Change the resolution after scanning

Similar Questions

• Impossible to change the resolution after a system restore - please help

  This afternoon I had my PC freeze when using iTunes. I tried to restart but got major error messages. I had to use "System Restore" a number of times that to have the machine to restart a version blown upward my wallpaper - no cursor, icons or the ability to use the button start. I finally managed to get back to a point where I still once restored the system but still once stood breathtaking version of the background, however, this time with the slider control. When I right click on customize, it does not open for me to change the resolution.

  Can someone help me? I am desperate because it's in the middle of football records and I urgently need my PC in working condition.

  Fixed. Corrupt graphics card. Downloaded and installed new drivers.

• zBook 14 - cannot change the resolution of the screen after update

  After I installed software updates the portable suggested to me, my screen resolution went suddenly from 1900 x 1200 at 1200 x 720 after reboot and it won't let me change it, not even to a lower resolution. I'm very frustrated, because I need the computer week next for visualization work and I really need the screen works well.
  
  It doesn't let me change the resolution. Graphics and display drivers are up-to-date and functioning according to Device Manager. I did a system restore, but that just do everything worse although the resolution worked once again thing, I had to run a repair of the start several times before that my laptop would be starting another property again. This does not resolve the issue, given that the display drivers are not working properly (videos have been viewed very badly) and even after updating the computer won't start again, so I had made another system of recovery and now I'm to the point where I can not change the resolution and starting to be really frustrating. Also, (if it even starts) Windows is constantly freezing, forcing me to hard reboot.

  Thanks for any help, that all the world can offer.

  This looks like a lot of problems, you have there.
  
  First thing I would say is to do a check of the basic material. Your laptop will be built Diagnostics the F2 button on the HP logo. The hard drive on a test extended (approximately 45 minutes - 2 hours) and the memory test. If these two go, consider downloading of UEFI diagnoses from the above drivers download section. In all honestly, I think this unnecessary step for most, it tells not usually defects that are already not obvious. But he should have a graphics test, if it will throw a failure even if it is faulty is another matter but when even, of a value of a test.
  If all else fails, download on the phone for the HP warranty.
  
  If anything fails, run the memory on memtest86 + for about 12 to 24 hours. Download you, it's free, burn it to a cd and the start of it. And it works simply, in case of error, you have a fault memory.
  
  If anything fails on any diags, then nothing is most likely false, cool reimageries windows probably will solve the problem and its probably just a form of spyware or corruption of driver or something. Backup your data, reinstall a new copy of windows.
  
  But in my experience, from doubtful, repairs etc... freezing randomly and other problems are often a sign of a failing hard drive. And diagnostic tests are not always 100% to pick up a failing drive. For the most part, but not always. So, if its still high reading after a reimage, review the reader always a potential source of the problem.
  
  To the extent where it won't let you change the resolution? What you mean? As for the option is grayed out? Can you maybe post a screenshot and a screenshot of your device with the extended graphics card Manager.

• Satellite 4080 Xcdt, small image after changing the resolution to 800 x 600

  Hello.
  After changing the resolution to 800 x 600 or less (while playing an older game BACK), the screen is reduced to the size of the postcard.
  Someone at - it an idea to solve this problem, (another driver display or s.th.)?

  Greetings, r.

  Hi Ralf,.

  In my view, there is a setting in the BIOS to force the screen image to stretch to fit the available space.

  Kind regards

• my desktop has rotated 90 degrees after playing a game that I changed the resolution. Tuning the pc turned off did not help

  my desktop has rotated 90 degrees after playing a game that I changed the resolution.  Tuning the pc turned off did not help

  Hello

  · What is the number and the model of the computer?

  · What game do you play?

  Try the following steps:

  a. right click on the desktop empty

  b. Select graphics options

  c. and change the setting to normal and check if that helps.

• How to change the resolution of the screen when the "input not supported" message after reboot

  I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
  the problem is,
  the "input not supported" message when I reboot the PC and does not allow me to do anything.
  He presents himself before the logon prompt.
  I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
  He returns to the State ("input not supported" and no prompt connection) after I restart the PC

  Mark,
  Thank you for your help,
  I tried in vain,
  I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

  Kind regards

  Claudio.

• Tecra S11 - change the resolution with FN keys gives an error

  Hello

  When I change the resolution of the screen with FN + space key combo, then background turns white and the icons on the desktop disappear. Windows 7 Professional / Tecra S11

  When you try, after FN + space press WIN + D (see the "D" esktop) combo and white background will appear.

  It's a Toshiba sw related issue or Win7

  Thank you

  Hi petersm,

  You may notice the behavior even if you change the screen resolution by using the options of the display driver?

  Maybe you need to reinstall Toshiba added value Pacakge that controls the FN keys

• Change the resolution of a project in iMovie 10.1

  Hello

  I'm doing a movie with iMovie 10.1 and for some reason any iMovie set my project at 4 K resolution, but I only need 720 p. Is it possible that I can change the resolution of the project? In the project settings, it shows the 4K, but I don't see an option where I change.

  Thanks for your answers...

  A draft resolution is defined by the first clip that you put in the timeline.  Create a new project, then put a 720 p clip in the timeline panel.  After that copy and paste all the old project into the new.  You can now delete the first clip if you wish.

  Geoff.

• My daughter played a game that changed the resolution of the screen on the reboot I see is no longer anything on the screen!

  My daughter has tried to play a game of old trails Oregon of a disc. It made him change the resolution to which she did not return to the stop down. Now, to restart, we are unable to see the screen after windows starts. Any suggestions? We are running Windows Vista.

  Hello

  Although she has changed the resolution, you should still be able to see a logo when the BIOS boot screen loads. IF this isn't the case then something else happens.

  To solve this problem I would boot windows in safe mode, so you can load windows into a default resolution. To do this, when you turn on the PC press, key F8 before Windows loads. (do this as soon as the BIOS screen disappears)

  You will be asked to choose from a number of advanced options, is the option you want to select:

  Turn on the video resolution (640 x 480)

  This will load windows in this resolution, so you can set it manually to your favorite resolution.

  Let me know how you go with it.

• HP OfficeJet Pro 8600 AIO: Cannot 'Edit analysis jobs' to change the destination folder scans

  Hello

  I just installed it on my new Macbook, but somehow I can't change analysis tasks. Once I click on this button, I get an error that says I have no scan software installed and he directs me to the HP download page. But, the download-only "HP Easy Start', which I installed it there. See the printscreen below.

  I already deleted and reset the printer and re-installed the software several times. The pilot is set to HP and not air one time.

  I want to change the destination of the scans folder, which should be in the settings after scan tasks, that I can't reach.

  What's wrong?

  

  Hello

  Download and install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now try changing the tasks of analysis once more and I want to know the results.

  Shlomi

• Changing the resolution of my screen. I have changed to the wrong setting and now I have a white screen

  On my screen, I changed the resolution and now when windows comes on, it displays the first "Windows XP" logo and then, when Windows actually opens, the screen is blank. I can't see anything to restore.

  juljil2006,

  pressing F8 immediately after your screen manufacturers and selecting 'Enable VGA' in the menu. Then I put just the resolution to 800 X 600. Then return to high resolution

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• How can I change the resolution to enforce my text smaller when I can't button?

  The text on my screen is so big that when trying to reduce its size by changing the resolution, I can't have at the bottom of the page where it says to apply the change.

  If talk you about Control Panel, appearance and personalization, display options, just selectSmaller - 100% (default value) or average - 125% and press on to apply the changes. Once you have made a change in the options, the apply button becomes the action by default for the key.

  Alternatively, immediately after selecting new font size, you pouvez press Tab once to divert attention to the apply button, and then click the key, but I believe that it is unnecessary.

• Change the resolution of normal-vista through Safe mode-vista

  Hello!

  I installed a demo version of this game of strategy, 'Starcraft 2 '. After installation, I try to play. However, without warning the game changes permanently my screen resolution to a value that is compatible with my monitor (says my Samsung TV/Pc monitor ~ "cannot display resolution")

  Even after restarting Vista, remains the problem of resolution. Still no display.

  Vista safe mode, but displays in another resolution and works very well (I am writing this message in SafeMode). Now, I can change the resolution here, but whatever the changes I make do not transfer to normal-Vista mode.

  If anyone, please tell me, How to change the display resolution of the normal mode, safe mode? Alternatively, how can I change the resolution, 'the eyes bandaged?

  I uninstalled and will avoid the game.

  I also tried the system restore, twice in fact, just to be sure. Picked dates from before I even heard of the release of the demo, but it still does not work. The display resolution is still off enough to leave my empty screen.

  Try the following, but do it in Safe Mode so that you can see everything on the screen...

  1. set DPI:
  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  2. resolution:
  Right-click on a free space of the desktop > Personalize > Display Setings > move the slider to the right or left whatever the case may be. Check your user manual, see if she tells you what resolution is for your computer. My laptop is using 1280 x 800 pixels.

  Here is a table of the guide line:

  Monitor 15 inch	1024 × 768
  17 to 19 inch monitor	1280 × 1024
  monitor 20 inch and liked	1600 × 1200

  
  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• 3007WFP - cannot change the resolution of 1280 x 800?

  Hi all

  My monitor was turned off for about a year, and recently I plugged it in and I can not change the resolution to anything other then 1280 x 800, which now is also marked as recommended (not true in the past). Whenever I try to change I get different by config behavior, but most of them, I get a black or some screen lines color resistance. Everyone has been through this, and are there alternatives that can be done at home?

  The only resolutions supported are 1280 x 800 (Single Link) and 2560 x 1600 (Dual Link). To get the best resolution of 2560 x 1600, the video card must have a port DVI - D Dual Link and you will need a DVI - D Dual Link. The left in the picture. Check these and after return.

  

• Change the resolution of the screen and the screen went black

  Then I tried to change the resolution of the screen and the screen went black.  I tried to restart, plug in my HDMI port on my TV... Nothing.  So I went with a system refresh (yes I'm sure it was a refresh and not a restore).

  The fact that there is no integrated procedure to detect the moment where that happens and return to the old resolution is annoying enough...  But now after that choose the system update and it would be only to reset the settings to default back and keep all the files (as he said it would be), I am extremely frustrated to know that it has deleted ALL my programs.  Program E-v-e-r-y.  This means that Chrome, Firefox, jGrasp, AutoCAD, all my programs Microsoft Office, all my Adobe stuff, my Visual Studio and so much more that I'm not naming.

  I REALLY hope there is a place where they were stored so I don't have to reinstall everything manually.  If not, then wow, Microsoft... We finished.

  Unfortunately a refresh as he said, only maintains personal records (program data), the data can be located in the "in the"Windows"folder windows.old folder normally C /: Drive, all modern apps should be kept."

  All programs of office/legacy (Chrome, Firefox, jGrasp, etc.) need to be relocated from their original sources

  Keep all of your programs, personal files (data), settings, the best option is to create a "Disk Image" - see link below for info.

  http://Windows.Microsoft.com/en-AU/Windows7/choosing-an-advanced-recovery-method