Change the thickness of the main grid

Similar Questions

• How dense can the main grid to allow a minor grid?

  Hello NO,.

  on a xy chart, allowing the secondary gridlines (with the lines of the main grid enabled, of course) do not always show them. It seems that no minor gridlines is drawn if there is already "several" main grid lines.

  For example, a chart with 817 pixels of height will be autoscale from 0 to 100 with the major divisions of the 2.5. In this case, no secondary gridlines will be drawn. Change to record the scale shows secondary gridlines, etc..

  It's confusing for the user of a CVI program if it specifies secondary gridlines, but none appear...

  Could NEITHER clarify the exact test? In addition, a statement in the help would be useful.

  Thank you!

  Wolfgang,

  Normally, the number of minor gridlines between two consecutive major grids is a multiplier of the base 10 logarithm of the gap between the main grid lines. However, the chart is also implementing a minimum of 10 pixels between each minor grid line (she is 5 pixels for a digital slide). Therefore, once the gap between the two lines of the main grid becomes less than 20 pixels, no more secondary gridlines are drawn.

  We can go into this much detail using the attribute, because it is possible that this behavior could be adjusted at some point in the (distant) future. But we add a note saying that the number of grid lines is proportional away, and they can disappear completely if the gap is too small.

  Luis

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages - Windows cannot find C:\Windows\system32\rstui.exe «»
  • Recent changes made to your computer: I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?
  • What you have already tried to fix a volume control simple back - I tried things like this before as to cause major problems. I'll do it right the first time.

  Read this tutorial carefully. Hpoefully it resolve issue you. I have no knowledge on this topic. Only offer you a tutorial of a VERY worthy site.

  How to add, change, or remove a drive letter in Vista

  http://www.Vistax64.com/tutorials/114767-drive-letter-add-change-remove.html

  t-4-2

  PS Sorry for the huge impression. A small bug in copy/paste.

• CHANGE THE MAIN ADMIN ACCOUNT: WINDOWS 7

  Hi all

  I want to change the main admin account on Windows 7, so I can remove the second account admin on my machine.

  I put my machine using my admin account but had a problem with and an Adobe program. Adobe technology has created a second admin account, account now appears to be set as primary and I can not change the options for the account, much less delete it but I would like to make.

  Can someone tell me if there is a solution to this?

  See below:

  1. This is my main account, and he's always been. I click on 'manage another account '.

  

  2. He takes me to the screen. I click on "Administrator". Administrator. "

  

  3. no options to change the account are available. This is the account that Adobe technology created AFTER the story of 'Kevin Byers' had been used as my main admin account.

  

  The strange thing is that these options ARE available on my main account. The FIRST account created on this machine.

  PLEASE NOTE: THIS IS THE ACCOUNT I USED TO LOG IN.

  

  So I guess the question is: why was the SECOND admin account changed to primary school, why can't change this back, and why I can delete the account I'm logged in from this account?

  I've been racking my brain and no one I know can help. Searches provide nothing, so if you have anything it would be appreciated.

  Hi all

  I want to change the main admin account on Windows 7, so I can remove the second account admin on my machine.

  So I guess the question is: why was the SECOND admin account changed to primary school, why can't change this back, and why I can delete the account I'm logged in from this account?

  I've been racking my brain and no one I know can help. Searches provide nothing, so if you have anything it would be appreciated.

  Your problem is mainly due to some confusion.

  There is no 'primary' admin account in Windows 7. There are '' integrated '' account called "Administrator". It's still there. You can't create, edit or delete. Adobe technology has not created the it. He simply allowed her.

  You can disable the built-in Administrator account by using the sequence of steps shown below. Before you do, you should create, test, and document an alternative admin account. Why? It's for the same reason that you have a spare key to your House. A lot of people have in diabolical trouble in case something goes wrong with their one and only the account Admin happens all the time. With spare admin account, you are safe.

  1. Log in under your own admin account.
  2. Click the start planet.
  3. Type these letters: cmd.exe
  4. Press Ctrl + Shift + Enter.
  5. Accept the challenge.
  6. Enter the following command and press ENTER:
     NET user administrator / active: No.

• How can I change the main language of a laptop with windows 7 from Spanish to English

  How can I change the main language of a laptop with windows 7 from Spanish to English

  What version of W7 do you run? Ultimate?

  See - http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-to-change-system-language-of-windows-7-home/d58fb37b-cb02-41c8-986f-22582fd35a12 and http://windows.microsoft.com/en-gb/windows7/install-or-change-a-display-language for the detailed information.

• Inserting changes into an intermediate table rather than change the main table on a form.

  
  I am trying to create a process inserts changes the date in an intermediate table for approval, rather than change the main table.  I am currently using 4.2.4. Here's how I went on this subject.

  1. I've created a report interactive and connected the primary key on a form that displays data.
  2. Then I created a button called to request changes that redirects to another page with a form and through the necessary elements of session state.  (Note: I voluntarily created 2 different forms)
  3. I then set the initial values of the elements of the page on the current page based on the page, I went through the session state.

  My problem is that when changes are made and I hit the submit button, which is to send the page using an SQL Update statement, it does not have the intermediate table with new data.  I think it's because I set the source for the page elements as part of the page the previous page, thereby breaking the link to the database columns in my staging table.  Someone knows how to set the items on the form of page items I placed in another page without breaking the link to the database column?  Or is there an other/easier way to do this?

  Change that you attend the process instead of using APEX built DML, to call a specially written block that will take the page objects values and save them to your intermediate table...

  Thank you

  Tony Miller
  Software LuvMuffin
  Salt Lake City, UT

• How to change the main administrator in my CC team?

  How to change the main administrator in my CC team?

  Hello

  I'm afraid that the admin can be modified to your order at the time, but you can add more than one administrator console. You can also consider to reorganize with the correct email address.

  To add multiple administrators, see help here - manage your cloud creative teams membership

  ^ Ani

• How to change the main administrator

  How can I change primary administrator?

  Hi Steve,.

  I checked your account details.

  Unfortunately you cannot change the main admin on the teams.

  You can follow the instructions given by Pattie in the post above to add a secondary admin on CC teams, but the billing options remain confined to the main admin only email.

  Kind regards

  Sheena

• Change the main administrator of a teams CC account - Licens is purchased through resellers!

  Hello

  According to the guide, if the license is purchased through resellers we have the right to contact Adobe support for help to change the main administrator. Who can help me with this? I have a VIP number for the purchased license.

  Kind regards

  Erik

  Hi Erik,

  Would you suggest to contact customer service and choose the option which best describe your problem and then click always need help! Contact us.

  Concerning

  ~ David

• DV7-3085dx: change the main HDD for Pavilion

  Hello!

  I'm trying to change my HARD drive of the main slot to the second, is it possible to make the second main drive instead of the default value?

  When I turn on my computer right now it says the message "no booteable devices."

  Thank you!

  Of course you can just put the SSD in the main Bay and put a regular hard drive in secondary education, if you have the caddies and cables connection. Just as this guy says:

  https://www.YouTube.com/watch?v=VB-zgFKVAZA

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Change the main administrator

  The lead Director on our account left, so it needs to be changed for me.

  I see that there is in "Team management", then "Licenses" Xs "remove users from this license." What is the way to do it?

  I read a lot of related issues. They all seem to conclude that it is impossible to do unless you contact support.

  Change the primary administrator

  How to move from the role of the Chief Executive to another Member of the team?

  I need to retire as the main administrator for a CC account and give way to another administrator. How should I proceed?

  Chief Executive Officer of change for the cloud team

  How to move from the role of the Chief Executive to another Member of the team?

  The purchase of the CC for the team is since Adobe store directly, in these purchases that the main Admin can not be changed however secondary admin can be added.

  There are certain privileges attached to the primary admin as your billing information console.

  You can cancel this CC & buy new CC team with the desired main admin. Members have just unassigned from their seat & then on purchase costs, they must send invite them again.

  Users must simply disconnect & reconnect once they accept the invite command new CTC.

  Concerning

  Baudier

• Thread problem - after getting thread information, not able to change the main screen

  Hi all

  I'm new BB please help me in this issue

  It is that I have a few options in the menu when I click on the first menu. A thread calls its responsibility is to obtain the list of records and change the field with the new record to the screen, but after obtaining records from the internet, I try to extract the field on the Edit screen but application gives null pointer exception.

  in simple words how to change the field of screens according to new information.

  Thanks in advance

  To expand a little more on this answer, only the user interface thread can access the user interface.

  The API provides several methods to the user interface to perform this work, or to synchronize a different thread with the UI thread.

  See UiApplication, invokeLater (), UiApplicaiton.invokeAndWait (), UiApplication.getEventLock)

• When I change the main mxml file in the project and then export the swf file does not change, why?

  I have an existing project, years ago that I need to change, I am using Flash Builder 4. When I export the project, it creates a SWF in bin-release, then when I change the code in the mxml project file or files of any format and export the swf file needs to change, but it's not. You have an idea why this might happen?

  Thank you

  I found the problem, there was a SWF into the html-template folder within the project. This has led to substitute the swf of the new generation.

• How can I change the main security account for the family to another user?

  My account is current holder of main account in security for the family. Is it possible to change this to another adult? If so, how?

  I tried to search the different help files and this site, but have failed to find an answer.

  Thank you very much.

  Hi Kevo82,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is linked to (Windows Live One Care and would be better suited to the Live One Care Community.) Please visit the link below to find a community that will provide the support you want.

  Maybe it's not the exactly the forum for the security of the family but it is closely relate to Live One Product Care, many experts in this forum be a care products to help a Live question most concerns complicate.
  http://social.Microsoft.com/forums/en-us/category/windowsliveonecare

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.