change the size of array without initializing

Similar Questions

• Change the size of the text in a saved image

  I am currently using Photoshop CC 2015 and I was wondering can I go back to the saved image and open in CC and change the size of text without having to redo the whole image again.

  Pixilated means that the text layer is converted just a pixel layer. Normally there are layers of vector/text, which can be edited. This is the file that you are using is a png, then there is only one layer and there is no layer to separate the text to change. You will need to edit the text and do it again.

• How to change the sizes of elements of array programmatically?

  Hi all

  I have a small question about changing the size of the elements in the array. I hope someone can help, because I am in a bind!

  I connect certain intensities of a range of fibers using a camera. For the calibration of the system, I gain a picture of the camera, click on the image points to divide it into areas of interest. I have my image to overlay with a grid indicating the areas of interests - for example a 4 x 6 picture. I then have to select fibers - or Kings - I want to connect from.

  I have a cluster type-def (a number and a Boolean value) to specify the number of fibers and to enable logging of this fibre power. I superimpose a (transparent) picture of this typedef on my image to correspond with the regions of interest. So here's my problem - I want to change the dimensions of the table for each control corresponds to my KING. I can resize the elements of law on the elements on the façade, but couldn't find a way to do it programmatically. The array property node > element of array > limits don't "change to write" it's the first thing I tried.

  Its only really important elements alignment with my Kings - so adding in the gaps/spacing programmatically would also work for me... goal again once I can't understand how to do this! I've attached a screenshot of part of my image with table superimposed to show you all exactly what is my problem.

  Thanks in advance for you help,

  Dave

  PS I'm under Labview 8.6 without adding vision on.

  Here is my cheat (and cheap) way if you want to get fancy and Center digital indicators and booleans, you could add shims on the North and west sides, too.

• How can I change the size of a photo book without changing the theme

  How can I change the size of a photo on iphoto book without changing the theme?

  Click the button change theme and in the next window, select a different size without changing the theme.

  

  Be sure to carefully check each page as with a different size, you may have questions of text, or all text in the text boxes.  Before ordering the book read it again according to this document from Apple: get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Support Apple. Save the PDF file to compare it to the printed version when it arrives.

  

• Difficulty the front Dimension of the array, but allow the user to change the size of the array

  Hello

  I know there are a few other posts on table and scroll bars but mine is a little different. I want to have the physical size of the fixed table control and allow the user to change the size of the array as required and a scroll bar if the number of elements exceeds the specified physical dimension. I wouldn't mind if, at the end of the scroll bar, the user sees an uninitialized element.

  Thank you very much

  Hello

  The problem I have with the property Num Row node is it seems to replace the scroll bar. Whenever I try to change the line number, the table automatically resizes its physical size on the front and the scroll bar has no effect.

  However, I solved the problem by taking row completely digital. I just said if the table size is > to a constant value (i.e. 3), add a scroll bar and my front panel dashboard to be a size larger than what the value of this constant is size. Once I begin to add values in sequential order and I get to the fourth value, the scroll bar is added and the scroll bar has a feature where it adds an element of null for you, so if I fill this null element I just increased the size of the table and another null element appears underneath.

  Thanks for the help

• Puzzled by changing the size of the array of Bell Curve (or made gaussien)

  I use an instrument which entered a table 1 d signal. When you draw the it, it looks a lot like a Gaussian function (it looks very good too).

  What I want to do is to change the size of the array of this input function (basically I want to increase the size of table).

  For example, when you look at the picture attached, you will see that the size of the curve in the picture on the left, which is the GROSS ENTRY, 70 =.

  What I want to do is to change this size to a number of interest (for example, let's say 80)...

  So basically I want to insert 10 new numbers in the table (in random places), but I want these 10 numbers to fit on the best-fit-the signal line (like you see in the image to the right).

  So I tried to use Gaussian worthy, and cubic spline worthy... etc but none of these features allow me to change the size of the table of the output to adapt.

  Any of them do not give you the equation of the line of best - fit either... so I can't solve Y for a known X.

  It is very important for me to continue my project.

  Thank you very much

  Look at the palette under Interpolation in the math palette.  You can find something that will work for you.  It will not add points on the equation, but should allow you to get more points along your curve.

  Lynn

• How can I increase the size of the text in applications without changing the size of the desktop icons?

  I have my desktop icons attached to the size I want, but when I open applications as e-mail text is tiny.  How can I change the size of the text by default without changing the size of the icons?

  Hold down the ctrl key and the mouse wheel. This should change the font size in some applications. Some applications also have their own settings of police out of their menus in things like or etc (for example). This will vary by app.

  For WLMail it appears this and this should offer some control on WLMail fonts used, but only the 2nd seems to work OK. This application there is a bug? and certainly it does not work for me.

• I want to export file to a specific size without changing the size of the contents of the layer. for example. the image in the layer size is 20 x 20 px, but I want the file exported in 40x40px with a transparent space.

  I want to export file to a specific size without changing the size of the contents of the layer. for example. the image in the layer size is 20 x 20 px, but I want the file exported in 40x40px with a transparent space. @divyamanian

  You can now do with the new export as a dialogue using the "Canvas size" section

• EP 6: change the size of the text box without changing the font size?

  OK, it took me awhile looong to finally install PES 6 (from 4 PES) and now it's been a Loooong time that I used it.

  4 PES, you just had to click on the text tool in the text box to see the squares bounding, and you can make the changes. In PES 6, it seems the only way I can get the bounding box to show is now with the tool selection... which of course does not change the size of the font as well.

  I did beaucoup Googling etc and that you can't find the answer. Help, please. I'm not a PSE newbie by any means. I used it for scrapbooking widely in the past which included a LOT of text resizing box... but it seems that 6 is designed differently than 4 and it is NOT intuitive at all. I've figured it out at some point, but it's been too long... > 1 year.

  Please help... need to finish scrapbooking for Christmas gifts...

  I wonder if what has been improved in later versions?

  OK people... it seems it's on my own computer performance issues! To do a break more significantly on areas bounding while using the text tool. I was so rushed... I had mice on and if something didn't happen immediately, assumed that he would not. Sorry for the trouble, but maybe this will help some other impatient soul like me!

• How change the size of thumbnails in Firefox 33?

  Vignettes on the new tab in Firefox 33, are enormous. I want to see 9 but I see only 3. How can I change the size of thumbnails to restore the way which they llok like in previous versions of Firefox?

  Thanks jscher to tell me that... works but...
  I spent four days, I was wondering what was wrong - crazy on this subject
  cause all of a sudden without clicking anything whatsoever
  they were big and there were only three
  He said it has been changed then right and I did nothing

  discovered only today when is firefox installed the latest version.
  from that moment, without knowing me
  cause, has been set up to do it automatically...

  no more!

  more in the other thread...

• Satellite Pro P200: Change the size of partition in Vista?

  Is it possible to adjust the size of the partition after installing?

  I have a Satellite Pro P200 with a shared about HARD disk:

  C: Vista partiton - 17 GB of free to 56 GB
  E: partition of data of-54 GB of free to 55 GB

  I know that the data reader is used by Vista to contain information of recovery.

  However, I would like to know if its possible to reallocate some of its spare production capacity at the Vista drive without compromising the recovery feature?

  Of course, you can change the size of the partitions after Vista installation.

  You can change this in the Vista Disk Manager s

  Here, you could choose the existing partition, and then you could reduce the amount of partitions. This free volume can be added to another partition, or you can create another partition.

• I don't know how to change the size and quality of the text on the screen on Windows 7

  I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

  I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

  Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

  Thank you all once again!   Best regards, Blondie blue.

• Resize the image sources - change the size of the images database

  Hi all

  I have a trivial problem, but I can't deal with it. I have a project with compositions called slides. Each slide have JPG image as layer and this image is assigned 100% to 106% Resize effect (two keyframes). The images have their own folder. I need to replace all the images but the problem is that the new images have different sizes, for the most part, they are bigger than originals. When I right-click the imported images directly on I don't see any options to change their size (single space reserved or solid). When I double click them to open it in a new tab I don't see no resizing tool and layer menu is grayed out for the most part.

  So far, I found that I have three possibilities:

  1. resize as a layer in the composition of each slider. Unfortuately I don't see any way to change the database size, so resize here means add another keyframe or change existing. If I change the first keyframe on the layer in the composition of the slide then I have to proportionally resize the last of them. There are about 20 slides this process would be quite painful

  2. resize the images before importing - with PSP, GIMP or same IrfanView. It would be a much better solution than before however, this means a blind resizing - without no preview as the composition. Whenever I want to change the size a bit, I have to import image again. Painful.

  3 convert the images to the compositions,

  Convert each JPG file in composition, put this composition as the layer to each composition drag next to layer JPG, transformation of copy of layer of JPG to the composition of the image layer and delete the JPG layer. Long process but the effect is exaclty as I want and the project is fairly durable for any other modification of the image. However, in larger projects where there are many effects assigned to layers, it would be very painful.

  So is there an easy way to change the sizes of the imported images database? I can't believe that in such a huge program like After Effects, there is no way for such a simple task. I believe firmly im just something missing.

  You can resize your layers in Ae with scale parameter. (transform-> scale). If there is no animation, you need not place a keyframe. for example, you can resize your layer to 46% and decide to evolve for a while, so the first keyframe will be 46%, and the last keyframe is 83%.

  Yes, I know that if you have layer with no keyframes for the scale property then scaling ways to change the size of its base. However, in my example, I have two frames - 100% and 106%. If I import large image so I have to resize. If im on the first keyframe, and then it wil change its size to 100% for example, 56%. But the last keyframe is not changed - its still 106%. So that means animation past from 56% to 106% - image develops much more quickly than in an original animation.

  But now I found that I can select all the points of the keyframe by clicking on the entire property scale and resize proportionally when I resize the image, all the points of the keyframe. It's the simplest and most effective solution for me!

  Thanks for the help!

• vRA 6.2: change the size of storage supply

  We have a bunch of different plans for use by different business groups.  All of them are basically the same with respect to the model used, the initial size of memory, etc.  Today, I was going to provision a virtual machine with a different disk volume, so I went in a model specific, selected the "Storage" tab and clicks on the icon change to change the size of the initial 8GB 20 GB, but it was gray (it allowed me to change the storage type, however).  I went to another plan and it would allow me to change the size.  I then went through all the plans and more would allow me to change the initial size available, but some would.  I went on all plans, reservations, etc. and can't see well or the box anyone would do this function or not, so I'm stumped at the moment.  Anyone has any idea how this feature is enabled/disabled?  Thank you.

  Here's a screenshot of what it looks like for the Blues who allow me to change the size of initial storage Setup:

  

  ... and here's a blueprint that does NOT allow me to change the size of initial storage Setup:

  

  All plans are commissioning of a VM tempalte? It depends on the size of the disk on the model?

  Or, were there the engine put into service since the plans, you can not change already. Please keep in mind that the action plan is also a container of management then maybe you can't change from there and need to create a new template?

• How to change the size and color of 'staticText '?

  Can anyone share please how to change the size and color of the object "staticText"?

  function buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ('pallet', 'Gear of Stress', undefined, {resizable: true});

  var txt is myPanel.add ("staticText", [0,0,100,20], "txt");.

  txt. newFont, fontSize, color?

  Return myPanel;

  }

  var myToolsPanel = buildUI (this);

  I did a quick test on a PC at the office and it seems that Gill without isn't a stock PC police. You could comment on these out or change them to a police stock as Helvetica or something. Once I removed that it has launched on PC very well.