change the ssid on the wireless router

Similar Questions

• get the status of 4500 printer wireless hp envy line after changing the wireless router.

  I use 8.1 window and I want to HP 4500-e printer all in one and all a works very well. My wireless router was going bad, so I replaced it. After the installation of the new router and get all my computers and devices (including the hp 4500 wireless printer) connected to the new network, I tried to print. The printer is waiting to print which was sent to her, but its status is set to offline mode. The box in the sign that says "set printer to run in offline mode" is not checked. but the status says HP ENVY 4500 SERIES (NETWORK) - in offline mode.  Anyone else has this problem and do you know how to solve this problem. I tried to turn off the computer and the printer and restarting their and running a hp Diagnostics program, but he says that everything works fine.

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Connection printer HP Photosmart C4500-serieis to the wireless router.

  I had to reset my router and in so doing, he has changed the SSID and I had to change the password.  My laptop is connected to the wireless router, but my HP Photosmart C4500 printer does not recognize the change. How to re - setup the printer with the new information.  I tried all the wifi settings available on the printer with no luck?

  I have run the wireless network test report and he has failed in trying to recognize the SSID

  Thank you

  Hi you two,
  
  I recommend you try printing HP and doctor Scan. It's a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity. Click on the link below for more information on how to download and run the tool:
  
  http://goo.GL/QsIAx

• Tecra M2 can't see the wireless router

  I have a Tecra M2.

  I see our home wireless router and all our neighbors Wi - Fi, but very often the laptop does not see our router. The only way to solve this problem at this time is to plug the Ethernet cable and change the wireless channel.
  He can see the router but after a while, he stops seeing the router.

  There is nothing wrong with the router as my laptops of business is never a problem given the router and my laptop s son.
  Help, please!

  What operating system do you use?
  Have you installed the latest WLAN driver?
  Have you tried changing the WLAN settings on your router?

  Try changing the settings of the router. Experiment with different settings. It is not easy to give a precise answer.
  What we know, it's that you have Tecra M2 and anything else that may be useful to understand your problem.

• HP 5530: Printer does not recognize the wireless router

  Printer worked so well. Moved and changed via AT & T Uverse and printer HP 5530 network will not recognize the wireless router information. I uninstalled the printer from my ASUS laptop and tried to reinstall nothing doesn't. The cd supplied with the printer woould check not the printer again. The printer is less than a year. I don't know what is happening. Can you help me solve this problem?

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HP Officejet Pro 8500 has more: impossible to reconnect to the wireless router

  Have had the printer for four years. Has been connected to the wireless router earlier today.

  When I try to set up the connection again, he asks for a WPA key.

  He never did that before, just asked the network password.

  From bottom of router WPA, it matched correctly, get the error message saying "authentication failure".

  Several attempts, same error.

  Reset setting factory (menu) wireless - no change.

  Restarted printer - no change

  Restarted router - no change

  Hello

  WPA key is your network password.

  Kind regards.

• E900 - how to change the wireless channel?

  Hello people!

  I just bought a router Linksys Cisco E900 and hooked it up to my cable Internet. The Internet service that gives me my ISP is PPPoE, fiberlink (100 Mbps).

  I did the whole upward. I've connected my computer (via Ethernet cable) and my laptop (via radio) to the router.

  Now... There are other networks wireless around me. The Wi - Fi channel that my fixed router 1 is apparently - he saw settings. But I can't find a menu anywhere in the gateway of the router (192.168.1.1) I can change the wireless channel bandwidth wireless etc. Can someone tell me if I can change them...? If so, how? If not... that the steering wheel...

  Thanks in advance.

  Check the screenshots below.

  

  

• HP photosmart 5520 cannot connect to the wireless router

  The printer has worked I went on holiday, and now it will not work. I have run the wireless network test, and it says "hp printer is unable to connect to your wireless router.  The wireless router is connected and works fine.  My hp wireless computer (windows 7) works very well.

  The structural 'found ssid network name' report, said down

  But "current configuration" has shown the SSID

  can anyone offer a fix?

  Help

  colleenmercy

  Hi colleenmercy,

  In the network menu, select default network.  This reset the current network settings and will help you reconnect the printer to the network.  You can use the Wireless Setup Wizard or reinstall the HP software to reconnect.

• C4780 cannot find the wireless router

  I have a new iMac and old Toshiba that is running Windows XP and you use a Netgear wireless router.  When I got to the printer, it worked fine on the wireless network.  Bought a new router that I couldn't work with the Mac and the PC so I returned to my original router.  Now, the printer does not work as a wireless printer.  Summaries of diagnosis indicates that the printer cannot find the wireless router and fails under "Network Name (SSID) Found."  On the Network Setup page, my network is listed as a network discovered by the printer.  I guess there is a simple solution and hope to find the answers here.

  Thank you very much!

  Some printers C4780 left the factory with a default misconfiguration.  This could be the reason why you can not see the hpsetup network.  Here is an updated set of instructions for manually adding the C4780 to a Mac:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  Press the Scan button to get the wireless settings

  Select wireless Menu

  Select wireless settings

  Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks then ShowAll bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  The printer Web page, select the network tab, and then select Wireless (802.11).  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• I received a message on my laptop computer that says not able to connect to the wireless router.

  I received a message on my laptop that says could not connect to the wireless router and it make reference to section of the knowledge base Microsoft 87112 for more information.

  I think you have transcribed the number incorrectly.  I think that the article you want is this one: http://support.microsoft.com/kb/871122

• Signature problems, the wireless router.

  I have a problem of signing on the internet through a Linksys WRT54G2V1 wireless router model. I use Windows Vista Service Pack 2. When I start my computer, it is not the sign on the internet, even if it is connected to the wireless router. Address ip/4 shows 169.254.42.23. After I unplug the router for 20 seconds and then plug it in again, my computer will sign it on the internet. 192.168.1.100 is the ip/4 address. In the meantime, my wife's computer has no problem signing on the internet via the wireless router. When I start my computer, it uses the address 169.254. He has only started to do this recently. What should I do to fix my sign on the problem?

  Hello

  Have you tried the steps suggested by Yakub K for the same problem?

  If this isn't the case then try the steps and let us know the results.

  Put on the link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/problems-while-trying-to-access-internet-using/21c0ea5f-5ce7-4d9a-b4bd-28fafa4d023e.

• Black screen on startup after installation of the wireless router

  I recently installed a Netgear Wireless - G Router (WGR614) on my computer vista HP laptop and since then, I have experienced a few problems. One day my computer was working fine. I stopped it and when I went to leave the next day morning, the screen was black with a bunch of small lines. It would not load anything so I stop and tried again. It's the same thing. I turned on and close my count, and when I opened it upward a few minutes later the screen was beautiful. Then, I have lived the "Blue Screen of death" 3 times. I researched what the problem might be and thought that I might need to update a driver. I went to HP Health Check and there were a couple of updates on a wireless adapter and a card reader, so I installed the updates. I have not experienced the blue screen since then, but I still have problems with the black screen when starting upwards. If I leave the computer open the black screen turns to a white/blue color and nothing loads. But if I close it then after a minute or two everything is. This could be the cause?

  Hello

  Start with the wireless router is not the cause of the problems. It is a stand-alone device that simply provides a network connection for your system. Offhand, I would say that you experience a hardware failure, and perhaps the time is simply coincidence. Knowing what was the error message stop can help to indicate where the problem lies, but your description of the problem is quite indicative of a hardware problem. Solve it will probably require involving a technician (contact HP if it is still under warranty).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Connect Windows Vista to the wireless router

  installed the wireless router. How to connect my computer laptop tosiba windows vista to use without being plugged >

  Click Start, connect to, select your wireless router, click on the 'Connect' button below.

  I hope I could help

• computer does not receive a response from the wireless router

  The wireless router sees my computer wireless MAC address, but never assigns an internet address. Can anyone tell me what the Protocol of communication happens. Could help me solve the problem. Thank you.

  ROCKST * R, I saw your answer on the firewall, so I advanced and off. Now, I can connect to wireless internet. I.m a happy camper. Thank you.

• printer photosmart-309 is not to find the wireless router

  printer photosmart-309 is not to find the wireless router.

  the wizard will search, then once outside.

  the radio is on.

  suggestions?

  Sorry, but your wireless radio is dead.  You can always connect via Ethernet to your router.

• Mac Lion will not configure Deskjet 3050 a to the wireless router. Have installed software HP 3 times.

  My Deskjet 3050 series J611j was ooriginally configured with Mac OS Snow Leopard. I have since installed Lion (10.7.3). I inadvertently reset the default printer and it stopped connecting with the wireless router.  I installed the new software HP Lion but when I go through the installation, after that I tell the printer to connect to the router, I get a message saying that the device is not connected to the computer and connect with a USB connection. But it is connected with a USB cable.

  I fixed it by pulling on an old PC and launch the CD. Who got up the printer on the wireless. from there, I could finish and connect with the Mac.  Thank you.