change the value of down and Boolean key in a test?

Similar Questions

• Changing the values of control over a key

  Hi, I have a situation where I have several digital controls where you can change to different values. I have also several subVIs with references to control (as described in this article: http://labviewwiki.org/Control_References) that takes in the references to these digital commands on the mainVI. These subVIs permanently read values into their own net.

  So whenever I change a value on any of the controls, the values change of course in the subVIs, since they refer to the value of the control.  How I would do the actual value change that once I clicked the ok button?

  To illustrate this, I've done a VI with a structure of the event and another while that continoulsy reads a reference to the control and updats loop indicator. I see some heavy solutions, while I have two controls for each value. The second control would then be hidden and written only in the case of the Ok button, press. But having two controls to do something simple, like this seems superfluous.

  
  

• Changing the values of gray and black objects/type

  If I create a rectangle or some type in Illustrator and he give the values of color (for example) c = 0%, M = 0%, Y = 0 and K = 50% then deselect when I recheck he values change to C = 45.13%, M = 36.1%, Y = 34.83% and K = 1.3%.

  Can someone tell me why this is happening?

  You are in RGB color mode?

• How to change the values of business rule at run time?

  Hello
  
  I'm using Oracle 11g SOA. I did a BPEL process that uses Business Rule. Now the BPEL process is deployed with business rules so how to change the value of the business @runtime rule. I don't want to change the value @design time and deploy the code again.
  
  Is there a console or the portal? as Oracle BAM has own url? What is the url of Business Rule Manager?
  
  
  Thank you

  Can you check is the deployment of "composer" is in Active state.

  In the weblogic administration console, navigate to Environment--> Servers--> SOA_SERVER1--> Deployments (tab) on the left side of the menu.

  Thank you
  Vijay

• Change the value of a Boolean switch rocker during execution

  Hello world

  Is it possible to change the value of a switch to toggle Boolean during execution?

  I make a program where the user can switch a relay switch.  However, I want the program to replace the user input if a measured value exceeds a predefined threshold.

  The program below did almost what I want.  The major problem is that it if the measured value returns below the threshold, the relay will be awarded if the switch is set to 'true '.

  

  I would be very grateful for any suggestions to solve this problem!

  Regards, Martin

  Hi Martin & Asad,

  Well, the problem is even more easy to solve

  After cleaning example of Asad, remove this RubeGoldberg, put in some wait States and make a correct stop button I put in place the example...

• value change event not called on the evolution of the value falling down

  
  Hello

  I have a drop down with values such as... 1-25, 26-50 and so on.

  I need to see the 1-25 as pre-selected when the page is loaded. and when we change the value in the drop down a listner valuechange is called and will service call.

  But when I again selects the default 1-25, at the time where only the value changes listner is not called.

  To show the value that pre-selected I put:-noOfRecSOC.setValue(1);

  noOfRecSOC is the drop down on the screen.

  You must not directly set the value in the UI component. Use the property value drop-down list together for years by default here. Otherwise the value change listener do not notice the change to the original value (as it is never changed).

  You can use a variable temporary pagedef for the value. check out my blog Creating Variables and attribute Bindings to Store values temporarily in the PageDef | JDev & amp; ADF Goodies to find out how to do this.

  Timo

• Change the values of the cluster in while loop and in the face at the same time

  Hello.

  I have a little problem in a test program, that I'm working on. I'll try to simplify as much as possible. I have a cluster control that contains two controls A and B. I want to:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  To change the value of order in the while loop, I first get the cluster control cluster, update the value of the control for a way to group by name and finally rewrite the cluster in the cluster control.

  The problem is that if the user changes the value of the B control while control that is in the middle of the update, the new value of B control is lost because it was read before updating in the face. Is there a way to get around this?

  DennisBengs wrote:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  Then they do not belong in the same cluster.  They are disconnected obviously enough that they do not go hand in hand.

  Where it can get really complicated, it is that you're talking about the user and code changing the same cluster.  It is very dangerous and very difficult to manage.  You might be able to get there with a driving force.  But walk slightly, my friend.

• Check box to change the value of the field and reveal hidden text

  Hello

  I need to change a value in a field when you press a checkbox

  the default value can be $ 10 in 'formfield1 '.

  But when the checbox is checked, the value of 'formfield1' must spend $ 8

  I also need a reval text function in "textfield2' of the text hidden to visible.

  Is it still possible to combine in a box?

  I found a code on the forum and changed it, but it does not work as expected, it affects the field, it shouldn't and it behaves a bit funny, here is the code to calculate.

  I also tried to change the value of Off to On, but who has not reversed the procedure than I hoped.

  Well its a start, maybe someone can understand a give me help on the way?

  ________________________________

  custom for the discount calculation

  var nDiscount = 2;

  name of the Sub total field

  var cSubTotal = "formfield1";

  name of the non-Discount checkbox

  var cbNonDiscount = "CheckBox1";

  default value for the non-Discount

  Event.Value = 10;

  see if the purchase is with discount or not non-Discount

  If (this.getField ("cbNonDiscount") .value == 'Off') {}

  Event.Value = this.getField ("cSubTotal") .value - nDiscount;

  }

  put an end to a custom calculation

  Ah, if you want the calculation to take place when the box is checked, use this:

  If (this.getField (cbNonDiscount) .value! = "Off") {}

  Instead:

  If (this.getField ("cbNonDiscount") .value == 'Off') {}

• I can't change the values of advanced type (exponent and index)

  When I try to use index and exponent my text disappears. First of all, I think that it is related to my font, but when I open Type preferences / advanced, I saw that the values of size and location of the exhibitor and index are nil. Whenever I changed it and they zero tricks once again. I want to reset these values and set as default on a permanent basis.

  Thank you for the answers.

  I use my native language (Turkish) InDesing because Adobe offers student only in the native language edition.

  (I hope that they will also offer English version. Because it's the translation is terrible).

  Default values for new text are defined by making changes with no selected text (and no active text cursor). If there is an open document, the default will apply only in the current document, any document open will apply to all new files. No change in the defaults will change existing text, or the default value for any existing document that is not active at the time the change is made, so all existing files need manual corrections.

• Cannot change the value of mousewheel scroll

  After you have reinstalled windows and all I had on my old desktop, I seem to be unable to change my amount of scrolling the mouse on firefox. I looked through all the troubleshooting questions that have already been posted, and all users have responded that I had to access about: config and change the value of mousewheel.withnokey.numlines.

  However, when you access everything: config, I discovered that not only I don't the integer specified, I don't have any integer with a preferably name that contains "withnokey", so I tried to add it in me, but not to use. Currently my parchment done on lines 6 and 7 and I would like to go down to about 3.

  Hello, Skarlath, the scrolling behavior has been overhauled in firefox 17 (see for reference https://wiki.mozilla.org/Gecko:Mouse_Wheel_Scrollingtechnical information) - the old setting longer reverberate.

  It must still be possible to set a different frame rate. You can enter about: config in the firefox address bar (confirm the message information where it appears), search preferences starting with mousewheel.default.delta_multiplier_ ..., you can double-click on these parameters and assign a different value to - then a restart of firefox is required for the changed settings is taken into account.

• changing the value of the indicator

  I need to change the value of an indicator, while the program is running.

  I enclose a VI

  1. a double is given as input to find derived from ptbypt, and then I compare the derivative (threshold) to enter the value to give a Boolean result.

  I need the user to change the threshold value as required by him.

  Thanks in advance

  Well, use the property node.

  Ran

• change the values of 'choiseListe' with javascript

  Dear Sir

  Is it possible to change the values of 'choiseListe' with javascript.

  Example they have a choseListe:

  Country / / / values

  United States us

  France fr

  Sp Spain

  When he clicks in a botton I whant to change this choceListe:

  Country / / / values

  My Morocco

  PT Portugal

  ............

  Thank you

  Hello

  Drop-down lists and drop-down menus can be scripted against without much to safely.

  You would need something like that in the click event of the button:

  listbox1.rawValue = null; //clear previous choice
  listbox1.clearItems(); //clear the list items
  listbox1.addItem("Moocco", "ma"); //add new list items
  listbox1.additem("Portugal", "pt");
  

  Hope that helps,

  Niall

• Changing the value of a var

  I don't know if I'm asking of this right. is it possible to change the value of a var by pressing a button?
  
  

  cre8ive1974,

  > I use ActionScript 2.0

  Very well.

  > I have a global variable

  By that, I guess you mean a property of the object _global.

  > when I click on a button I want the varaible to change.
  > based on change
  > I want something goes according to what is this variable.

  All right.

  > for example the original global var = 1

  Well, call the name of the variable myVar. You might have
  something like this:

  _Global.myVar = 1;

  > and then press the button and the global var = 0

  Assuming that the name of an instance of myButton button...

  myButton.onRelease = function (): Void {}
  _Global.myVar = 0;
  }

  > then because the global var = 0, something happens

  Where this last part needs to go? Also inside the key? If Yes...

  myButton.onRelease = function (): Void {}
  _Global.myVar = 0;
  Here's something else
  }

  ... otherwise, you could use this "something else" to check the _global.myVar
  property:

  If (_global.myVar == 0) {}
  do something
  }

• Change the value of the radio button using Java Script

  Hi I have a radio button "Process_mode" with two 'ONLINE' and 'Offline' values.
  based on the selection criteria, I will call the process_mode() function and if the user presses the ok button I want to change the proces_mode offline.
  Here's my java script.
  but it does not change the value of the variable.
  Please suggest how to proceed.
  
  function process_mode()
  {
  confirm_msg = confirm ("your search criteria is complex.") It is proposed to submit the application in offline mode. do you want offline? ») ;
  If (confirm_msg is true)
  {
  $x('p2_process_mode').value = "out of the CONNECTION";
  $x('P2_HIDDEN_PROCESS_MODE').value = "offline";
  }
  }
  doSubmit ('BTN_FINAL_COUNT');
  Alert ("your application has been submitted. Please wait until the system processes your request.') ;
  
  Thanks and greetings
  
  Ashok Salimath
  
  Published by: user644340 on July 19, 2009 23:11

  Hey Ashok,

  A Radio element generates actually individual boxes within a radiogroup (this is done by giving the same "name" attribute to each key). Each button has its own attribute 'ID', which will be the name of the option page more "_n" - where n is a number from 0 (zero) - so the first button will be, say, "P1_RADIO_0", then the second will be "P1_RADIO_1" and so on.

  To set the value of the radiogroup and, therefore, article, you need to 'check' one of the buttons - this is done by setting its 'checked' true value. For example, if "Offline" is the second radio button to the P2_PROCESS_MODE element:

  $x('P2_PROCESS_MODE_1').checked = true;
  

  Andy

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?