change the static IP address after the migration

Similar Questions

• Change the user information in R12

  Hi Experts,
  
  I created a user 'follow' in the R12.1.1, now I want to change their e-mail address after login as user "monitor." Please tell me how can I change the e-mail address of the user after logging in as a user by himself and also as sysadmin.
  
  Thank you
  -Nili-

  Hello

  You can update the email by logging in to (responsibility of the system administrator > Security > user > define), or the user's preferences (Note: 746255.1 - SYSADMIN allow preference Change Notification for users of the Web Interface).

  Thank you
  Hussein

• Some components missing CUCM sauvegardΘ after you have changed the IP address of a Subscriber

  a strange problem with cucm backup... After we migrated the cucm one taken sub. from one place to another and changed the ip address, some components were not in the backup, including TFTP

  Backup successfully(100%) finishing, but when we check some five components were not in the backup.

  When I searched in Cisco site, I received the following:

  "Sometimes, after an upgrade, some services are not registered to DRS.

  Workaround

  --------------------------------------------------------------------------------

  Step 1 during the maintenance window, log on to the server in the CLI editor and run the utils disaster_recovery show_registration servername command.

  This command lists all the components registered with DRS for the backup on the server for the specified Subscriber.

  Step 2 disable and re-enable any component that is not registered to this server backup.

  Step 3 run the utils disaster_recovery show_registration servername command again to check the component is registered for backup. "

  Can someone help me with the command to disable and enable a backup component?

  Thanks in advance,

  Fox.

  You have to basically disable & re-enable the service associated with this component not registered. for example if TFTP is a constituent unregistered, then disable & re-enable the service TFTP Cisco of the activation of the service. Then CLI, issue command 'utils disaster_recovery show_registration' & you should see the TFTP component registered with DRS.

  Similar procedure must be done for the other missing items.

  GP.

  Pls rate helpful messages by clicking on the stars below the post!

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• Changes to the network when the reconfiguration of the DHCP server to the static IP address

  I installed new positions of work on my network and had WDS push the image so we have installed DHCP to do this. After all the work stations were Setup, I started to change static IP DHCP on the workstations as we prefer to use static IP addresses.  Some computers work fine, some don't. The problem I have is when changing from a static IP, as active network passes the network of the area to the Public network. However, when it is configured to use DHCP, the active network is the domain network. What am I, I missing which will cause the active networks of change to public networks at the static IP change? I checked the settings ip IP, Subnet, DG and DNS and they seem correct. I tried to withdrawal, join. I tried the update NIC driver. I tried to uninstall the NETWORK adapter and reboot. If anyone has seen this before?

  Hi JFK @,.

  Thanks for posting your query in Microsoft Community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro/

• Cannot change the default IP address after the upgrade to 4.1

  We just migrated a client 4235 ID version 3.x to 1.0000 S47 using the Ugrade/Recovery CD 4.1

  We try to apply the basic configuration as change the host name & IP address using the command CLI "SETUP." Whenever we apply the changes by selecting the appropriate item (2 - save this configuration configuration and output), im getting this error "error: could not restart network services.» Unrecoverable error occurred. Node MUST be restarted to activate alarming. »

  Below is the output that we captured during the initial configuration process:

  Installing sensor #.

  -System Configuration dialog box-

  At any time you can enter a question mark '?' for help.

  User ctrl-c to interrupt the configuration at any prompt dialog.

  Default settings are in square brackets "[]".

  Current configuration:

  networkParams

  IP 10.1.9.201

  netmask 255.255.255.0

  Passerelle_par_defaut 10.1.9.1

  sensor hostname

  telnetOption disabled

  accessList ipAddress 10.0.0.0 netmask 255.0.0.0

  output

  timeParams

  summerTimeParams

  Active selection no

  output

  output

  Web service server

  General

  ports 443

  output

  output

  Currently: game Aug 26 10:13:29 2004

  Last modified configuration: Thu Aug 26 10:12:46 2004

  Continue with the configuration dialog box? [Yes]:

  Enter the host name [sensor]: IDS02

  Enter the IP [10.1.9.201]: 10.1.2.4

  Enter the network mask [255.255.255.0]:

  Enter the default gateway [10.1.9.1]:

  Enter the server telnet [disabled] State:

  Enter the web server port [443]:

  Change the current access list? [None]:

  Change the system clock settings? [None]:

  The following configuration has been entered.

  networkParams

  10.1.2.4 ipAddress

  Passerelle_par_defaut 10.1.9.1

  hostname IDS02

  accessList ipAddress 10.0.0.0 netmask 255.0.0.0

  output

  timeParams

  summerTimeParams

  Active selection no

  output

  output

  Web service server

  General

  ports 443

  output

  output

  [0] go to the command prompt without saving this config.

  [1] return to the configuration without saving this config.

  [2] save this configuration and exit.

  Enter your selection [2]: 2

  Error: Could not restart network services. Unrecoverable error occurred. Node MUST be restarted to activate the alarm.

  I'm also the same error on the first ID 4235 we just bought, pre installed with 4.1. We have changed the IP address each time, we get the same error w/c is "error: could not restart network services.» Unrecoverable error occurred. Node MUST be restarted to activate alarming. »

  I just wonder of bec before that, we changed the IP address & front door for a couple of times & we don't have this kind of problem. The IP address change has been done during the test phase of activities & the problem came only when we already have this ID on the production. My client has just need to change the IP address beak of some changes in the network.

  We tried to restart two IDs, but the problem remains.

  I am trying to get some technical info on the site Web of TAC, but I can't find anything.

  Hope you can help me on this one.

  Thank you very much.

  your default gateway is incorrect. fix that, and you should be good to go.

  Thank you

  Chris

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• Cannot recreate the listener after changing the ip address and the name of the server

  Hoping someone can give me some ideas - I do not know what else to try.

  I run a 11.2.0.4 database on windows 2012.  I just got back my database to a new server and am trying to rename the server and assinging the new ip address.

  I stopped all the oracle services and change my servers ip address and name.

  Then, I dropped the listener who has been spending more time than it should have, but when I checked that the service has been removed.

  When I try adding the listener it hangs right on "would you like to configure another auditor?

  Then, I realize very quickly that I forgot to change the environment vairable HOSTNAME and the TNSNAMES file.  I cancelled the wizard still Net and

  fixed files and tried again.  The continuous Wizard to crash at the same place - never time - just hangs.

  Does anyone have ideas, what could be bad?

  Thank you!!

  Kathie

  be sure the two Services of OS for earphone & database have been started & running

  no listener.ora file is necessary to start or use Oracle listener just open the command window and issue after an order

  lsnrctl start

• Cannot change the Contacts after having migrated to Tungsten E2

  Hello

  I recently migrated my old Tungsten e - whose battery life started shit after years of use - to a new Tungsten E2.  To my horror, I found that even if I change the contacts on the Palm Desktop, when I edit existing on my Tungsten E2 device contacts, after that I have make changes & press 'fact - fact-[complete]', the changes I made are not actually saved.  Indeed, I'm unable to change existing contacts on my device.

  After some tests, I found that this problem is true only for my legacy contacts records that have been migrated from my old Palm.  If I create a new contact, the new Tungsten E2 or via the desktop record, I can edit it and make changes without problem on the handheld.  (Note that I can edit notes, back and some calendar entries without problem).

  I have the Palm OS v. 5.4.7 on the device and the Palm Desktop 4.1.4 on the XP PC.

  I suspect that the problem is related to the fact that last spring I upgraded my PC at home and a MacBook Pro for a period months I HotSync my Palm Tungsten E to work on my XP machine and then also home for my new MacBook Pro (I like the idea of two sets of backups).  It worked well in time.  But now that I've migrated to the Tungsten E, I wonder if some not-so - wonderful things were made to my contact records of sync for two different platforms at home and work.  Note for both I used the desktop software Palm native to HotSync (a pleasure on XP, less on the Mac).

  Yesterday, I spent two hours with Palm time support staff via chat online and also on the phone.  After several soft resets, resets hard to export my contact data and then - import, blah and blah, their conclusion was, "sorry, your data is corrupted, we cannot help you.'  Hmmm.

  I am interested in anyone's thoughts on how to solve this riddle.  My bet is it's fixable with the right know-how.

  Thank you.

  PIMLico DbFixIt

  Message relates to: None

• How to change the models of Calc Manager after the migration of HBR

  Hi all
  
  at the moment I'm trying to migrate a planning application classic migration incl. EPMA to CM business rules. Migration worked well, but I'm a model with CM and I don't like the graphic mode... Is there a way to change (HBR Macros) models in script mode? I can switch mode script for business rules, but I don't see the option if I open a Template (custom template set and after the migration of HBR).
  
  Thank you very much!
  Kind regards
  André
  
  P.S.: We are on 11.1.2.1.0

  Currently in 11.1.2.1, it is impossible to set the mode graph script. In the last 11.1.2.2 calc and patch, the default rules of planning will be migrated in order to script. In addition, the model contains a script component that will contain the macro text HBR which you should be able to change. Since the HBR was not deleted in 11.1.2.1, we will not be porting this functionality to 11.1.2.1.

  One thing you can do is to modify the model, remove all graphics components, add a script component, and paste your macro script here. If your model has parameters, you must reference them with []. For example, if the parameter has been param1, then you référenceriez it as [param1] in your macro script.

  Sree - mougel

• Unable to connect to APEX after changing the IP address of the server

  Hello
  
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.
  
  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  
  Thank you very much
  Best,
  Peter

  Hi Peter,.
  >
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.

  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  >
  With EPG, you don't need to make any configuration changes, you have to work on the new IP/hostname.

  You could try running the following just in case wherever it may help, as SYSDBA

  SQL> EXEC DBMS_XDB.setlistenerlocalaccess(FALSE);
  SQL>COMMIT;
  

  See you soon,.

• After you migrate for Dev to Test with LCM, to change the order of forder dataform

  I migrated artifacts all planning with LCM for my Dev environment to test a. There is no error after that the migration, but the sequence of the form forder has changed. I don't want to rebuild the forders by hand, how can I solve this problem.
  Version information: 11.1.1.3.0

  Known problem - 10140764 Bug: FOLDER ORDER DIFFERENCE in THE MIGRE APPLICATION.

  After a migration from the management of the life cycle, the order of directory on the destination application differs from the order of law enforcement source directory.

  Not yet fixed. Reproducible in 11.1.2 as well.

  HTH-
  Jasmine.

• Problem of Listener after changing the host name & ip address of a node

  Environment - Oracle 11g R2 is installed in the OEL 5 (node Oracle VirtualBox). Voluntarily, I changed the IP address and the host name of the node for use as a node pending. What are the changes that are needed to make in listener.ora and tnsnames.ora file?
  
  Thanks in advance.
  
  Kind regards
  Sandy
  
  Published by: 918868 on October 26, 2012 20:21

  issue following commands OS below

  lsnrctl stop
  CD /home/oracle/app/oracle/product/11.2.0/dbhome_2/network/admin/
  MV listener.ora listener.ora.sav
  lsnrctl start
  lsnrctl status
  # now wait 65 seconds before continuing as below
  lsnrctl service

  COPY orders & results from above, then PASTE it back here

• After changing the IP address of the server licenses and Virtual Center... «not enough licenses...» »

  Hello

  We change the Virtual Center and the license server IP (I saw here how to do it stop Virtual Center, change, delete and add servers... etc...). Now the virtual Center its ok, but when Ive tried to make the cluster, virtual center of reports me a "there is not enough licenses", and I lost the connection to the license server... any ideas?... I reread the license server, restart the Center Virtual/license server... restart the hosts... Remove and add hosts again...

  Thanks in advance

  See the bottom of this knockout under NOTE:

  http://KB.VMware.com/kb/5850444

  Also check that your features licensed licensed Source is always pointing to the correct license server.

• I recently changed my internet provider where I chose Internet cable on the LAN. Is it possible that I can keep my DSL address after I closed my account of high-speed verizon?

  I recently changed my ISP. I moved to internet Verizon DSL cable (Comcast). Will I have to change my Verizon email address, or can I continue to use it? I still have other services with Verizon.

  Ask Verizon. This has absolutely nothing to do with Apple.