Change the rule VMW ESX Server disconnected

Similar Questions

• Microsoft Paint - how to change the rule in inches and centimeters

  How to change the rule in inches, centimeters, etc.. ?

  While in the paint, select the arrow down in the blue box in the upper left of the window.

  Select Properties

  Set the unit of inches, etc.

• How to change the name of host server IMO?

  Hi, guru.

  Is it possible to change the name of host server IMO?

  Architecture:

  Server A - Oracle RDBMS

  Server B - IOM: admin, IOM, soa.

  Version of IOM - 11.1.2.1.0

  (If possible) it is necessary to change the server A server B in host names. During installation, the FQN to the server host names have been used.

  The procedure for changing the DB server host name is clear and simple. The question is on the server of the IOM.

  Unfortunately, I did find the documents that describe the process of change for the IOM system hostname. But fortunately the problem has been resolved.

  Shortly, the process is as follows:

  1. in my case: db oracle 11.2, wls 10.3.6, iam 11.1.2.1.0, soa 11.1.6. System - DB Server + server of IOM.

  2 VMS when copied to the new server.

  3. change the configuration files of MAC, IP, two servers.

  4. change the host name of the DB server. Restore the dbconsole EM repository (if used).

  5. change the IOM servers configuration with wlst listeners.

  6. change the source URL with wlst database IOM.

  7 remove the cache, tmp, newspapers of servers.

  8. replace all references to the old hostname with the new host name in the configuration files.

  9 start the administration server. Change in $DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/em/hsz5x1/META-INF/emoms.properties configuration file

  10. restart Admin, start managed servers.

  11 change DirectDB, OimFrontEndURL, BackOfficeURL, Rmiurl SOA Soapurl URL in MS (change management of the cycle of life-11 g Release 2 (11.1.2.1.0) management), urls detail task human workflow.

  12. check the application code for direct reference for host name, change.

• How to change the rules to the scenario when the site is live?

  Hi all
  
  the requirement is to change the rules of the scenario without accessing VAC, because the site is live.
  
  Could you please provide the solution ASAP
  
  Thanks and greetings
  user8729783

  You must replace the files associated with the scenario and then make an application restart for the changes to take effect.

  so on local or any other environment, you can change this scenario very by VAC, it generates the .sdl file updated, copy the changed files in your production (less/atg/registry/data/secnarios /...) wherever this .sdl file previous scenario is present and then restart the application.

• A delay was trying to send a command to the VirtualCenter or ESX Server.

  Anyone have recent experience with the following error and could perhaps enlighten us?

  Finished status: failed

  Final error: 0xe0009563 - a delay was trying to send a command to the VirtualCenter or ESX Server.

  Final error category: resource errors

  Thanks in advance,

  Phil Couto

  After some serious research. Found that Symantec Backup Exec agent VMware was not instant deletion after their creation.

  Created an additional snapshot and then delete all the snapshots. This all cleaned up...

  Kind regards

  Phil Couto

• How can I change the domain to a server of comment?

  Acrobat 9 on Windows 7

  In addition to editing the registry, how can I change the URL of a comment server which I use for exams?

  Earlier, I initiated a shared review but used only the host name of the server, not the fully qualified name (FQN) which includes the full domain name. Now, when I reuse this server for other comments that I initiate, I'm stuck with the unqualified name. People outside of my subnet cannot post comments on the server because the simple host name is not known on their subnet.

  How can I change the properties of this server so clients use the FQN?

  Jerry

  Yes, you can change the server name in the registry. After change, all the comments that you initiate with this profile will point to the new server location.

• Change the rules % available for GB available free space

  Could someone help me with the change of the rule for using Drive VMW Machine virtual Locical? to monitor the free space in the UK. I have everything else works I like execpt this.
  Thank you

  You should not change the built in rules. They were overwritten when you upgrade. I recommend that you copy all the rules you want, modify them, and then disable the default rule.

  To answer your question... I have already done the work to transform this rule in GB instead of %. Discover my cartridge vBundle-1 which is an add-on free for vFoglight.

  Here is the link to the cartridge and documentation:ftp://vbundle:[email protected]/

  Chris Walker

  Quest - group of Server virtualisation

• In Windows Mail, I need to change the incoming Pop IMAP server info

  In Windows Mail, I need to change the server incoming IMAP POP on my existing account info. Windows Mail is not allowing this change. Is it possible to change or should I create a new account?

  You need get the settings of your mail server that you do not even mention.

• Please - need help changing the rules to exclude certain hosts/guests

  I need to find a way to exclude certain hosts and invited only a few rules, and I can't seem to understand.  Here is my example.

  I have a guest who I want to disable monitoring of the 'Memory of Virtual Machine of VMW Swapping' State.  The guest I want to exclude the rule is called "ucapmil1 (QAUCL).

  So I in the field field of application of this particular rule rule:

  "VMWVirtualMachineMemory where virtualMachine.name does not correspond to ' ucapmil1 (QAUCL)"

  I also tried

  VMWVirtualMachineMemory where monitoredHost.name! = 'ucapmil1 (QAUCL).

  Neither seems to make a difference.  Can someone point me in the right direction?  Thanks in advance.

  Try using esxServer.name

• Address IP of the Service console & Esx server name

  Hello

  How to get the address Ip of the service console & the name of the ESX Server in the data center based on the cluster?

  Property 'Networkinfo"of the esx server does not give advice for Service console Ip address to me.

  Thanks in advance for the answer.

  Try it like this

  foreach($cluster in Get-Cluster){
      Get-VMHost -Location $cluster | `    Select @{N="Cluster";E={$cluster.Name}},
          @{N="Host";E={$_.Name}},
          @{N="Console IP";E={[string]::Join(',',((Get-VMHostNetwork -VMHost $_).ConsoleNic | %{$_.IP}))}}
  }
  

• How do I know the thrue VSphere ESX Server?

  Hi all!

  I have an ESX 4 server. I can connect with Putty, but the web server is not configured.

  The ESX seem to be connected to a server for VSphere.

  Is it possible, through a connection of PuTTY, to know the name or IP address of the server BSphere?

  Olivier

  I guess when you say vSphere Server, actually talk you to vSphere vCenter that vSphere is simply the family name composed of 4th generation of vCenter and ESX (i) products, etc.

  Anywho, yes it is possible, there are probably a few ways to do this (via newspapers, etc.)

  And here are two:

  (1) using the Console of Service of ESX classic

  Take a look at:

  /etc/opt/vmware/vpxa/vpxa.cfg
  

  The result will be something like:

  A.B.C.D # ESX Service Console IP
  E.F.G.H # vCenter IP
  

  (2) using the API vSphere ESX or ESXi

  If you know how to use the API or managed object browser, there is a property that is ONLY defined if the host ESX (i) is managed by vCenter server defined by managementServerIp http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.host.Summary.html

  As we mentioned above, you can see newspapers go or vpxa so that should also have address discovery.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• Implementation of the array for esx server

  Hello everyone:

  This is my first post here, and I'm a newcomer to virtualization. I've seen given the task of putting in place an esx server. Now, I need to configure a processor computer double hearts HP DL380. I need to set up a 20 GB partition for esx and the rest of the disk space for the second partition for the VMs.

  My question is, what is the best configuration of raid for this scenario.

  Thank you.

  The best option will be to go for RAID 5 (HP RAID DDG), if you want a higher level of redendany (2 disk failures) go for RAID ADG (RAID 6). I recommend that you create a table and two driving logic. A first for the ESX operating system and second to the VMFS. VMFS to allocate a larger share.

• Y at - it no problem when changing the OC4J to WEBLOGIC Server

  Hello
  
  We need to develop a product in Jedeveloper 11 g. In development mode, used as application WEBLOGIC 10.3 Server. But during the mode of production, we must apply the EAR oc4J APPLICATION Server files.
  
  While changing this, I know my system work as such in the WEBLOGIC Server?
  
  If I have loss any specific fuctionalities Rich Ajax? Is everything working in development is necessary?
  
  Everything in Google search, I found, in JDeveloper 11 g oracle prefer WEBLOGIC instead of OC4j. Can someone tell the reason for it.
  
  Thank you
  Thierry.

  Thierry,

  OC4J is a java container in the OAS.

  The link you provided States exactly the same thing as I have indicated above, namely that the ADF applications would not be supported on OAS/OC4J.

  John

• WinXP SP3 explorer.exe how change the rules just click in the left pane (files) to double-click mode?

  Hallo,

  I did a new install of windows xp from windows xp professional with SP3 and found that the explorer.exe folders is always in the simple click (point to select) mode. I tried the folder option to put in double-click mode. But only the right pane is successfully changed. The folders pane remains in single-click mode. However, my fries are doing a new installation of windows xp slipstreamed with sp3 (original without MS) pro doesn't have this problem.

  I tried a solution days, only to find that it also occurs in windows 7, and install a tool called repair can fix it. But there seems to be no solution for xp sp3. Anyone who gets an idea how to change the mode of single-click in the left pane, double-click mode? Thanks in advance!

  Best regards

  Hi ziqumaijia,

  Are you referring to the toolbar of folders in Windows Explorer?

  By default, the toolbar of folders in Windows Explorer is by a simple click.

  Hope the helps of information.

• I can't change the rules on GBA 5.8.1.4.3

  Cisco Application Deployment Engine OS Release: 2.2ADE-OS Build Version: 2.2.2.015ADE-OS System Architecture: x86_64
  
  Copyright (c) 2005-2015 by Cisco Systems, Inc.All rights reserved.Hostname: ACS01-AAA
  
  Version information of installed applications---------------------------------------------
  
  Cisco ACS VERSION INFORMATION-----------------------------Version : 5.8.1.4.3Internal Build ID : B.462Patches :5-8-0-32-3

  I still have the problem with a blank "political access > Services > Service selection of access rules" after you apply the patch 3. Maybe because I deleted rule before, I found a bug.

  Correct, the rules are deleted before you install the hotfix.

  This State can be recovered by installing the hotfix.

  Patch will ensure that there are no other problems.