanging from a pulley.  When the user drags one down, another upward as a result.  I'm trying to figure out how to make the line representing the string grow and shrink by moving the weight.  I drew the line like this:

  var lineW:MovieClip = new MovieClip();
  addChild (lineW);
  lineW.graphics.lineStyle (1);
  lineW.graphics.moveTo (178,127);
  lineW.graphics.lineTo (weight_mc.x, weight_mc.y);

  But I don't know how to change the length.  I tried the new route of the line in the Enter_Frame function which shifts the weight, but it added to the line without shortening it.

  Any suggestions?

  You want to make a lineW.graphics.clear () so that you redraw the line when you need, and not only add beforehand.

• How to change the length of line objects

  Hi all

  How to change the length of the line objects.

  I know how to change the width or height of the elements.

  Utils < Facade::IGeometryFacade > ()--> (ResizeItems)
  itemList,
  Transform::PasteboardCoordinates (),
  Geometry::OuterStrokeBounds (),
  refPoint, Geometry::ResizeTo (newWidth, newHeight)
  );

  I know the new length and PMrect of the line item before moving.

  What I want to know is how to get the new width and height of this.

  Thank you.

  Fujimori - Satoru

  Find your old address of trigonometry and read the part about the Pythagorean theorem. This will give the scale factor you need to get the old PMRect to the new

• change the length of field

  Using database Oracle 9.2.0.5 on Oracle Enterprise Linux and Oracle Report Builder 10.1.2.0.2 on Microsoft Windows XP Professional SP2.
  
  I have changed the length of a varchar2 column in my database from 4 to 8 and to update the fields that correspond to this column in my reports.
  
  How this is done?

  Open your query, add space and press OK... your domain should now reflect the changes made to the database.

• change the length of the attributes in the advanced search

  JDeveloper 11.1.1.0.2 and JHeadstart 11g TP1.
  
  I have a question about changing the length (width) of ADVANCED search attributes in JHeadstart:
  
  I have a varchar2 field (6) and in JAG, I used the following values:
  Java type = String
  Display type TextInput =
  
  In my application this field has 6 characters (= OK).
  
  But when I use the search advanced in my application the field is much longer than 6 characters. I can fill in anything I want. Is there a way to change that, so I can use only 6 characters in the domain of research?

  OK, it's because in a search item, you can use wildcard characters as much as you want: "%b % cdef to %.
  If you want to restrict the maximum length, you need to make a custom template for findTextInput.vm and add the following macro:

  #ITEM_MAXIMUM_LENGTH)

  Steven Davelaar,
  Jheadstart team.