Change the size of the monitor

I can't find how to change the size of my screen/desktop.  I have a new screen square, and it distorts the view of everything, so I want to reduce the height of what I see, but not the width.

Right-click any empty field office. In the pop-up menu, click on 'Properties', then click on "Display properties", then click on the 'Settings' tab, then move the slider to a resolution which essentially corresponds to the shape of your screen (there will be forms of screen if displayed when you move the scroll bar). Experiment with similar screen shapes and their corresponding resolutions to see which is the best and the strongest of your monitor. When you test the choice of screen resolution, it will open another small window, asking you if you want to keep this choice, or he will return to the previous resolution. If, after choosing a screen resolution, you think that the font size of the text is too small, then click on the button "Advanced" in this same settings tab, click the more choices of font size (120 dpi) and follow the prompts to complete the change.

Tags: Windows

Similar Questions

  • How can I change the monitor back to normal view. my screen is on his side. Don't know what I did.

    How can I change the monitor back to normal view?  Some how I turned it on the side.

    Saturday, June 1, 2013 16:21:57 + 0000, ElainePeninger wrote:

    How can I change the monitor back to normal view?  Some how I turned it on the side.

    The ability to rotate the screen image is a characteristic of your video
    card, to help work with instructors who turn to the portrait
    orientation. Almost certainly you accidentally pressed Ctrl-Alt, and
    an arrow key.

    Rotate using these keys.

  • Satellite Pro P300 - Fn + f5 combination does not change the monitor

    On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor.

    If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as a single monitor)

    Thank you, best regards,.

    Davy

    Hello

    In my opinion the previous action (installation of the catalyst hotkeys and reinstalled the hotkey driver) is the reason why the FN + F5 does not work properly.

    In my opinion, you should clean the registry first.
    Use CCleaner. It s free and cleans up the registry.
    In addition, you must remove the catalyst shortcut keys because this may affect the Toshiba FN Hotkey feature.
    Finally, install the Toshiba drivers from the Toshiba page
    More info (right on the Toshiba driver page), you will find details on the tools simple and drivers and what are they for...

  • U2415 - when I changed the monitor upside down I hear something like a screw wandering inside.

    Greetings from the Greece. I apologize for my bad English. Has just delivered my new u2415. But when I turn the monitor upside down, there is something like a screw that moves from one side of the screen to the other.  The monitor works perfectly when it is plugged. The warranty covers replacement with a new or not? Or just a new one?

    Policy of Dell on monitor to nine = trade
    * If the monitor Exchange is configured within the first 30 days of the date of the original invoice, the replacement will be New
    * If the monitor Exchange is configured outside the first 30 days of the date of the original invoice, the replacement will be refurbished

  • Change the colors of the images between monitors while the user interface remains the same

    Hey! Im having a problem where photoshop change colors when I move the window between my monitors, see here: http://sta.sh/04y5s60vf3j is not due to the monitors themselves being different, it does actually change after a few seconds to move inbetween the monitors. The left was callibrated with an elite group of spyder 3 I do not have access to. I applied the file with windows instead of the utility of spyder color management. The second is new, and it is not callibrated by what that is, but instead was done by hand with integrated RGB brightness/contrast/custom settings. Two of them are very close to eachother, so enough for my taste. but when photoshop changes which looks like the image, it is causing problems. Curiously, when I disable calibration of the screen on the left, the image doesn't change color between monitors, but instead always appears as it does on the right. but then they do not match to the top and all the screen looked washed out because it's uncallibrated, so that won't do me any good. Something else interesting to report, is when this image is saved as a. JPG and read with firefox, the image appears exactly as the monitor on the LEFT (which is my primary monitor) despite the monitor left which is the force has changed. does anyone have any suggestions? It also appears that photoviewer windows behaves in the same way, although firefox does not work. Meaning when I open an image in all 3 on the left monitor, they look alike, but when opened on the right monitor, windows photo viewer and photoshop both display the image such as the brighter and redder that firefox works. It's frustrating, because it seems that photoshop changes the image with my measured on my monitor left to match what it looks like on the web, it does. but it does not for the monitor right, or the left is uncallibrated. Another question, I can see with this is even if the user interface is the same shade of gray, the images are different between the monitors because of this change. Does anyone have suggestions?

    -BD

    What you need to understand, is that Photoshop converts the image data, the document profile for the display profile, independently for each display. It is a managed pipeline standard color display. Windows Photo Viewer does the same thing (but do not have a lot of other applications).

    When you move a picture on the screens, it snaps when you drop; as the new display profile is picked up.

    Calibration is only partly about changing the monitor's response. The second part a profile, which is a complete description of the screen in its calibrated State. Then a conversion of standard profile is performed as he goes to the screen. The profile has a much higher level of accuracy than the single calibration.

    ---

    If the image on the web has the stripped document profile, Firefox with default settings does not have this conversion and sends just the unchanged data to display. In other words, it is not color managed. This behavior can be changed, but get your first straight base display profiles. Unless you get a new calibrator it is no that you can do to match these two views.

  • my computer turns on but the monitor shows saying no signal?

    It only beeps because I know not if it did which could be my ram whitch works well don't understand why it does not work.

    I turn on my pc and you can see her on because I can hear and see the CPU fan and the other fan turns but I get on my screen no signal, I tried to get out of ram cleaning it and then put in still do not work. The computer is ever damaged or nothing is a great and had pc for a few years until now its says no signal.

    I tried my graphics motherboard both my own graphics card and still does not work. Help, please.

    Hello

    As you do not do anything on your screen at all, it seems to be a hardware problem.

    It's the order of things to monitor to the motherboard:

    Monitor > cable > Port > that is either connected to a graphics card in a slot on the motherboard or integrated graphics hardware that is part of the motherboard.

    You can try to change the monitor, cable, then graph of place for good.

    You don't say if you receive an error 'beeps' at startup, which would give an indication of what went wrong.

    "Beep" is what's supposed to happen.

    If this isn't the problem:

    If under warranty, contact the manufacturer.

    If it is not under warranty, contact a repair shop, local.

    See you soon.

  • Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

    The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

    I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

    The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

    I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

    What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

    I'm talking about a window similar to this one
     
    http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

    Try changing the backup.ini

    you find it in

    .. \Program files (x86)\MozBackup\backup.ini

    Open the file backup.ini with editor

    Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

    Change the value of "1": monitor

    wyzodir =

    ; Monitor: the monitor number where MozBackup window will appear

    monitor =1

    '2' or whatever the value of your primary monitor is:

    wyzodir =

    ; Monitor: the monitor number where MozBackup window will appear

    monitor =2

    System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

  • Is it possible to change the screen on the start screen opens?

    I have a display dual display. I have #1 monitor set as my primary monitor only things as applications will launch on its default screen. Windows 8 at the opening of the splash screen, I prefer the start screen not to obscure everything I did on the primary monitor. (for example, to watch a movie) I prefer the start screen to open on the second monitor. Is this possible? I got tired of things like changing the monitor #2 to be primary, but the splash screen was again launching on monitor #1. If it can't be done through the registry or any other method, I guess I'll have to try rewiring all my screens. However, it would be only a temporary solution to stop that brings me to my follow-up question.

    I intend in the future to get a screen touch little 7pouces that I connect to my computer such as one-third of the screen and I would have 8 launch windows startup screen and stay on this screen all the time and all the apps I launch from windows 8 start screen to show on the main screen of my #1.

    Or the other of the above can be done?

    in the lower left corner of two monitors, if you move your mouse, you will have the option to open the splash screen. All this on the monitor you want to it load on and it will stay on the screen until you decide to change

  • How can I change the size of my screen so the arrows left/right and tr side slide bar is visible. my monitor is 17 '' and the program opens too big, Pls HELP!

    My screen is bigger than my monitor 17 ". The right side is off the screen, so I can't scroll. I can barley click the left arrow to return to the previous page. Help! I've been waiting. !!!

    Hello

    see if the monitor has a reset button auto on it

    and read this;

    try changing the screen resolution 1 before update drivers

    It can only be the screen resolution settings

    try going to your graphic card manufacturers site or computer and are looking for the driver download section

    Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

    then try to make the screen of solution of problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

    Change the screen resolution

    Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

    For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.

  • I can't use my keyboard unless I click on tool palette on my second monitor. I'm under 10.10.4 CS6. Basically - once I click the mouse in brush, stamp, etc., I can't cancel, fast replacement of tools, change the size of the brush etc. unless I click on th

    I can't use my keyboard unless I click on tool palette on my second monitor. I'm under 10.10.4 CS6. Basically - once I click the mouse in brush, stamp, etc., I can't cancel, fast replacement of tools, change the size of the brush etc. unless I click on the tool palette. Had this problem for months. Don't know what to do. Going to lose my mind.

    Have you installed the WhiteWindowWorkaround plugin to work around known issues in Mac OS?

  • You can change the default size of the monitor of video in EP 13 window?

    Please can someone confirm if it is possible to change the default size of the clip in the first elements 13 monitor window. The research of this issue brings an answer to someone who asked the same question about EP 7; the answer would then open the clip monitor window, adjust its size and then let it open for the duration of the editing session. Is it still valid for PE 13, or is there another way to adjust the default size of the window so that the next session opens to the same size as the last one? Help appreciated.

    CD.

    Technically, no. When you double-click a clip, it will appear roughly the same size, in the center of the interface.

    My solution, however, is to open the monitor Clip and then let it open, stop on the side. (I have a dual monitor computer, so I can move it away from the rest of the interface if I'd like.) As long as it remains open, it will stay in the same place and size that you double-click to open other clips in it.

  • How can I change the font size and contrast of my monitor

    I want to make the letters bigger and darker

    The following .pdf file might be worth a visit:

    Windows Vista - customization of display properties
    http://www.AbilityNet.org.UK/wrap/docs/Windows_Vista_-_Personalise_the_Display.PDF

    Another option...

    How to change the font size in Windows Vista
    http://www.vista4beginners.com/how-to-change-font-size

  • change the size of the screen

    How can I change the size of the screen in Apple Mail? At the opening of Apple Mail, screen completely fills the screen of the monitor. It is a simple question, but how do I get the screen to go back to a smaller size?

    Point to any corner until you see an arrow in place and move the cursor. Click and hold and drag

  • Photos for wallpaper are too big. How can I change the size to fit?

    Photos for wallpaper are too big. How can I change the size to fit?

    Hi demetman,

    Welcome to the Microsoft answers community site.

    Follow the steps below to set the desktop background and select the image to fit the display screen

    1. open the wallpaper by clicking on the Start button , by clicking on Control Panel, appearance and personalization, personalization, and then clicking desktop wallpaper.

    2 click on the image or color you want for your background.

    If the image you want to use is not in the list of background images to display, click the location of the image downwards arrow to view other categories, or click Browse to find the picture on your computer. When you find the image of your choice, double-click it. It will become your desktop wallpaper and appear in the list of desktop backgrounds.

    3. under how the image must be positioned, choose to have the picture fit the screen, tile, or be centered on the screen and then click OK, you can choose here to adapt to the screen.

    Microsoft reference Article: http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-desktop-background-wallpaper

    I also suggest you check these Microsoft Windows Help & How - Articles:
    1: change the screen resolution
    2: get the best display on your monitor
    3: change your desktop wallpaper (wallpaper)
    4: Customizing the desktop: recommended links

    Let me know if it works. Good luck!

    Hope this information is useful.

    Thank you and best regards,
    KKS Vijay

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • How can I change the size of the image on my TV screen?

    original title: screen size

    How can I change the size of the image on my screen? I connected my laptop to my TV via a HDMI cable. I don't see the bottom top or side photo ei portionso: can not see the bar of tasks or x box. I lowered the resolution of the screen to something 720. but did not change the size of the screen

    Hi kimhealy


    You have set display up-to-date drivers installed?


    Method 1:

    Step 1 :
    To resolve the problem, you can check if uninstalling and reinstalling then the display driver allows.
    Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

    a. click Startand then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    After the computer restarts, the drivers will be installed automatically.

    Step 2:

    If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.


    You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly


    Method 2:
    If you are on windows media center, you can also refer to the link below and check.

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-improve-the-image-on-my-monitor-or-TV

    See also below the link-help

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

     

    I hope this helps.

Maybe you are looking for

  • Selection drop-down menu does not work on "display".

    33.1 Firefox latest and before that had the problem If I go to 'view' then 'zoom in' or 'sidebar' or 'toolbar' nothing shows.also can not copy or paste on / in the address bar. works fine in safe mode. But I can not disable add ons becausethose disab

  • Setting up Apple tv and stuck on the connection to the network screen

    Apple TV has tried to connect to my wifi.  He was slain on the connection to the screen of the network for 30 minutes.  No error message, just stuck.

  • Problems of Lenovo Z575 intermittent wireless connection.

    Hi, I have a Lenovo Z575 with the following specifications. CPU: AMD A6 - 3420M GPU: ATI 5520G 4 GB OF RAM HARD DRIVE 500 GB Wireless adapter: Ralink RT3090 802.11n I have a question where the will of laptop successfully connect to my wireless networ

  • How to read several channels simultaneously with a minimum

    Hi all Please see the attached file. In fact, this is a simplified example of my real application, I didn't understand the second half to reduce the complexity. As demonstrated, I have two entries of analago I need to read (position and acceleration)

  • System 32 errors

    My computer tried to download Service Pack 2 for Vista, but something was wrong, and he has not finished downloading (I think my computer has crashed). Because of this error messages keep popping updo to with 32 being absent or corupted system parts.