Change the port Windows 8

Similar Questions

• Web application server - how to change the Port

  When installing LabVIEW, OR adds a process called "Application Web Server" (among a long list of other items) at startup.  It became an issue for our Windows users want to run our real application of Web server on their local computer.  My temporary work was about just disable the Web Application Server in the trunk to the port (8080) are available for other items.  My questions are the following:

  First of all, what kind of impact I look at developing LabVIEW programs?  This process is necessary if I want to work on the network applications?

  Second, it is possible to change the port number of the Web app server to avoid any problems that may exist?

  The Web Application Server is used by LabVIEW Web Services - only if you are not using/writing/developing LabVIEW Web Services, then it will not affect you.

  To change the port, open the Web-based Configuration utility NOR (normally on something like http://localhost:3582 /) and under "Web Server Configuration", you should see "Application Web Server" and you can select which port should be used.

  You can also access it Max by right click on "My System" and selecting "Web Configuration.

• Change the Port number of e-mail outgoing "587" as required to use the Comcast e-mail

  When my email out through Comcast did not all Comcast more, technical support told me that I had to change the number of Port for outgoing in Windows Live Mail beta 110 to 587.

  Worked well, until I had a system crash.

  When I reinstalled Windows Live Mail, I could fine is no longer the 'Tools' button in the status bar and by result cannot change the port number.  So, I can't send emails from Comcast of Windows Live Mail.

  The inbound port setting is apparently correct already, as I had no reception bad don't mail... sending mail.

  I hope it will work for you.  I use Windows Live Mail 2009.

  If you look on the left side of the window, you will see the name of your e-mail account.  (Underneath there is Inbox, drafts, sent items, etc.)
  You'll want to right-click on the name of the mail account. (Right above where it says Inbox.)
  Then you'll want to click on properties.
  A properties box opens.  You'll want to click on the tab "Advanced" on the right side of the Properties window.
  The first area is the SMTP (outgoing) port number.  You just want to change it in 587.

• How to manually change the ports for HTTP on the server vCenter Server

  Hello Experts,

  We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

  So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

  So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

  So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

  Suggestions forward. This problem is with the production servers.

  Thank you

  Karan

  This has been resolved... port has been changed manually and works very well.

• Manager profile - can I change the Port?

  Dear community,

  I have a little problem. A customer uses an OSX Server (to El Capitan. 10.11.2 + Server Version 5.0.15).

  The problem is, there is an Exchange Server that uses Port 443, so I can't use this port.

  My first test was a Port Forwarding of incoming: 8443 to macserver:443. I can reach the server, but when I log in, then it redirects me to the default 443 ssl port.

  I have checked the ssl httpd configuration, took a look in other apache-configs... changed ports 443 to 8443... but without success...

  How do you do that? Someone had the same problem?

  Thanks in advance

  No you can not change the ports using the Profile Manager. Even if you could change the ports at the end of the Profile Manager server, you have absolutely no chance of being able to change the equivalent settings built into iOS etc devices.

  Having two or more public IP addresses different so that the Exchange Server can have its own without conflict with the Profile Manager is an option that most of the larger organizations would use.

  It maybe by using a reverse proxy server could also be an option. The reverse proxy server would transmit 443 traffic to any server, it is by looking at the URL, for example exchange.domain.com:443 gets sent to this server and the mdm.domain.com:443 is passed to the other.

  NGINX is the main reverse proxy server software.

  PS. If it is not possible to overturn or transmit proxies the other ports used for profile, i.e. the NPP ports Manager, it is possible to reverse proxy standard web ports 80 and 443.

• on the Welcome screen... How can I change the default windows live address?

  on the Welcome screen... How can I change the default windows live address?

  Hello

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Live Mail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com

• has been able to play gta vice city and san andras and now I changed the frm windows XP to 7. but now I'm not able to play another game

  original title: card__ graphic

  I was able to play gta vice city and san andras and now I changed the frm windows XP to 7. but now I'm not able to play any other game m .is it probkem of bone or my graphics card?

  -----------------

• Can I hide or change the print window not pop up when printing?

  Original title: hide or print shown window?

  Can I hide or change the print window not pop up when printing? I want to still print but just to hide so it does not appear.
  Is it still possible?
  Thanks for all help

  Hi rustylzard,

  It is not possible to hide or change the print window when you try to print something.

  Hope the helps of information.

• How can I change the Menu Windows Contacts bar to show new Contacts, new Group Contacts, etc.. ?

  I have Windows Vista with Windows Mail. In Windows Mail, my Contacts are displayed, but the Menu bar icons related to the Windows images. How can I change the Menu Windows Contacts bar to show new Contacts, new Group Contacts, etc.. ?

  Original title: Windows Mail with Vista

  Missing the Windows Contacts toolbar buttons
  http://www.wintuts.com/missing-buttons-from-Windows-contacts-toolbar

  Vista - "New Contact" and "Contact Group on new" button missing
  http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.html

• How to change the port not MDS?

  I want to change the port default is 8080 of my MDS.

  Where should I change?

  Thanks in advance,

  Bala.

  Change the value in the rimpublic.property file, you find in MDS/config

• Windows Photo Viewer - how to change the default Windows Photo Viewer options so it will open the images directly in 'Real size' rather than the auto zoom

  Windows Photo Viewer - full size

  Hello

  Is there a way to change the default Windows Photo Viewer, so it will open the images directly in 'Real size' rather than the auto zoom?

  Thanks in advance, Yoni.

  Hi Yonikl,
   
  1 let me know the format of the file that is causing the problem?
  2. you have any third party photo editing and look at a software installed on your computer?
  3. do you have any recent software or the hardware changes on your computer?
   
  If there is any third party even software uninstall and check if that helps.
   
  You can follow these steps below to set the image at its actual size while watching.
   
  To display the image at its actual size, click actual size . To make the entire image enters the Windows Photo Viewer window, click on adjust to the window.
   
  For more information you can visit this article for assistance below.
   
  View and use your pictures in Windows Photo Viewer
  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer
   
  You can also try to download and install the Windows Live Photo Gallery and check if the problem persists.
  http://download.live.com/Photogallery
   
  If the problem persists then you can try these steps below to create a new user account and check if the problem persists.
   
  Create a new user profile.
  Now you must create a new user account and check the question of do you need to follow the steps
  below.
  a. open user accounts by clicking the Start button.
  b. click Control Panel.
  c. click on user accounts.
  d. family Safety.
  e. click on user accounts.
  f. click on manage another account.
  g. If you are prompted for an administrator password or confirmation.
  h. type the password or provide confirmation.
  i. click on create a new account.
  j.Type the name you want to assign to the user account.
  k.Click an account type.
  l.Click create an account.
  Now search for the question.
   
  If you still face the question, then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Is ACS 4.2 - possible to change the port of replication?

  Hello

  try to find out if she some tweek to change the port of TCP/2000 ACS replication to something else.

  I know that it is possible to make a different map policy or not to inspect the skinny Protocol in order to avoid the conflict, but not the solution I'm looking for. I was wondering if anyone knows of a different way to change the port of 4.2 ACS replication.

  Hello

  What is the version of the CSA, you run?

  If you then run ACS 4.2.1.15

  Problem : ========= ACS replication port re-configuration. Resolution : ============ Please follow the following steps: 1.       Interface configuration > Advanced Options > Check the checkbox ACS Communication Port Configuration. 2.       System Configuration > service control > Configure the Port to be used for the ACS Internal Communication (choose any port between 2010 to 2025)
  
  Regards,
  
  Anisha
  P.S.: please mark this thread as resolved if you think your query is answered. 

• Change the port number of the IOM servers

  How do I change port number of servers IOM to 14000 to some other port after installation/configuration and use of the server for more than a year.

  Connect to the weblogic console and stop the server instance managed IOM. Select the IOM server instance and change the port. Start it up again, then EM to change all internal references to the new port. Also change any other application integrated to reflect the change of port.

• After changing the port (1521 to 1525 in listener.ora and tnsnames.ora) OEM: the database is down

  Hello

  I'm installing Oracle Database 11 g 2 (11.2.0.4) on Oracle Linux 7.1.

  In short, what I'm trying to do now is changing the default port of 1521 to 1525.

  So I stopped the listener (lsnrctl stop) and then changed my listener.ora and tnsnames.ora:

  Listener.ora

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  BI =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = bi)

  )

  )

  And then changed the local_listener:

  SQL > ALTER SYSTEM SET LOCAL_LISTENER = "(ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1525))";

  SQL > ALTER the REGISTRY SYSTEM;

  Finally, I started the listener (lsnrctl start) again.

  Then I tried to connect using Oracle SQL Developer to the customer. The port of 1525 works perfectly well.

  The problem is, when I open the OEM (Oracle Enterprise Manager), it says: "the database is down. Please specify the credentials of the host to access the restart and database diagnostic tools," which is like this: http://imgur.com/oKLPW65

  So I logged on the account of the host, and it shows that the database instance, listener and the agent is all down like this: http://imgur.com/Bzr84bz

  It seems that the port used by the OEM is always 1521.

  What should I do? Can someone help me solve the problem?

  Thanks in advance.

  UPDATE:

  After changing the emoms.properties & the targets.xml (thanks to Elisabeth), you will need to reconfigure dbconsole using emca.

  So what I'm doing is decreasing the config:

  $ emca - deconfig dbcontrol db-rest drop

  and then create again:

  $ emca - create config dbcontrol db-rest

  Voila.

  Best regards

  Jerry Antonius

  Hello

  Try to change the port numbers in the following files

  Don't port no 1521 to 1525

  $ORACLE_HOME /_SID/sysman/config/emoms.properties

  oracle.sysman.eml.mntr.emdRepPort = 1525 (before 1521)

  $ORACLE_HOME /_SID/sysman/emd/targets.xml

  (Before 1521)

  (Before 1521)

• Change the port of the who

  Hello

  I need to change the port of cloudcontrol 12.1.0.4 7802 to 443, the default https port, firewall problem. There was a document in support of the oracle, but I find it anymore. I know I need to change the permission of det .apachectl, oracle.sysman.emSDK.svlt.EMConsoleServerHTTPSPort, ssl.conf and emgc.properties. Thanks for any help.

  Best regards

  Thomas

  Hi Thomas,

  To change the port of SGD, you can follow the MOS 1381030.1 note

  Thank you

  Sumesh.